Philips PET816-93 User Manual

Philips Portable DVD Player PET816

Quick start guide

1

Charge your battery

This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.

1 Slide the POWER switch to the OFF

position (charging of the DVD player only
possible in the power-off mode).

2 Connect the supplied power adaptor cord (or

the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.

➜ The CHG indicator turns red .
➜ When the battery is fully charged, the

indicator turns off.

3 Disconnect the power adaptor cord (or the

car adaptor) when the CHG indicator turns
off.

Note:

– You can also connect the supplied power adaptor

cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.

2

Enjoy (Disc operation)

1 Open the lid of the player.
2 Slide the POWER switch to ON to switch

on the DVD player.

➜ The POWER indicator turns on.
3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and load a

disc with the label side facing up.
5 Close the disc door. Playback will start

automatically. If not, press 2; .

6 To stop playback, press 9.

Note:

– Once the battery is fully discharged, immediately

recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the
battery life.When the power is low, the battery
icon will be shown on the upper-left corner of the
TFT for warning.

2

Enjoy (AV OUT)

Connecting additional equipment (TV
for example)

1 Connect the AV OUT socket on the set to the

video and audio sockets on a TV as shown
directly.

2 Switch on the TV and set to the correct

video-in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a RF
modulator. Please consult your dealer.)

White

Red

Yellow

Not supplied

Printed in China WK0805

TV