Philips PET7432-05 User Manual

Philips Portable DVD Player PET7432
TV
Quick start guide
2
Enjoy
1
Prepare (for in-car use)
1 Attach the main unit and the second screen
to the back of the front seat headrests.
2 Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
3 Connect the supplied car adaptor cable to
the DC IN jacks on the main unit and the second screen, and to the car cigarette lighter socket.
Main unit
AV cable
Cigarette
lighter
Car adaptor
cable
1
Prepare (for domestic use)
Connect additional equipment (TV for example)
1 Connect the AV OUT socket on the main
unit to the video and audio sockets on a TV as shown directly.
Second screen
2 Connect the AC adaptor cable to the DC
IN Jack on the main unit and the power
outlet.
Not supplied
White
Red
Yellow
3 Switch on the TV and set to the correct
video-in channel. You can consult the owner's manual of
your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)
Note:
– This portable DVD player is designed with a
built-in lithium battery to supply power to the player when you are on travel(charging of the DVD player only possible in the power-off mode).
1 Slide the ON/OFF switch to ON to switch
on the main unit.
2 Slide OPEN 2 on the main unit. 3 Remove the protective card (if any) and load
a disc with the label side facing up.
4 Close the disc compartment.
Playback will start automatically. If not,
press 2; /OK.
5 To stop playback, press 9.
Note:
During play, you can: – Press OPTION to select some play options:
audio, subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or
rotate BRIGHTNESS -/+ on the second screen to adjust brightness of screen to match lighting conditions.
Printed in China WK0911
Loading...