Philips PET7432, PET7432-12 User Manual

Philips Portable DVD Player PET7432

TV

Quick start guide

2

Enjoy

1

Prepare (for in-car use)

1 Attach the main unit and the second screen

to the back of the front seat headrests.

2 Connect the supplied AV cable to the AV

OUT jack on the main unit and the AV IN

jack on the second screen.

3 Connect the supplied car adaptor cable to

the DC IN jacks on the main unit and the
second screen, and to the car cigarette
lighter socket.

Main unit

AV cable

Cigarette

lighter

Car adaptor

cable

1

Prepare (for domestic use)

Connect additional equipment (TV for
example)

1 Connect the AV OUT socket on the main

unit to the video and audio sockets on a TV
as shown directly.

Second screen

2 Connect the AC adaptor cable to the DC

IN Jack on the main unit and the power

outlet.

Not supplied

White

Red

Yellow

3 Switch on the TV and set to the correct

video-in channel.
➜ You can consult the owner's manual of

your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)

Note:

– This portable DVD player is designed with a

built-in lithium battery to supply power to the
player when you are on travel(charging of the
DVD player only possible in the power-off
mode).

1 Slide the ON/OFF switch to ON to switch

on the main unit.

2 Slide OPEN 2 on the main unit.
3 Remove the protective card (if any) and load

a disc with the label side facing up.

4 Close the disc compartment.

➜ Playback will start automatically. If not,

press 2; /OK.

5 To stop playback, press 9.

Note:

During play, you can:
– Press OPTION to select some play options:

audio, subtitle, repeat, and time display.

– Press BRIGHTNESS on the main unit or

rotate BRIGHTNESS -/+ on the second
screen to adjust brightness of screen to match
lighting conditions.

Printed in China WK0911