Philips PET721S-12 User Manual

AUDIO IN

VIDEO IN

Philips Portable DVD Player PET721D/S/C

Quick start guide

Charge your battery

This portable DVD player is designed with a

built-in lithium battery to supply power to the player when you are on travel.

1 Slide the OFF

position (charging of the DVD player only possible in the power-off mode).

2 Connect the supplied power adaptor cord

(or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet)

to start charging. ➜ The CHG indicator turns red. ➜ When the battery is fully charged, the

indicator turns off.

3 Disconnect the power adaptor cord (or the car

adaptor) when the CHG indicator turns off.

Note: – You can also connect the supplied power adaptor

cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible.

ON switch to the OFF

Enjoy (Disc operation)

1 Open the lid of the player.

2 Slide the OFF ON switch to ON to switch

on the DVD player.

➜ The POWER indicator turns on.

3 Slide OPEN on the player.

4 Remove the protective card (if any) and load a

disc with the label side facing up.

5 Close the disc door. ➜ Playback will start automatically. If not, press

2;/OK.

6 To stop playback, press STOP.

Note: During play, you can: – Press OPTION to select some play options: audio,

subtitle, repeat, and time display.

– Press

dir ectly to adjust brightness of screen

backlight to match lighting conditions.

Enjoy (AV OUT)

Connecting additional equipment

(TV for example)

1 Connect the AV OUT socket on the set to

the video and audio sockets on a TV as shown directly.

2 Switch on the TV and set to the correct

video-in channel.

➜ You can consult the owner's manual of your

TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)

White

Red

Yellow

Not supplied

Printed in China WK0913

3 OPEN HERE