Philips PET719-12 User Manual

;
TV
AUDIO IN
VIDEO IN
Notes:
;
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Note:
– Once the battery is fully discharged, immediately
recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the
battery life.When the power is low, the battery icon
will be shown on the upper-left corner of the TFT
3 OPEN HERE
for warning.
3 Disconnect the power adaptor cord (or the
When the battery is fully charged, the
indicator turns off.
car adaptor) when the CHG indicator turns
off.
3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and load a
5 Close the disc door. Playback will start
6 To stop playback, press 9.
disc with the label side facing up.
automatically. If not, press 2; .
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
The CHG indicator turns red .
2 Slide the POWER switch to ON to switch on
the DVD player.
The POWER indicator turns on.
2 Connect the supplied power adaptor cord (or
1 Open the lid of the player.
(charging of the DVD player only possible in
the power-off mode).
1
Charge your battery
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
2
Enjoy (Disc operation)
Quick start guide
Philips Portable DVD Player PET716 / PET716S / PET719
Printed in China WK749
2
2 Switch on the TV and set to the correct video-
in channel.
You can consult the owner's manual of your
TV. (If your TV does not have Audio and Video
inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
White
Yellow
Red
Not supplied
1 Connect the AV OUT socket on the set to the
example)
video and audio sockets on a TV as shown
directly.
Enjoy (AV OUT)
Connecting additional equipment (TV for
Loading...