Philips PET718-05 User Manual

Notes:

White

Red

Yellow

– You can also connect the supplied power adaptor

cord (or the car adaptor) to the player and AC mains

(or the car cigarette lighter outlet) directly wherever

possible.

6 To stop playback, press 9.

Note:

– Once the battery is running low (the power

indicator will flash as a prior warning), immediately

recharge it (regardless of whether you plan to use

the battery or not) in order to maximize the battery

life.

3 Disconnect the power adaptor cord (or the

car adaptor) when the CHG indicator turns

off.

5 Close the disc door. Playback will start

automatically. If not, press 2;.

➜ The CHG indicator turns red .

➜ When the battery is fully charged, the

indicator turns off.

3 Press OPEN to open the disc door.

4 Remove the protective card (if any) and load a

disc with the label side facing up.

➜ The POWER indicator turns on.

the car adaptor) to the player and AC mains

(or the car cigarette lighter outlet) to start

charging.

2 Slide the POWER switch to ON to switch

on the DVD player.

2 Connect the supplied power adaptor cord (or

1 Open the lid of the player.

1 Slide the POWER switch to the OFF

position (charging of the DVD player only

possible in the power-off mode).

Charge your battery

This portable DVD player is designed with a

built-in Ni-MH battery to supply power to the

player when you are on travel.

Enjoy (Disc operation)

Quick start guide

Philips Portable DVD Player PET714/718

Printed in China WK731

Video inputs, you will need to purchase a RF

modulator. Please consult your dealer.)

video-in channel.

➜ You can consult the owner's manual of

your TV. (If your TV does not have Audio and

2 Switch on the TV and set to the correct

1 Connect the AV OUT socket on the set to the

for example)

video and audio sockets on a TV as shown

directly.

Enjoy (AV OUT)

Connecting additional equipment (TV

PET714/PET718