Philips PB400 User Manual

Smart soundbar

User manual

Important safety instructions

TV Play

Google Voice Assistant

13

14

5

6

4

Press button for Mic mute on/off.

5

Microphone

6

POWER ON:

Show default input source led indicator
at first time, afterwards, goes to last status
e.g. input source, led indicator, volume
level and microphone mute or un-mute
(Notes: if no actions in 3mins, the source
led indicator will automatically off).

Standby: LED indicator OFF.

When the LED off after no actions in 3
mins, press any key of the remote and
Soundbar except power to show the
status of the source.

4

BLUETOOTH STATUS:

Pairing mode: blue led fast flash
Connected: solid blue
Disconnect: blue led slow flash

MIC MUTE STATUS:

Micphone Mute: 4 RGB Orange

AUX IN STATUS:

AUX IN/Audio in :Solid Green

OPTICAL IN STATUS:

OPTICAL IN ：Solid Red

COAXIAL IN STATUS:

COAXIAL IN ：Solid Purple

Volume Mute:

Press volume mute button on remote, current led

change to white color (keep mute when change

to another source). Press volume mute button

again, led change back to current source led.

GOOGLE ASSISTANT TRIGGER:

System Boost up: 4RGB LEDs show white color

slow breathing.

Factory Default Resetting: 4RGB LEDs show white

constant with fade in 0.5s.

Waiting for hotword trigger: 4RGB led light off.

Hotword triggered: refer to UX google assistant

animations.

During saying voice command: refer to UX

google assistant animations.

Process result of voice command; refer to UX

google assistant animations.

Provide result of voice command: refer to UX

google assistant animations.

Command time out: 4RGB led fast breathing 3times

Firmware upgrade: 4RGB led all white slow

breathing.

Reach Max volume: 4RGB all show white fast flash

for two times.

Remote control

1

2

4

6

7

9

COAX IAL

3

5

8

10

11

1. Button

Switches the unit between ON and OFF modes.

2. Push to Talk

Press to enable push to talk function.

3. Button

Bluetooth Connection

4. VOL + Button

Increase the volume.

5. / /

Short press to control music playback:

prev,track, pause / play,next track.

6. VOL - Button

Decrease the volume.

7. Button

Press to stop music playback.

8. Button

Mutes the unit or resumes the sound.

9. AUX Button

Switch to AUX mode.

10. OPTICAL Button

Switch to OPTICAL mode.

11. COAXIAL Button

Switch to COAXIAL mode.

COAXIAL OPTICAL

AUX

DC IN

COA XI AL

Connect to a COAXIAL audio output on

the TV or a digital device.

AU X

Analog audio input, for example, an

MP3 player(3.5mm srereo).

COAXIAL cable

COAXIAL OPTICAL AUX DC IN

COAXIAL

COAXIAL cable

COA XIAL

COA XIAL

COAXIAL OPTICAL AUX DC IN

COAXIAL OPTICAL AUX DC IN

AUX

COAXIAL OPTICAL AUX DC IN

COAXIAL OPTICAL AUX DC IN

AUX

AUX

AUX

Vol um e le ve l statu s:

One of four RGB led lit up from dim to solid

brightness when volume level at 25% in 0.5s.

Two of Four RGB leds lit up when

volume level at 50% in 0.5s, 1st LED

keep solid, but 2nd LED will lit up from

dim to solid brightness.

Three of Four RGB leds lit up

when volume level at 75% in 0.5s,

the first two LED keep solid, but 3rd LED

will lit up from dim to solid brightness.

Four RGB leds lit up in Max. volume in 0.5s,

3 LEDs keep solid, but 4th LED will lit up

from dim to solid brightness.

AUX

AUX

to select AUX mode.

Environmental Conditions:
Working Temperature 0 ~ 35℃,
Working humidity 65+/-20%RH

Operation Frequency:
BT: 2402-2480MHz, 2.4G
Wi-Fi: 2412-2472MHz
5G Wi-Fi: Band 1:5150MHz to 5250MHz,
Band 2: 5250-5350MHz,
Band 3: 5470-5725MHz
Max. RF output power:
Bluetooth: ≤10dBm, WiFi ≤20dBm

The operation frequency can be used
in Europe without restriction.

For 5150-5250MHz and 5250-5350MHz
frequency band, operations in the
5150-5250MHz and 5250-5350MHz
frequency band are restricted to indoor
usage only.

To maintain compliance with RF
exposure guidelines, this equipment
should be installed and operated with
a minimum distance of 20cm between
the radiator and your body.

9

TV play

Connect your TV to play audio files or music.

What you need

A TV with COAXIAL connector.

A COAXIAL audio cable.

Using COAXIAL cable, connect TV to the

COAXIAL connector on your SoundBar.

Pre ss C OAXIAL on the remo te c on trol to

select COAXIAL mode.

COAXIAL

1

COAX IAL

COAX IAL

to select Blue tooth mode.

TAPB400

purp le

COAX IAL

press and hold on the remote control
to disconnect the currently connected Bluetooth decive.

STEP

1

Availabl e on the

App Store

GET IT ON

Google Play

Google Home

Downl oad a nd run th e Goo gl e Hom e app o n a Ph one
or ta blet. Set u p you r devic e in th e Go ogl e Hom e ap p.

STEP

2

STEP

3

Pai r with any Bl uet ooth de vic e

When the speaker power on, hold the

VOL- and VOL+ button for 15s, the speaker

will power off by itself and reset factory

default settings.

35mm/ 1. 378"

AUX IN(3.5mm): Analog audio input
Optical: Digital audio input
Coaxial: Coaxial audio input
Sampling frequency:
MP3: 8 kHz, 11 kHZ, 12 kHZ, 16 kHZ,
22 kHZ, 24 kHZ, 32 kHZ, 44.1 kHZ,
48 kHZ,
Constant bit rate:
MP3:8 kbps - 320 kbps

560 X 65 X 107mm

2x2.25" full range

+2xL120*W50mm passive radiators

Bluetooth profiles: A2DP,AVRCP,
GAVDP,DID
Bluetooth version: 4.2
Frequescy band/Output power:
2402 - 2480 MHZ / ≤12 dBm

13

14

The Blu etoot hword m ark and l ogos ar e regis tered t radem arks ow ned by th e Bluet ooth SI G, Inc.

®

and any u se of suc h marks b yMMD Ho ng Ko ng Hold ing Lim itedi s under l icens e. Othe r trade marks

and tra de name s are tho se ofth eir res pecti ve owne rs.

Googl e, Goog le Home , Googl e Play, Chr omeca st Buil t-in, a nd othe r relat ed mark s and log os are
trade marks o f Googl e LLC.