Philips OR7200/10 user manual
Always there to help you
Question?
Contact
Philips
Register your product and get support at
www.philips.com/welcome
OR7200
User manual
Contents
1 Safety 2
12 Product information 18
Amplier 18
Tuner 18
Speakers 18
General information 18
2 What's in the box 3
13 Notice 19
3 Connect power 4
Compliance 19
Care of the environment 19
Copyright 19
4 Turn on 5
5 Set the clock 6
6 Listen to FM radio stations 7
Search for a radio station automatically 7
Search for a radio station manually 7
Store radio stations automatically 7
Program radio stations manually 7
Display RDS information 8
Adjust FM settings 10
7 Listen to DAB radio stations 11
For the rst time use 11
Program radio stations 11
Display DAB information 12
Use DAB menus 12
8 Use system menus 14
Check the current software version 14
Reset the product 14
Upgrade the software 14
9 Listen to an external device 15
10 Adjust the volume 16
11 Troubleshooting 17
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
1EN
1 Safety
Read and understand all instructions before you
use this product. If damage is caused by failure
to follow the instructions, the warranty does
not apply.
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact the Consumer Care
to have the product checked before use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, make sure that the power
voltage matches the value printed on the
back of the product. Never connect the
product to the power outlet if the voltage
is different.
• Never expose the product to rain, water,
sunshine, or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or re.
Risk of injury or damage to the product!
• This product shall not be exposed to
dripping or splashing!
• Do not place any sources of danger on this
product (e.g. liquid lled objects, lighted
candles).
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Risk of overheating!
• Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
• Make sure that curtains or other objects
never cover the ventilation slots on the
product.
Note
The type plate is located on the back of the product.
•
2 EN
2 What's in the
box
OR7200
User Manual
3EN
3 Connect power
4 EN
4 Turn on
Press the knob or turn the SOURCE knob.
»» The product switches to the last
selected source.
• To switch the product to standby
mode, press the
knob again.
5EN
Loading...