Philips Optimus AgenT User manual

XRGSCOPE AGenT comments

File File

Open Data File

Start Macro Recording

Stop Macro Recording

Execute Macro

Load Macro

Save Macro

not supported anymore, screens
are stored in xxx.txt format and
can easily be read with WIN
editors

not supported anymore, does not
help for troubleshooting

not supported anymore, does not
help for troubleshooting

not supported anymore, does not
help for troubleshooting

not supported anymore, does not
help for troubleshooting

not supported anymore, does not

help for troubleshooting
Customer Data Customer Data saved as xxx.txt file now
Exit Program Exit

Program Program

Date and Time
Mains data

Mains Data / Date & Time

Tubes / Tube 1…3 Tubes / Tube 1…3
Tube 1…3 Speed Selection Tube 1…3 Speed Selection
Tube Limits Tube Limits
Capacitance Tube Connection
Tube Operating Modes

Capacitance / Operating Modes

Disable Tube Disable Tube

Registration Devices
RGDV 1…8 Data Set A / B

Registration Devices
RGDV Interface Assignments

RGDV set A+B
RGDV 1…8

RGDV Interface assignment
Bucky/Tomo

Dose Rate Control > AMPLIMAT
> Sensitivity

Dose Rate Control > AMPLIMAT
> Chamber 1…5 > Data Set 1…5

Dose Rate Control > Sensitivity

Dose Rate Control > Amplimat
> Chamber 1…5 > Data Set 1…5

Dose Rate Control
> Image Intensifier

Dose Rate Control
> Fault Exposure Detection

Dose Rate Control
> Image, Fault & CONT

Dose Rate Control
> CONT

Fluoroscopy Curves Load Fluoroscopy Curves

Application Limits
> X-Mode Limits

Application Limits
> Thoravision Limits

Application Limits
> Overload dependent Limits

Application Limits
> X-Mode

Application Limits
> Thoravision

Application Limits
> Overload dependent

Human Interface
> Select Language

Human Interface
> Language

agent-xrgscope-dictionay.doc Dec – 05 – 2003 page 1 - 4

XRGSCOPE AGenT comments

Human Interface > APR Data Set
> Select APR Data Set

Human Interface > APR Data Set

Human Interface
> APR Data Set

direct access to the data set of the

selected highlighted APR
> Change APR Data Set
Human Interface > APR Data Set

> Inquire APR Assignments
RGDV related Assignments

> RGDV 1…8
> Predefined Assignments

RGDV related Assignments
> RGDV 1…8
> Manual Assignment

including all submenus

not supported anymore, covered

by APRMAN

not supported anymore, covered

by APRMAN

not supported anymore, all

functions for menu and APR

structuring covered by APRMAN

RGDV related Assignments
> RGDV 1…8
> External APR Assignments

Human Interface
> APR modifiable by User

Adjust Adjustment

Tube Adaptation Tube Adaptation
CAN Auto Configuration CAN Auto Configuration
Area Exposure Product

> Specific Yield of Tube 1…3
Area Exposure Product

> Add Filter Correction Tables
Area Exposure Product

> Wedge Filter Correction Tables
Dose Rate Control

> TDC Amplimat
Dose Rate Control

> Amplification gain
Dose Rate Control

> CONT kV mA manual

Area Exposure Product
> Spec. Yield of Tube 1…3

Area Exposure Product
> Add Filter Corr. Tables

Area Exposure Product
> Wedge Filter Corr. Tables

Dose Rate Control
> TDC Amplimat

Dose Rate Control
> Amplification Gain

Dose Rate Control
> CONT kV mA Manual

not supported anymore since it is
Boost Adaptation

part of the adaptation procedure

anyhow

Accept Acceptance

Backup
> RGDV related Assignments
> RGDV 1…8

Backup
> CU Complete

Backup
> direct file access

Restore
> RGDV related Assignments
> RGDV 1…8

Restore
> CU Complete

Restore
> direct file access

not supported anymore, covered

by APRMAN

not supported anymore, covered

by APRMAN

Inspect
> Tube 1…3 Statistic
> Show Tube Statistic

Inspect

Inspect
> Tube 1…3

including reset function

> Tube 1…3 Statistic
> Reset Tube Statistic

Generator Statistic

Inspect
> Type of Tube 1…3

Inspect
> Tube 1…3

not supported, has no information

anyhow

including tube type display

agent-xrgscope-dictionay.doc Dec – 05 – 2003 page 2 - 4

XRGSCOPE AGenT comments

Faultfind Fault Find

Power ON Results
> Options

Power ON Results
> Internal CAN Configuration

Power ON Results
> SW/HW - Versions

Power ON Results
> Options

Power ON Results
> Internal CAN Configuration

Power ON Results
> SW/HW Versions

Logging Table
> Error Log
> Error Log Index

Logging Table
> Error Log
> Select Error Detail

Logging Table
> Error Log
> Error Log Detail

Logging Table

Error Log

direct access to error details by

double clicking the error line

all error lines can be marked to get

all details at once

Clear function included in Error

Log screen
> Error Log

> Error Log Clear
Logging Table

> X-Ray Log
> Tube Temperature Supervision
Logging + sub-functions

Logging Table
> X-Ray Log
> Dose Rate Control Logging
+ sub-functions

Logging Table
> CU Trace

Advanced Checks

X-Ray Log
> Tube Temperature Supervision
Logging + sub-functions

Logging Table
> X-Ray Log
> Dose Rate Control Logging
+ sub-functions

Logging Table
> CU Trace

with the new Refresh key one can

call for a new status, e.g. after

exposures

not supported, does not help for

troubleshooting

Select Unit
FU-mA

Program
> Read Focus Limits

Faultfind
> Logging Tables
> Read Actual Status
> Read Status Trace
> Read Error + detail screens

Faultfind
> Functional Tests
> test watchdog

Faultfind
> Monitoring
+ sub-functions

Faultfind
> Adaptation results
+ sub-functions

various paths

Program

FU mA Read Focus Limits

Faultfind

> FU mA
> Read Actual Status
> Read Status Trace

Faultfind

> FU mA
> Test Watchdog

Monitoring

> FU mA
+ sub-functions

Monitoring

> FU mA
Adaptation Results

Read Error + detail screens not

supported anymore, details must

be taken from the Error Log table

2 functions in one screen

Select Unit
FU-mA

Adjust
> IGBT Pulse Width Correction

agent-xrgscope-dictionay.doc Dec – 05 – 2003 page 3 - 4

various paths

Program

> FU kV IGBT Pulse Width
correction

XRGSCOPE AGenT comments

Faultfind
> Power On Results
> Read Configuration

Faultfind
> Logging Tables
> Read Trace

Faultfind
> Logging Tables
> Read Error
+ sub-functions

Faultfind
> Functional Tests
> Test Watchdog
> Test Converter
> Switch Error Handling

Faultfind
> Monitoring
> Measure Temperatures
> kV Measurements
> Converter Measurements

Fault Find

> FU kV
> Read Configuration

Fault Find

> FU kV
> Read Trace

Fault Find

> FU kV
> Test Watchdog
> Test Converter
> Switch Error Handling

Monitoring

> FU kV
> Measure Temperatures
> kV Measurements
> Converter Measurements

Read Error + detail screens not

supported anymore, details must

be taken from the Error Log table

Faultfind
> Monitoring
> Read 8 Bit Port
> Read 16 Bit Port

not supported anymore, does not

help for troubleshooting

> Read Memory

agent-xrgscope-dictionay.doc Dec – 05 – 2003 page 4 - 4