Philips MMS206 User Manual

A2.6.p65 1/31/01, 10:10 AM1

mounting as an option. The design of the satellites offers wall

To connect the center satellite speaker

9) C

ENTER OUT

satellite speakers To connect both surround left and right

8) S

URROUND OUT

URROUND IN cable for the

satellite speakers To connect both front left and right

7) F

RONT OUT

To connect the AC/AC adapter

OWER IN

6) P

subwoofer from the soundcard the center satellite speaker and

ENTER/ SUB. IN cable for

To connect the C

5) C

ENTER/SUB. IN (ORANGE COLOR)

RONT IN cable for the

surround speakers from the soundcard To connect the S

4) S

URROUND IN (BLACK COLOR)

front speakers from the soundcard To connect the F

3) F

RONT IN (GREEN COLOR)

To adjust the volume higher or lower

OTARY VOLUME CONTROL

2) R

On The red LED indicates that the power is To switch ON or OFF power

1) POWER ON/OFF

A 2.5/MMS205

~ EXPLANATION ~

For US/Canada only

IMPORTANT SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1. Read these instructions - All the safety and operating instructions should be read before the appliance is operated.

2. Keep these instructions - The safety and operating instructions should be retained for future reference.

3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions - All operating and use instructions should be followed.

5. Do not use this apparatus near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

6. Clean only with a damp cloth. The appliance should be cleaned only as recommended by the manufacturer.

7. Install in accordance with the manufacturers Instructions. Do not block any of the ventilation openings. For example, the appliance should not be

situated on a bed, sofa, rug, or similar surface or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

8. Do not Install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose

of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outler, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particulary at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

http://www.pcstuff.philips.com

Polarized Plug

EL 4562-E004: 99/3

Multimedia Speaker System

A 2.600 Compact Surround Power/

MMS206

The A 2.600 Compact Surround Power / MMS206 consists of 2 front satellite speakers, 2 surround satellite speakers, 1 center satellite speaker, a subwoofer and a remote control .To experience the excitement of 6 discrete audio channels, you can connect the system to any 5.1-channel soundcard, The system still can be connected to 4-channel soundcards that provide 3D decoded audio outputs for the enjoyment of surround sound. If your computer only has a stereo soundcard, the A 2.600 Compact Surround Power / MMS206 will operate as a stereo speaker system. The front and surround satellites on one side will be one stereo channel and the front and surround satellites on the other side will be the other stereo channel. It is also possible to drive the A 2.600 Compact Surround Power / MMS206 from a DVD player that has three analogue outputs.

4399 294 48571

Installation

Italiano:

1. Collegare il cavo LINE IN (verde)

2. Collegare il cavo S

3. Collegare il cavo C

4. Collegare le casse frontali (un connettore)

5. Collegare le casse surround (un connettore)

6. Collegare la cassa centrale

7. Collegare lalimentazione

8. Accendere/spegnere (O pulsante sul telecomando

9. Calibrare il sistema tramite la scheda audio / sorgente audio e i pulsanti del telecomando.

Nota: Non inserire il connettore di alimentazione nella presa

di rete in c.a. prima di avere completato tutti i collegamenti !

URROUND IN (nero) ENTER/ SUB. IN (arancione)

N / OFF) il sistema con lapposito

Polski:

1. Podùàcz przewód sygnaùu wejúciowego (Line in) (zielony).

2. Podùàcz przewód wejúcia sygnaùu Surround (czarny)

3. Podùàcz przewód wejúcia Center/Sub* (pomarañczowy)

4. Podùàcz gùoúniki przednie (pojedynczy wtyk)

5. Podùàcz gùoúniki tylne (surround) (pojedynczy wtyk)

6. Podùàcz gùoúniki centralny

7. Podùàcz zasilanie

8. Wùàcz/wyùàcz system uýywajàc przycisku wùàczania zasilania na pilocie zdalnego sterowania

9. Wyreguluj system uýywajàc organów sterowania karty

êwiæ

kowej/êródùa dêwiæku oraz pilota zdalnego

d sterowania

Uwaga: Nie wùàczaj wtyczki zasilania do gniazda sieciowego

przed dokonaniem wszystkich poùàczeñ!

Dansk:

1. Tilslut LINE IN kablet (grønt)

URROUND IN kablet (sort)

2. Tilslut S

3. Tilslut CENTER / SUB IN kablet (orange)

4. Tilslut front højttalerne (ét stik)

5. Tilslut surround højttalerne (ét stik)

6. Tilslut center højttaler

7. Tilslut strømforsyning

8. Tænd/sluk for anlægget med til/fra knappen på fjernbetjeningen

9. Indstil anlægget med lydkort/ lydkilde og betjeningselementerne på fjernbetjeningen

NB: Sæt ikke stikket i kontakten til elnettet før alt er

tilsluttet!

Nederlands:

1. Sluit de LINE IN kabel (groen) aan

2. Sluit de S

3. Sluit de C

4. Sluit de front-luidsprekers aan (één steker)

5. Sluit de surround-luidsprekers aan (één steker)

6. Sluit de center-luidspreker aan

7. Sluit het voedingsapparaat aan

8. Schakel het systeem in met de On/Off-toets op de

9. Stem het systeem af met de geluidskaart/ geluidsbron

Opmerking: Steek de stekker van het netsnoer pas in het

URROUND IN kabel (zwart) aan ENTER/ SUB. IN kabel (oranje) aan

afstandsbediening

en de bedieningselementen op de afstandsbediening

stopcontact als alle aansluitingen gereed zijn!

Norsk:

1. Kople til LINE IN-kabelen (grønn)

2. Kople til S

3. Kople til C

4. Kople til fronthøyttalerne (ett støpsel)

5. Kople til surround-høyttalerne (ett støpsel)

6. Kople til senterhøyttaleren

7. Slå på strømtilførselen

8. Slå systemet på med av/på-knappen på

9. Finjuster systemet ved hjelp av lydkortet/lydkilden og

Merk: Ikke sett støpselet i en stikkontakt før alle

URROUND IN-kabelen (svart) ENTER/SUB. IN-kabelen (oransje)

fjernkontrollen

tastene på fjernkontrollen

tilkoplingene er gjort!

English:

1. Connect the LINE IN cable (green)

2. Connect the S

3. Connect the C

4. Connect front speakers (one plug)

5. Connect surround speakers (one plug)

6. Connect the center speaker

7. Connect the power supply

8. Switch O the remote control

9. Tune the system using the soundcard/ sound source and the controls on the remote control

Note: Do not insert the power plug into the AC outlet until

URROUND IN cable (black) ENTER/ SUB. IN cable (orange)

N / OFF the system using the power button on

all connections are made!

Español:

1. Conecte el cable LINE IN (verde)

2. Conecte el cable S

3. Conecte el cable C

4. Conecte los altavoces frontales (un terminal)

5. Conecte los altavoces envolventes (un terminal)

6. Conecte el altavoz central

7. Conecte el cable de alimentación

8. Encienda y apague el sistema con el botón de encendido del mando a distancia

9. Optimice el funcionamiento del sistema con los controles de la tarjeta o la fuente de sonido y los botones del mando a distancia

Observación: No conecte el cable de alimentación a la

URROUND IN (negro)

ENTER/ SUB. IN (naranja)

toma de c.a. sin haber realizado antes todas las conexiones!

Svenska:

1. Anslut LINE IN-kabeln (grön)

URROUND IN-kabeln (svart)

2. Anslut S

ENTER/ SUB-kabeln (orange)

3. Anslut C

4. Anslut de främre högtalarna (en (1) kontakt)

5. Anslut surround-högtalarna (en (1) kontakt)

6. Anslut mitt-högtalaren

7. Anslut nätkontakten till nätuttaget

8. Slå PÅ/AV systemet med till-/frånknappen på fjärrkontrollen

9. Ställ in systemet med hjälp av ljudkortet / ljudkällan och knapparna på fjärrkontrollen.

Obs: Anslut inte nätkontakten till nätuttaget förrän alla

anslutningar har gjorts!

Türkçe:

1. LINE IN kablosunu (yeþil) takýnýz

URROUND IN kablosunu (siyah) takýnýz

2. S

ENTER/ SUB. IN kablosuýnu takýnýz (turuncu)

3. C

4. Ön hoparlörleri takýnýz (bir fiþ)

5. Surround hoparlörleri takýnýz (bir fiþ)

6. Merkez hoparlörleri takýnýz

7. Güç kaynaðýný takýnýz

8. Uzaktan kumanda üzerindeki açma-kapama düðmesini kullanarak sistemi açýnýz

9. Ses kartý / ses kaynaðý ve uzaktan kumada üzerindeki kontrolleri kullanarak sistemin sesini açýnýz

Note: Bütün baðlantýlarý yapmadan elektrik fiþini

AC çýkýþýna takmayýnýz!

Français :

1. Connectez le câble dentrée de ligne LINE IN (vert)

2. Connectez le câble dentrée S

3. Connectez le câble dentrée C

4. Connectez les haut-parleurs avant (une fiche)

5. Connectez les haut-parleurs surround (une fiche)

6. Connectez le haut-parleur central

7. Connectez lalimentation

8. Mettez le système sous/hors tension (O vous servant de la touche sur la télécommande

9. Procédez à laccord du système à laide de la carte son/ source audio et des commandes de la télécommande

Note: Nintroduisez pas la fiche dalimentation dans la prise

CA tant que tous les branchements ne sont pas effectués !

URROUND IN (noir)

ENTER/ SUB. IN (orange)

N / OFF) en

Deutsch:

1. Das LINE IN-Kabel (grün) anschließen.

URROUND IN-Kabel (schwarz) anschließen.

2. Das S

ENTER/ SUB. IN-Kabel (orange) anschließen.

3. Das C

4. Die Frontlautsprecher (ein Stecker) anschließen.

5. Die Surround-Lautsprecher (ein Stecker) anschließen.

6. Den Center-Lautsprecher anschließen.

7. Das Netzteil anschließen.

8. Das System mit der Netztaste O Fernbedienung einschalten.

9. Das System über die Soundkarte/Klangquelle und mit Hilfe der Bedienelemente auf der Fernbedienung einstellen.

Hinweis: Den Netzstecker nicht in die Steckdose stecken,

bis alle Verbindungen hergestellt worden sind!

N / OFF auf der

Suomi:

1. Kytke LINE IN -johto (vihreä).

URROUND IN -johto (musta)

2. Kytke S

ENTER/ SUB. IN -johto (oranssi).

3. Kytke C

4. Kytke etukaiuttimet (yksi pistoke).

5. Kytke surround-kaiuttimet (yksi pistoke).

6. Kytke keskikaiutin.

7. Yhdistä pistotulppa pistorasiaan.

8. Kytke/katkaise järjestelmän virta kauko-ohjaimen virtapainikkeella.

9. Viritä järjestelmä äänikortin/äänilähteen sekä kaukoohjaimen säätimien avulla.

Huom: Älä yhdistä pistotulppaa pistorasiaan, ennen kuin

kaikki kytkennät ovat valmiit!

Русский:

1. Подсоедините кабель L

2. Подсоедините кабель S

3. Подсоедините кабель C 4 . Подсоедините передние акустические колонки (один штекер).

5. Подсоедините акустические колонки звукового окружения (один штекер).

6. Подсоедините центральную акустическую колонку.

7. Подсоедините источник питания.

8. Включите систему, нажав кнопку включения питания на пульте дистанционного управления.

9. Настройте систему, используя звуковую карту, источник звука и управляющие кнопки на пульте дистанционного управления.

Примечание: Не подсоединяйте вилку сетевого шнура к

INE IN

(зеленый).

URROUND IN

(черный).

ENTER

/ SUB. IN (оранжевый).

розетке сети переменного тока не выполнены все? необходимы? соединения!

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

 Connect the blue wire to the terminal marked N or coloured black.  Connect the brown wire to the terminal marked L or coloured red.  Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

A2.6.p65 1/31/01, 10:10 AM2

Norge

Typeskilt finnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

Deutschland

Hiermit wird bescheinigt, daß dieses Gerät in Übereinstimmung mit den Bestimmungen der Amtsblattverfügung 1046/1984 funkentstört ist.

Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.