Philips MMS20517 User Manual
A2.5new.p65 1/31/01, 10:15 AM1
mounting as an option.
The design of the satellites offers wall
speaker
To connect the surround left satellite
9) S
URROUND OUT LEFT
speaker
To connect the surround right satellite
8) S
URROUND OUT RIGHT
UT 2 at the
UT 1 at the soundcard/
INE IN cable for the front
satellite speakers
To connect both front left and right
7) F
RONT OUT
To connect the AC/AC adapter
6) P
OWER IN
sound source
speakers from O
To connect the L
5) L
INE IN (GREEN COLOR)
soundcard/ sound force
surround speakers from O
URROUND IN cable for the
To connect the S
4) S
URROUND IN (BLACK COLOR)
or lower
To adjust the surround volume higher
3) ROTARY SURROUND VOLUME CONTROL
To adjust the volume higher or lower
2) R
OTARY VOLUME CONTROL
is On
The green LED indicates that the power
To switch ON or OFF power
1) POWER ON/OFF
A 2.5/MMS205
~ EXPLANATION ~
For US/Canada only
IMPORTANT SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.
1. Read these instructions - All the safety and operating
instructions should be read before the appliance is operated.
2. Keep these instructions - The safety and operating
instructions should be retained for future reference.
3. Heed all warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow all instructions - All operating and use instructions
should be followed.
5. Do not use this apparatus near water - for example,
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement or near a swimming pool, etc.
6. Clean only with a damp cloth. The appliance should be
cleaned only as recommended by the manufacturer.
7. Install in accordance with the manufacturers
Instructions. Do not block any of the ventilation
openings. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface or placed in
a built-in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
8. Do not Install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other. A
grounding type plug has two blades
and a third grounding prong. The wide
blade or the third prong are provided for your safety. When
the provided plug does not fit into your outler, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particulary at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/ apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
http://www.pcstuff.philips.com
AC
Polarized Plug
EL 4562-E004: 99/3
Multimedia Speaker System
A 2.500 Compact Surround Power
The A 2.500 Compact Surround Power consists of 4 satellites, a
subwoofer and a remote control .To experience the excitement of surround sound
from this speaker set, it is preferred to have sound cards which provide 3D decoded
audio outputs. If your computer only has a stereo soundcard, the A 2.500 Compact
Surround Power will operate as a stereo speaker system. The front and surround
satellites on one side will be one stereo channel and the front and surround satellites
on the other side will be the other stereo channel. It is also possible to drive the A
2.500 Compact Surround Power from a DVD player that has two analogue outputs.
4399 294 48731
Installation
Translate for the following languages:
Swedish, Finnish, Polish, Chinese, Turkish, Russian, Norwegian, Danish.
Italiano
1 Collegare il cavo Line In (verde) proveniente
dalluscita Out 1 della scheda audio
2 Collegare il cavo Surround In (nero) proveniente
dalluscita Out 2 della scheda audio (vale soltanto se
è disponibile una scheda audio a 4 canali)
3 Collegare le casse acustiche anteriori (una spina)
4 Collegare la cassa Surround destra
5 Collegare la cassa Surround sinistra
6 Collegare allalimentazione
7 Accendere il sistema con il pulsante di
alimentazione sul telecomando
8 Sintonizzare il sistema utilizzando la scheda audio/
sorgente audio e i comandi sul telecomando
Nota: Non inserire la spina di alimentazione nella presa di
corrente fino a che i collegamenti non sono stati tutti
ultimati!
Nederlands
1 Sluit de Line In-kabel (groen) op Out 1 van de
geluidskaart aan
2 Sluit de Surround In-kabel (zwart) op Out 2 van de
geluidskaart aan (dit geldt alleen voor een 4-kanaals
geluidskaart)
3 Sluit de front-luidsprekers aan (1 steker)
4 Sluit de rechter surround-luidspreker aan
5 Sluit de linker surround-luidspreker aan
6 Sluit het voedingsapparaat aan
7 Schakel het systeem in met de aan/uit-toets op de
afstandsbediening
8 Stel het systeem af met behulp van de geluidskaart /
geluidsbron en de toetsen op de afstandsbediening
Opmerking: Steek de netsteker pas in het stopcontact
als alle aansluitingen gedaan zijn!
English:
1. Connect the LINE IN cable (green) from OUT 1 at the
soundcard
2. Connect the S
the soundcard
3. Connect front speakers (one plug)
4. Connect surround right speaker
5. Connect surround left speaker
6. Connect the power supply
7. Switch on the system using the power button on the
remote control
8. Tune the system using the soundcard/ sound source
and the controls on the remote control
Note: Do not insert the power plug into the AC outlet
URROUND IN cable (black) from OUT 2 at
until all connections are made!
Español
1 Conecte el cable Line In (verde) desde la salida
Out 1 de la tarjeta de sonido
2 Conecte el cable Surround In (negro) desde la salida
Out 2 de la tarjeta de sonido (aplicable sólo si la
tarjeta de sonido es de 4 canales)
3 Conecte los altavoces frontales (un conector)
4 Conecte el altavoz envolvente derecho
5 Conecte el altavoz envolvente izquierdo
6 Conecte el suministro de alimentación
7 Encienda el sistema desde el mando a distancia
8 Afine el sistema ajustando la tarjeta o fuente de sonido
y los controles del mando a distancia
Observación: No inserte el conector de alimentación
en la toma de corriente mientras no haya
completado todas las conexiones
Svenska:
1. Anslut LINE IN-kabeln (grön) från OUT 1 på ljudkortet
URROUND IN-kabeln (svart) från OUT 2 på
2. Anslut S
ljudkortet
3. Anslut de främre högtalarna (en (1) kontakt)
4. Anslut högra surround-högtalaren
5. Anslut vänstra surround-högtalaren
6. Anslut nätkontakten till nätuttaget
7. Slå på systemet med till-/frånknappen på fjärrkontrollen
8. Ställ in systemet med hjälp av ljudkortet / ljudkällan och
knapparna på fjärrkontrollen.
Obs: Anslut inte nätkontakten till nätuttaget förrän alla
anslutningar har gjorts!
Français
1 Connectez le câble dentrée de ligne Line In (vert) de
Out 1 à la carte son
2 Connectez le câble Surround In (noir) de Out 2 à
la carte son (uniquement dans le cas où vous disposez
dune carte son à 4 voies)
3 Connectez les haut-parleurs avant (unefiche)
4 Connectez le haut-parleur Surround droit
5 Connectez le haut-parleur Surround gauche
6 Connectez lalimentation
7 Mettez lappareil sous tension au moyen du bouton
dalimentation sur la télécommande
8 Procédez à laccord en vous servant de la carte son/
source audio et des commandes sur la télécommande
Remarque : Nintroduisez pas la fiche dans la prise CA
tant que tous les branchements ne sont pas
effectués
Deutsch
1 Das Line In-Kabel (grün) an Ausgang Out 1d e r
Soundkarte anschließen.
2 Das Surround In-Kabel (schwarz) an
Ausgang Out 2 der Soundkarte anschließen.
(nur zutreffend bei einer vierkanaligen Soundkarte)
3 Die Frontlautsprecher anschließen (ein Stecker)
4 Den rechten Surround-Lautsprecher anschließen.
5 Den linken Surround-Lautsprecher anschließen.
6 Das Netzteil anschließen.
7 Das System mit Hilfe der Taste Power auf der
Fernbedienung einschalten.
8 Das System mit Hilfe der Soundkarte/Klangquelle und
der Bedienelemente auf der Fernbedienung einstellen.
Hinweis: Den Netzstecker nicht an eine Steckdose
anschließen, bevor alle Verbindungen
hergestellt worden sind.
Suomi:
1. Kytke äänikortin OUT 1 -liitännästä tuleva LINE IN -johto
(vihreä).
2. Kytke äänikortin O
-johto (musta).
3. Kytke etukaiuttimet (yksi pistoke).
4. Kytke oikeanpuoleinen surround-kaiutin.
5. Kytke vasemmanpuoleinen surround-kaiutin.
6. Yhdistä pistotulppa pistorasiaan.
7. Kytke järjestelmään virta kauko-ohjaimen
virtapainikkeella.
8. Viritä järjestelmä äänikortin/äänilähteen sekä kauko-
ohjaimen säätimien avulla.
Huom: Älä yhdistä pistotulppaa pistorasiaan, ennen kuin
kaikki kytkennät ovat valmiit!
UT 2 -liitännästä tuleva SURROUND IN
Polski:
1. Podùàcz przewód LINE IN (wejúcie sygnaùu) (zielony)
z gniazda OUT 1 na karcie dêwiekowæj
2. Podùàcz przewód S
z gniazda O
3. Podùàcz gùoúniki czoùowe (pojedynczy wtyk)
4. Podùàcz prawy gùoúniki otaczajàcy
5. Podùàcz lewy gùoúniki otaczajàcy
6. Podùàcz zasilanie sieciowe
7. Wùàcz system uýywajàc przycisku wùàczania zasilania
na pilocie zdalnego sterowania
8. Wyreguluj system uýywajàc organów sterowania karty
dêwiækowej/êródùa dêwiæku oraz pilota zdalnego
sterowania
Uwaga : Nie wùàczaj wtyczki zasilania do gniazda sieciowego
przed dokonaniem wszystkich poùàczeñ!
URROUND IN (gùoúniki otaczajàce)
UT 2 na karcie dêwiekowæj
Dansk:
1. Tilslut LINE IN kablet (grønt) fra OUT 1 på lydkortet
URROUND IN kablet (sort) fra OUT 2 på lydkortet
2. Tilslut S
3. Tilslut front højttalerne (ét stik)
4. Tilslut surround højre højttaler
5. Tilslut surround venstre højttaler
6. Tilslut strømforsyning
7. Tænd for anlægget med til/fra knappen på
fjernbetjeningen
8. Indstil anlægget med lydkort/lydkilde og
betjeningselementerne på fjernbetjeningen
NB: Sæt ikke stikket i kontakten til elnettet, før alt er tilsluttet!
1.
2.
3.
4.
5.
6.
7.
8.
Norsk:
1. Kople LINE IN-kabelen (grønn) til OUT 1 på lydkortet
2. Kople S
3. Kople til fronthøyttalerne (ett støpsel)
4. Kople til den høyre surround-høyttaleren
5. Kople til den venstre surround-høyttaleren
6. Kople til strømtilførselen
7. Slå på systemet med av/på-knappen på fjernkontrollen
8. Finjuster systemet ved hjelp av lydkortet/lydkilden og
Merk: Ikke sett støpselet i en stikkontakt før alle tilkoplingene
!
URROUND IN-kabelen (svart) til OUT 2 på lydkortet
tastene på fjernkontrollen
er gjort!
Türkçe:
1. LINE IN kablosunu (yeþil) ses kartý üzerindeki OUT 1
yuvasýna takýnýz
URROUND IN kablosunu (siyah) ses kartý üzerindeki
2. S
UT 2 yuvasýna takýnýz
O
3. Ön hoparlörleri takýnýz (bir fiþ)
4. Surround sað hoparlörü takýnýz
5. Surround sol hoparlörü takýnýz
6. Güç kaynaðýný takýnýz
7. Uzaktan kumanda üzerindeki açma-kapama düðmesini
kullanarak sistemi açýnýz
8. Ses kartý / ses kaynaðý ve uzaktan kumada üzerindeki
kontrolleri kullanarak sistemin sesini açýnýz
Not: Bütün baðlantýlarý yapmadan elektrik fiþini AC
çýkýþýna takmayýnýz!
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a
value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying
the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.
Русский:
1. Подсоедините кабель LINE IN (зеленый), идущий от
UT 1 звуковой карты.
выхода O
2 . Подсоедините кабель S
выхода OUT 2 звуковой карты.
3. Подсоедините передние акустические колонки (один
штекер).
4 . Подсоедините правую акустическую колонку звукового
окружения.
5. Подсоедините левую акустическую колонку звукового
окружения.
6. Подключите источник питания.
7. Включите систему, нажав кнопку включения питания на
пульте дистанционного управления.
8. Настройте систему, используя звуковую карту,
источник звука и управляющие кнопки на пульте
дистанционного управления.
Примечание: Не подсоединяйте вилку сетевого шнура
URROUND IN (черный), идущий от
к розетке сети переменного тока не
выполнены все? необходимы? соединения!
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den
innebygde netdelen er derfor ikke frakoplet nettet så
lenge apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal
apparatet ikke utsettes for regn eller fuktighet.
Deutschland
Hiermit wird bescheinigt, daß dieses Gerät in
Übereinstimmung mit den Bestimmungen der
Amtsblattverfügung 1046/1984 funkentstört ist.
Der Deutschen Bundespost wurde das
Inverkehrbringen dieses Gerätes angezeigt und die
Berechtigung zur Überprüfung der Serie auf Einhaltung
der Bestimmungen eingeräumt.
A2.5new.p65 1/31/01, 10:15 AM2
Loading...