Philips MCW770/22B, MCW770/22, MCW770, MCW770/37, MCW770/37B Quick Use Manual
1
English
Quick Use Guide MC W770
Open the battery compar tment of the remote control and insert
2 alkaline batteries, type AA (R06, UM-3).
1 Connect the speaker cables to the MC W770.
Use the supplied speakers only. Using other speakers
can damage the set or the sound quality will be
negatively affected.
2 Connect the AM/MW antenna.
3 Connect the FM antenna.
4 If you want to connect an additional appliance, use a cinch
cable to connect the audio inputs of the MC W770 to the
audio outputs of the additional appliance.
5 Check whether the mains voltage as shown on
the type plate corresponds to your local mains
voltage. If it does not, consult your dealer or
service organisation.
Make sure all connections have been made
before switching on the mains supply.
Connect the AC power cord supplied to
AC MAINS ~ and to the wall socket.
Supplied accessories
1 Insert batteries
2 Connect speakers, antennas, an additional appliance (optional)
and the AC power cord
– PC link software installer CD-ROM
– Wireless USB adapter and extension cable
– Remote control and 2 batteries, size AA
–2 loudspeaker boxes including
2 speaker cables
– AM/MW loop antenna
– FM wire antenna
– AC power cord
This Quick Use Guide gives a rough
overview and helps to start quickly with
basic steps. Please read the supplied
instruction manual for detailed
information.
2
3 Install the tuner
1 When the AC power cord is connected for the first time
to the wall socket, TUNER and AUTO INSTALL - PRESS
PLAY are displayed.
2 Press ÉÅ on the set to store all available radio stations
automatically.
➜ Automatic searching and storing starts. Once completed,
the last tuned radio station will be played.
4 Play your discs on the set
For playback on this set you can use:
– All pre-recorded audio CDs
– All finalised audio CDR and CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
VOL
AUX PC LINKTUNERCD
CD2
CD
3
CD5
CD4
CD1
ALBUM
BROWSE
VOL
1 Press OPEN/CLOSE / on the set.
2 Press one of the disc keys (DISC 1,
DISC 2, DISC 3, DISC 4, or DISC 5)
on the set to select the desired disc
tray to be opened.
3 Load a disc with the printed side up. 4 Press OPEN/CLOSE / again on the
set to close the tray.
5 If you want to play one
particular disc:
Press one of the disc keys CD 1,
CD 2, CD 3, CD 4, or CD 5 on the
remote control to start playback of
the desired disc in the selected tray.
If you want to play all loaded
discs:
Press CD on the remote control.
Then press ÉÅ to start playback.
00
To stop playback press STOP Ç.
AUX PC LINKTUNERCD
3
CD
1
CD2
CD4
CD
CD5
SHUFFLEPROGRAMREPEAT DISPLAY
TIMERCLOCKSLEEP TIMER ON/OFF
Loading...