Philips MCM108D User Manual

Micro Hi-Fi System

User manual

MCM108D

STANDBY-ON

SOURCE VOLUME

BAND

MICRO SYSTEM

PROG/CLOCK

MCM108D

TUNING

English Controls

Controls on the system and remote control

1 BAND

– for Tuner.......... (on the set only) selects waveband.

2 SOURCE (CD/ TUNER/ DOCK)

– switches on the system. – selects the respective sound source for CD/ FM/

MW/ DOCK.

3 STANDBY-ON / y

– switches the system to standby/on.

4 PROG/CLOCK

for CD .................programs tracks and reviews the

program.

for clock .............. sets the clock function.

5 OPEN•CLOSE

– opens/closes the CD door.

6 VOLUME

– adjusts volume level.

–

7 TUNING 0

– tunes to radio stations.

8 iR SENSOR

– infrared sensor for remote control.

9 n

– connect headphones.

0 ÉÅ

for CD .................starts or pauses CD playback.

! ¡1 / 2™

– skips to the beginning of a current track/

previous/ next track.

– fast searches back and forward within a track/

CD.

@ STOP 9

– stops CD playback or erase a CD program.

# DOCK

– selects sound source of DOCK

$ MUTE

– switches playback sound off and on.

% REPEAT

– repeats a track / disc / all programmed tracks.

^ SHUFF (SHUFFLE)

– plays CD/MP3 tracks in random order.

& SLEEP

– activates/deactivates or selects the sleeper time.

* TIMER

– activates/deactivates or sets the timer function.

( ALBUM 4 3

for MP3/WMA disc...........selects an album.

) DBB

– (Dynamic Bass Boost) enhances the bass.

¡ DSC

– (Digital Sound Control) selects sound

characteristics: JAZZ/POP/CLASSIC/ROCK.

MUTE

TUNER

DOCK

PROG

REPEAT

SHUFF

SLEEP TIMER

ALBUM

VOLUME

)

Notes for remote control: – First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD , TUNER). – Then select the desired function (for exampleÉ,

DBB DSC

(

General Information

IMPORTANT!

PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. FOR COUNTRIES THAT OPERATE AT 110V-127V, PLEASE ADJUST TO 110V-127V BEFORE YOU SWITCH ON THE SYSTEM.

Supplied accessories

–2 speaker boxes – MCM108D remote control with battery – MW loop antenna – Docking kit

- 1 Apple iPod dock and 1 Philips GoGear jukebox dock

- Dock adaptors (8 adaptors for different iPod types, and 4 adaptor s for different Philips GoGear types)

- 1 Docking cable

Environmental Information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Safety Information

● Before operating the system, check that the

operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer.

● Place the system on a flat, hard and stable

surface.

● The apparatus shall not be exposed to

dripping or splashing.

● Install the unit near the AC outlet and where the

AC power plug can be easily reached.

● Place the system in a location with adequate

ventilation to prevent internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side.

● The ventilation should not be impeded by

covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

● Do not expose the system, batteries or discs to

excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.

● No naked flame sources, such as lighted candles,

should be placed on the apparatus.

● No objects filled with liquids, such as vases, shall

be placed on the apparatus.

● If the system is brought directly from a cold to a

warm location, or is placed in a very damp room, moisture may condense on the lens of the disc unit inside the system. Should this occur, the CD player would not operate normally. Leave the power on for about one hour with no disc in the system until normal playback is possible.

● The mechanical par ts of the set contain self-

lubricating bearings and must not be oiled or lubricated.

● When the system is switched to Standby

mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

Preparations

Speaker

(right)

IMPORTANT! – Do not connect Mini-USB port both on the main unit and the supplied dock to a computer or any other USB devices. It is only for connecting the supplied dock and the main unit to let them work together. See the Dock section for dock connection.

Rear connections

The type plate is located at the rear of the system.

A Powe r

– Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.

WARNING! –For optimal performance, use only the original power cable. –Never make or change any connections with the power switched on.

FM wire antenna

MW loop antenna

Speaker

(left)

AC power cord

B Antennas Connection

AM (MW) antenna

1 Unfold the loop antenna and if necessary, use

screws (not supplied)to fix it to a flat, hard and stable place:

2 Fit the plug of the loop antenna to AM

ANTENNA as shown above.

3 Adjust the antenna for optimal reception

FM Antenna

It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit.

● Position the antenna as far as possible from a TV,

VCR or other radiation source.

Preparations

C Speakers Connection

Front Speakers

Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", the wire (marked red) to "+" and the wire (marked black) to "-".

● Fully inser t the stripped por tion of the speaker

wire into the terminal as shown.

Notes: –For optimal sound performance, use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminals. – Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Before using the remote control

1 Pull out the plastic protective sheet. 2 Select the source you wish to control by

pressing one of the source select keys on the remote control (for example CD, TUNER).

3 Then select the desired function (for example

É, í, ë).

Replacing battery (lithium CR2032) into the remote control

1 Pull out the knob A slightly to the left. 2 Pull out the battery compartment B .

3 Replace a new battery and fully insert the

battery compar tment back to the original position.

CAUTION! Batteries contain chemical substances, so they should be disposed off properly.

+ 12 hidden pages