Quick Start Guide
MC146
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick Start Guide
1
Remote Control
User manual
3
2
2
User Manual
Connection
1
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
2
FM wire antenna
speaker
(right)
1
AC power cord
Tip:
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
speaker
(left)
2
Setting the clock
1
In standby mode, press and hold CLOCK/DISPLAY on the
remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
2
3
Press CLOCK/DISPLAY to confirm.
➜ The clock digits for the hours flash.
4
Press TUNING 4 ¢ (à / á on the remote control)
to set the hours.
5
Press CLOCK/DISPLAY again.
➜ The clock digits for the minutes flash.
6
Press TUNING 4 ¢ (à / á on the remote control)
to set the minutes.
7
Press CLOCK/DISPLAY to confirm the time.
Playing a disc
1
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
2
Insert a disc with the printed side facing up and press down
3
on PULL TO OPEN to close the CD door.
4
PressÉÅto start playback.
5
Press 9 to stop playback.
Programming and tuning to radio stations
1
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
2
in order of waveband.
3
Press PRESET +/- until the desired preset station is displayed
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
© 2010 Koninklijke Philips Electronics N.V.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
– Then select the desired function ( 2;,
í, ë for example).
All rights reserved.
http://www.philips.com
MC146_05_QSG_V2.0
Loading...