Page 1
2
User manual
1
Quick Start Guide
Quick Start Guide
Setup
Step A
Enjoy
Step B
MC145
What’s in the Box?
You should find these items upon opening the box.
Remote Control
Pull out the insulation
plastic sheet.
Quick Start Guide
User manual
Page 2
Setup
Connection
1 Connect the speaker wires to the SPEAKERS terminals.
2 After ensuring all the above connections have been made, connect
the power cord of the system to the AC power outlet.
FM antenna
Speaker
(right)
1
FM ANT
2
AC ~
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Speaker
(left)
110V
220V
AC power cord
Setting the clock
1 In standby mode, press DISPLAY/CLOCK button..
The clock digits for the hours flash.
2 Press ¡1 / 2™ to set the hours.
3 Press DISPLAY/CLOCK again. The clock digits for the minutes flash.
4 Press ¡1 / 2™ to set the minutes.
5 Press DISPLAY/CLOCK to confirm the time.
Page 3
Step B
Enjoy
Playing a disc
1 Select CD source.
2 Press OPEN•CLOSE on the top of the system to open the CD door.
3 Inser t a disc with printed side facing up and press down
on OPEN•CLOSE to close the CD door.
4 Press 2; to start playback.
5 Press 9 to stop playback.
Auto programming radio stations
1 Press SOURCE (TUNER on the remote control) to select tuner source.
2 Press STOP/BAND (on the set) or TUNER (on the remote control)
once or more to select your waveband.
3 Press PRESET G / H (3 / 4 on remote control) to select the preset
number where programming should start.
4 Press PROG for more than 2 seconds to activate programming.
Tip
Detailed playback features and additional
functions are described in the accompany
user's manual.
Loading...