Philips MBD3000 12 User Manual

Register your product and get support at
www.philips.com/welcome
MBD3000
EN User manual
Contents
1 Important 4
Safety and important notice 4 Trademark notice 5
2 Your Blu-ray Micro System 6
Feature highlights 6 Playable media 7 Product overview 8
3 Connect 11
Preparations 11 Connect speakers 11 Connect video/audio cables 12 Route audio to other devices 13 Connect FM antenna 15 Connect a USB device 15 Connect a network 15 Connect power 15
4 Get started 16
Prepare the remote control 16 Set clock 17 Find the TV input 17 Use the Home menu 17 Navigate a menu 17 Select a menu display language 17 Set up a network 18 Use Philips EasyLink 19
6 Adjust settings 26
7 Tune to FM radio stations 32
Program radio stations automatically 32 Program radio stations manually 33 Tune to a preset radio station 33 Set RDS clock 33
8 Adjust volume level and
sound effect 34
Adjust volume level 34 Select a sound effect 34 Mute sound 34 Listen through headphone 34
9 Additional Information 35
Adjust brightness of display panel 35 Set the alarm timer 35 Set the sleep timer 35 Update software 35 Care 36 Specifications 36
English
5 Play 20
Play a disc 20 Play from a USB device 20 Play video 21 Play photo 24 Play music 25
10 Troubleshooting 38
11 Glossary 40
EN
3
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure cur tains or other objects never cover the ventilation slots on the product. Never place the product, remote control or
batteries near naked flames or other heat sources, including direct sunlight. Only use this produc t indoors. Keep this
product away from water, moisture and liquid­filled objects. Never place this product on other electrical
equipment. Keep away from this product during lightning
storms. Where the mains plug or an appliance
coupler is used as the disconnect device, the disconnect device shall remain readily operable. Visible and invisible laser radiation when open.
Avoid exposure to beam.
This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC).
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can • impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your • hearing ‘comfor t level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your
4
EN
volume to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting. • Slowly increase the sound until you can • hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even • at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment • reasonably and take appropriate breaks.
Be sure to observe the following guidelines when using your headphones.
Listen at reasonable volumes for • reasonable periods of time. Be careful not to adjust the volume as • your hearing adapts. Do not turn up the volume so high that • you can’t hear what’s around you. You should use caution or temporarily • discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.
Copyright notice
This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact open.source@philips.com. If you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email address, please write to “Open Source Team, Philips Intellectual Property & Standards, P.O. Box 220, 5600 AE Eindhoven, The Netherlands.” If you do not receive timely confirmation of your letter, please email to the email address above.
Trademark notice
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are trademarks.
HDMI, and HDMI logo and High-Definition Multimedia Inter face are trademarks or registered trademarks of HDMI licensing LLC.
‘AVCHD’ and ‘AVCHD’ logo are trademarks of Matsushita Electric Industrial Co., Ltd and Sony Corporation.
English
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual proper ty rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Open source software
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses.
‘x.v.Colour’ is a trademark of Sony Corporation.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of Blu-ray Disc Association.
EN
5
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
2 Your Blu-ray
Micro System
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this product. The model number and serial number are on the bottom of this product. Write the numbers here: Model No. __________________________ Serial No. ___________________________
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www. divx.com for more information and software tools to conver t your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
®
DivX
, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license.
Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.
®
device must be registered in
Feature highlights
For optimal per formance of this product, it is recommended to regularly update the software of this product.
High-Definition entertainment
Watch high-definition content disc with HDTV (High Definition Television). Connect it through a high speed HDMI cable (1.3 or category 2). You can enjoy excellent picture quality up to 1080p resolution with the frame rate of 24 frames per second with progressive scan output.
BD-Live
Connect this player to the movie studios website via the LAN port or external Wi-Fi to access a variety of up-to-date content (e.g. refreshed previews and exclusive special features).
6
EN
Playable media
This product can play:
BD-Video, BD-R/RE2.0• DVD, DVD-Video, DVD+R/+RW, DVD-• R/-RW, DVD+R/-R DL (Dual Layer) Video CD/SVCD• Audio CD, CD-R/CD-RW, MP3 media, • WMA media, JPEG files DivX (Ultra)/DivX Plus HD media• USB flash drive
Region codes
You can play discs with the following region codes.
Region code Countries DVD Blu-ray
Europe, United Kingdom
B
English
EN
7
Product overview
k
h
i
Main unit
a
b
c d
e f g
m l
j
a Disc compartment b STANDBY-ON
Turn on this product or switch to the • Eco Power standby mode.
c SRC
Select a source.
d
/
Skip to the previous/next track.• Skip to the previous/next title or • chapter. Tune to a radio station.
e
Star t or pause play.
f
Stop play.• Erase a program.
g
Connect to a USB flash drive.
h
Headphone socket.
i MP3 LINK
Connect to an external audio device.
j VOLUME
Adjust volume.• Adjust time.
k IR sensor
Detect signals from the remote • control. Always point the remote control at the IR sensor.
l
Open or close the disc • compartment.
m Display panel
8
EN
Remote control
  
 
 
 
 
 
 
 
  
a
Turn on this product or switch to the • Eco Power standby mode. When EasyLink is enabled, press • and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby.
b OPEN/CLOSE
Open or close the disc • compartment.
c RADIO
Switch to FM radio.
d DISC/TOP MENU
Switch to the disc source.
BD: Display the top menu.
DVD: Display the title menu.
e Color buttons
BD: Select tasks or options.
f
Access the home menu of this • product.
g DISC/POP-UP/MENU
BD: Access or exit the pop-up menu.
DVD: Access or exit the disc menu.
h OK
Confirm an entry or selection.
i
Navigate through the menus.
: Search forward or backward for
a radio station.
j
k
l
m
: Tune to a radio station.
BACK
Return to a previous display menu.
Star t or resume play.
/
Search backward or forward.
/
Skip to the previous or next title, • chapter, or track.
English
EN
9
n
Mute or restore volume.
o VOL +/-
Adjust volume.• Adjust time.
p Alphanumeric buttons
Select an item to play.• Enter numbers/letters/text.
q PROGRAM/CLOCK
Program radio stations.• Set the clock.• Display the set clock (unavailable in • the tuner mode).
r BONUSVIEW
Turn on or off the secondary video • in a small screen window during play (applicable only to a Blu-ray disc that supports the BONUSVIEW or Picture-In-Picture feature).
s LOUDNESS
Turn on or off automatic loudness • adjustment.
t MODE/DIM
Select repeat play modes.• Select shuffle play modes.• Select a brightness level for the • display panel on the main unit.
u HDMI
Select the video resolution of HDMI • output.
v SLEEP/TIMER
Set the sleep timer.• Set the alarm timer.
w SUBTITLE
Select a subtitle language on a disc.
x BASS
Adjust bass level.
y TREBLE
Adjust treble level.
z AUDIO
Select an audio language or channel • on a disc.
{
Stop play.• Move the paused picture one step • forward.
|
Pause play.
}
INFO
Display the current status or the disc • information. Display the ID3 information (if • available) of MP3 tracks.
~
OPTIONS
Access options for the current • activity or selection.
USB
Switch to the USB input source.
AUX/MP3 LINK
Switch to the AUX/MP3 Link input • source.
10
EN
3 Connect
Make the following connections to use this product.
Preparations
Place the apparatus near to the T V.
1 2 Place the front left and right speakers
at equal distance from the T V and at an angle of approximately 45 degrees from the listening position.
Analog stereo system• FM antenna• USB flash drive• Wired/Wireless network
Note
Refer to the type plate at the back or bottom of the product for identification and supply ratings. Before you make or change any connections,
ensure that all the devices are disconnected from the power outlet.
Connect speakers
English
Note
To avoid magnetic interference or unwanted noise, never place this appar atus and speakers too close to any radiation devices.
Basic connections:
Speakers• Video• Audio• Power
Optional connections:
Route audio to other devices
HDMI-compliant AV receiver/• amplifier Multi-channel AV amplifier/receiver• Digital AV amplifier/receiver
Note
Insert the stripped por tion of each speaker wire into the socket completely. For optimal sound, use the supplied speakers
only. Connect only speakers with impedance that is
the same or higher than the supplied speakers.
For the main unit side:
1 Match the type and colors of the speaker
cable connectors to the speaker input sockets on the back of the main unit.
2 Connect the speaker cables.
V DI
E
O
ANTENNA
O
U
T
LAN
DIGITAL AV OUT
Pr/Cr
Pb/Cb
~
AC
FM
COAXIAL
LR
AUX
OPTICAL
Y
DIGITAL AUDIO OUT
Wi-Fi
COMPONENT
IN
LINE OUT
LR
L
R
SPEAKER OUT
EN
11
For the speaker side:
b
1 Unscrew the speaker connectors. 2 For the left speaker, identify the speaker
cable that is connected to the left connectors on the main unit.
Option 1: Connect to the HDMI jack
LAN
DIGITAL AV OUT
~
AC
3 Inser t fully the red end of the speaker
cable into the red (+) connector.
HDMI
4 Screw the red (+) connector to secure
the cable.
5 Inser t fully the silver end of the speaker
cable into the black (-) connector.
6 Screw the black (-) connector to secure
the cable.
7 Repeat steps 2-6 for the right speaker.
ac
Connect video/audio cables
Select the best video connection that the TV can support.
Option 1: Connect to the HDMI jack (for an HDMI, DVI or HDCP-compliant TV ).
Option 2: Connect to the component video jacks (for a standard TV or Progressive Scan TV).
Option 3: Connect to the composite video jack (for a standard TV).
1 Connect an HDMI cable (not supplied)
to:
the HDMI jack on this product. the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via an HDMI/DVI adaptor. Connect an audio cable for sound output. You can optimize the video output. Press the
HDMI button repeatedly to select the best resolution the TV can suppor t. If this product connects to a TV compatible
with 1080p or 1080p/24Hz, Philips recommends HDMI category 2 cable, also known as High Speed HDMI cable, for optimal video and audio output. To play the digital video images of a BD-video
or DVD-video via an HDMI connection, it is necessary that both this product and the display device (or an AV receiver/amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). This type of connection provides best picture
quality.
OEDIV
ANTENNA
UO T
Pr/Cr
Y
Pb/Cb
COMPONENT
FM
COAXIAL
LR
AUX
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
LR
L
R
SPEAKER OUT
HDMI IN
12
EN
Option 2: Connect to the component video jacks
Option 3: Connect to the composite video jack
PbY
Pr
Pr/Cr
Pb/Cb
Y
COMPONENT
V
I
D
OE
O
LAN
DIGITAL AV OUT
Pr/Cr
Y
Pb/Cb
COMPONENT
ANTENNA
U
T
FM
COAXIAL
AUX
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
L
R
SPEAKER OUT
AUDIO IN
LR
LR
1 Connect the component video cables
(not supplied) to:
the Y Pb/Cb Pr/Cr jacks on this product. the COMPONENT VIDEO input • jacks on the TV.
2 Connect the audio cables to:
the LINE OUT/AUDIO -L/R jacks on this product. the AUDIO input jacks on the TV.
AUDIO IN
VIDEO IN
VIDEO OUT
LINE OUT
V
I
D
E
O
ANTENNA
O U
T
LAN
DIGITAL AV OUT
Pr/Cr
Y
Pb/Cb
COMPONENT
FM
COAXIAL
LR
AUX
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
LR
L
R
SPEAKER OUT
1 Connect a composite video cable to:
the VIDEO jack on this product. the VIDEO input jack on the TV.
2 Connect the audio cables to:
the LINE OUT/AUDIO -L/R jacks on this product. the AUDIO input jacks on the TV.
Tip
The video input jack on the T V might be labeled as A /V IN, VIDEO IN, COMPOSITE or BASEBAND.
English
Tip
The component video input jack on the TV might be labeled as Y Pb Pr or YUV.
Route audio to other devices
You can route the audio from this product to other devices.
EN
13
Connect to an HDMI-compliant AV receiver/amplifier
V
HDMI
OEDI
LAN
TUO
DIGITAL AV OUT
Pr/Cr
Y
Pb/Cb
COMPONENT
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
HDMI IN
ANTENNA
FM
LR
AUX IN
LINE OUT
LR
L
R
SPEAKER OUT
1 Connect an HDMI cable (not supplied) to:
the HDMI jack on this player. the HDMI jack input jack on the • device.
Connect to optical jack
OEDIV
ANTENNA
TUO
LAN
DIGITAL AV OUT
OPTICAL
Pr/Cr
Y
Pb/Cb
COMPONENT
FM
COAXIAL
LR
AUX
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
LR
L
R
SPEAKER OUT
OPTICAL
1 Connect an optical cable (not supplied)
to:
the OPTICAL jack on this product. the OPTICAL/DIGITAL input jack on • the device.
Tip
The HDMI connection provides best audio quality.
Connect to a digital AV amplifier/receiver
Connect to coaxial jack
COAXIAL
COAXIAL
V
I
D
E
O
ANTENNA
O
U
T
LAN
DIGITAL AV OUT
Pr/Cr
Pb/Cb COMPONENT
FM
COAXIAL
LR
AUX
OPTICAL
Y
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
LR
L
R
SPEAKER OUT
1 Connect a coaxial cable (not supplied) to:
the COAXIAL jack on this product. the COAXIAL /DIGITAL input jack • on the device.
Connect an analogue stereo system
AUDIO IN
V
I
D
E
O TUO
LAN
DIGITAL AV OUT
LINE OUT
Pr/Cr
Y
Pb/Cb
COMPONENT
ANTENNA
FM
COAXIAL
LR
AUX
OPTICAL
DIGITAL AUDIO OUT
Wi-Fi
IN
LINE OUT
LR
L
R
SPEAKER OUT
1 Connect the audio cables to:
the LINE OUT/AUDIO -L/R jacks on this product.
the AUDIO input jacks on the • device.
14
EN
Loading...
+ 28 hidden pages