Light-line systems
Philips indoor luminairesLight-line systems8.2
Selection guide – Light-line systems
Luminaire family Page Lamps Reflectors Wiring
Fluorescent
TL5
TL-D Steel Aluminum 5-wire
mm
2
7-wire
mm
2
9-wire
mm
2
Maxos
8.4
• • • • • •
TTX400
8.32
• • • • • • •
Tetrix TTX150
8.64
• • • • •
Philips indoor luminaires Light-line systems 8.3
Light-line systems
Selection guide – Light-line systems
Luminaire family Wiring Protection Emergency
lighting
Lighting
control
Dynamic lighting option
(color mixing)
2x5 wire
mm
2
2x7 wire
mm
2
Bus bar
(flexible
positioning)
IP class
Maxos
• • •
IP64
IP63
IP40
IP20
• • •
TTX400
IP20
• •
Tetrix TTX150
IP20
•
Philips indoor luminaires8.4 Light-line systems
Maxos
Philips indoor luminaires 8.5
Light-line systems
Light-line systems
Maxos – the multifunctional
performer, in proper style
Maxos has been designed on the basis of in-depth knowledge of end-user needs
in the retail business and industry. It also offers solutions for schools, ofces and
public spaces. Maxos’ durable quality and electrical exibility, combined with a
wide selection of reectors and accessories, ensure well-designed, cost-effective
lighting solutions with minimum energy consumption.
Maxos is designed for fast installation and is available in TL-D and TL5 versions, in the colors
silver and white, and with IP20 and IP64 protection. The possibility of integrating projectors and
the exibility in positioning electrical units make it the ideal system for retail outlets.
www.philips.com/lighting
Aluminum reector TL-D, perforatedAluminum reector TL5 Trapeze reectorFacetted reector with D6-louver
Philips indoor luminaires8.6
Maxos
Light-line systems
Main applications
1 Retail
Combining attractive design and compact dimensions with outstanding light output and
distribution, Maxos is ideally suited to retail applications – e.g. food, non-food and fashion
stores. The combination of TL5 lamps and aluminum reectors, for example, delivers exactly
the right amount of light precisely where it is needed. Maxos also offers extensive options to
integrate projectors/spots, as well as exibility in positioning of electrical units and spots (bus
bar system). The light-line system is available in both silver and white, ensuring a perfect match
with the store interior.
1 2
Philips indoor luminaires 8.7
Maxos
Light-line systems
Light-line systems
2 Industry
The Maxos light-line system helps to boost operating efciency and safety in industrial
facilities by delivering high lighting levels with low glare, while at the same time reducing
energy consumption and maintenance. Dedicated TL-D aluminum reectors are available
for each application. Maxos has IP64 protection options across the system. A dedicated IP63
reector unit – the outside of which can be cleaned – has been developed for the automotive
and food industries. Maxos is also available in versions with up to 14 wires; this allows, among
other things, zones for separate switching and emergency lighting with cabling separated from
the standard mains.
3Ofces
In ofce environments, the Maxos light-line system delivers high lighting levels, combined with
low glare, for example by means of TL5 lamps in combination with OLC semi-high-gloss high-
quality aluminum optics with 3D lamellae (D6). This creates a bright, stimulating ambience that
minimizes visual fatigue and improves productivity.
4 Public spaces
Maxos’ appealing design aesthetic and system exibility makes it eminently suited to a host of
applications in public spaces.
3 4
Philips indoor luminaires8.8
Maxos
Light-line systems
Suspension brackets in
silver and white
Trunkings in
silver and white
Electrical units in
silver and white
Maxos TL5
Maxos bus bar system for TL5 and TL-D
4MX656
5-wire 1.5 mm
2
7-wire 1.5 mm
2
5-wire 2.5 mm
2
7-wire 2.5 mm
2
4MX056...BB
(bus bar)
Bus bar/5-wire 2.5 mm
2
Bus bar/7-wire 2.5 mm
2
4MX691
1-lamp TL5
2-lamp TL5
1-lamp TL5 EL
2-lamp TL5 EL
4MX691...BB
4MX091...BB
(bus bar)
Bus bar/1-lamp/TL5
Bus bar/2-lamp/TL5
Bus bar/1-lamp/TL-D
Bus bar/2-lamp/TL-D
Reectorsand
mirror inlays
4MX692...F 4MX692...D/C
Facetted reector
- slotted
- standard
Aluminum reector
- narrow beam
- wide beam
- medium beam
- ‘double asymmetrical beam
- asymmetrical beam
- very narrow beam
4MX692...T
Trapeze reector
- without mirror
- with medium-beam mirror
- with narrow-beam mirror
- perforated without mirror
- slotted without mirror
Louvers and optics
4MX693...D6 4MX693...M2
Semi-high-gloss optic
- wide-beam optic
- narrow-beam optic
White louver
Prismatic optic
Aluminum proled louver
4MX693...L
White louver
4MX656...2x
(double wiring)
2x5-wire 2.5 mm
2
2x7-wire 2.5 mm
2
Projector connection
Electrical units with 3C track
and bus bar adapter units
Philips indoor luminaires 8.9
Maxos
Light-line systems
Light-line systems
9MX056
Maxos TL-D / IP20 / IP40
SDW-T /
CDM-T units
Maxos TL-D IP64
4MX056...IP64
White only
7-wire 1.5 mm
2
5-wire 2.5 mm
2
7-wire 2.5 mm
2
4MX056
4MX056...2x
(double wiring)
5-wire 1.5 mm
2
7-wire 1.5 mm
2
5-wire 2.5 mm
2
7-wire 2.5 mm
2
2x5-wire 1.5 mm
2
2x7-wire 1.5 mm
2
2x5-wire 2.5 mm
2
2x7-wire 2.5 mm
2
4MX056 A.../M...E...
Extended trunkings
5-wire 1.5 mm
2
/300 mm
600 mm
4MX091
1-lamp TL-D
2-lamp TL-D
1-lamp TL-D EL
2-lamp TL-D EL
2-lamp TL-D FSG32 mm
4MX013 4MX014...IP63
White only
1-lamp TL-D
2-lamp TL-D
1-lamp TL5
2-lamp TL5
4MX091...IP64
1-lamp TL-D
2-lamp TL-D
1-lamp TL-D EL
2-lamp TL-D EL
1-lamp TL-D FF-sign
2-lamp TL-D FF-sign
4MX092...IP64
Trapeze reector
4MX092...T
4MX092...F
Trapeze reector
- without mirror
- with wide-beam mirror
- with narrow-beam mirror
- ‘wall washer’
- perforated without mirror
- slotted without mirror
4MX092...D/C/Wing
Aluminum reector
- narrow beam
- wide beam
- asymmetrical beam
- very narrow beam
- wide beam / perforated
Wing optic reector/indirect
4MX093...L
4MX093...
L/PL/C6/D6
White louver
Silver louver
White louver
Prismatic optic
Semi-high-gloss optic
- wide-beam optic
- narrow-beam optic
4MX014...IP63
Projector connection
Electrical units with 3C track
Facetted reector
- without mirror
- with wide-beam mirror
- with asymmetrical beam
mirror
- slotted without mirror
CDM-T lamp
SDW-T lamp
Includes facetted reector
Philips indoor luminaires8.10
Maxos
Light-line systems
A variety of suspension brackets can
be clicked into place along the trunking
groove.
Fast and smooth
installation
Maxos can be quickly and easily set up by
installers of all ability levels, thanks to its clearly
denable components and simple click together
assembly.
The two trunkings are connected via
a sturdy coupler. Then the prewired
5- or 7-pole electrical connections
can be manually connected.
The gear units are secured in the
trunking via a two-way turnable clip,
simply click them into place. The locks
are made of steel.
Reectors are tted onto the same
mounting points as the gear units.
Louvers and optics can be easily put in
place, enabling easy relamping.
Philips indoor luminaires 8.11
Maxos
Light-line systems
Light-line systems
Resolutie te laag
Philips indoor luminaires8.12 Light-line systems
Maxosaluminumreectorsandoptics
The aluminum reectors for TL5 and TL-D lamps are optimized
for applications in supermarkets, shops, distribution centers and
industry. They are made of high-quality aluminum and are available for
electrical units holding 1 or 2 TL5 or TL-D lamps. A semi-high-gloss
(D) aluminum reector is available for wide-beam, medium-beam,
narrow-beam, asymmetrical beam and (double-) asymmetrical-beam
light distributions. For very narrow beams a high-gloss (C) aluminum
reector is available. For TL-D, a perforated decorative high-gloss
aluminum reector in wide beam can be ordered.
TL5 aluminum reectors can be equipped with aluminum louvers with
proled lamellae (M2) or with a simple white steel louver (L) for glare
reduction.
All the reectors are xed to the electrical unit via a simple click. They
can be connected to each other in a line by means of an overlap; for
the TL5 versions, additional coupling pieces (9MX056 CP/TL5) are
available as an option. Also for the TL5 versions, decorative end-plates
for the beginning and end of the light-line are available as accessories.
Maxos
Maxos TL5
Aluminum reectors and optics
Type 4MX692 (TL5 reector)
4MX693 (TL5 louver/optic)
Suitable electrical unit For 1 and 2 TL5 35, 49, 54 and 80 W versions
Material and light
distribution
Reector:
Semi-high gloss aluminum (D), narrow beam
(-NB)
Semi-high gloss aluminum (D), medium beam
(-MB)
Semi-high gloss aluminum (D), wide beam
(-WB)
Semi-high gloss aluminum (D), asymmetric beam
(-A)
Semi-high gloss aluminum (D), double
asymmetric beam (-DA)
High gloss aluminum (C), very narrow beam
(-NB)
Louver:
Aluminum with proled lamelae (M2)
Steel, white coated (L-D WH)
Accessory Aluminum reector end caps (9MX056 EP/TL5 SI
/ WH)*, coupling pieces (9MX056 CP/TL5) *not
for C-NB reector
Remarks Optics and louvers are suitable for 1- and 2 lamp
versions
Main applications Retail (e.g. food, fashion)
Maxos TL-D
Aluminum reectors
Type 4MX092
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions
Material and light
distribution
Semi-high gloss aluminum (D), narrow beam (-NB),
1- and 2-lamp
Semi-high gloss aluminum (D), wide beam (-WB),
1- and 2-lamp
Semi-high gloss aluminum (D), asymmetrical beam
(-A), 1- and 2-lamp
High gloss aluminum (C), very narrow beam (-NB),
1-lamp
High gloss aluminum, perforated (CP), wide beam
(-WB), 1-lamp
Remarks *2-lamp versions of aluminum reectors to
be used with dedicated electrical unit (with
lampholder F32 mm)
Main applications Industry, logistics, retail
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.13
Light-line systems
Light-line systems
Maxos 4MX692 TL5 aluminum
reector with semi-high-gloss mirror,
available for narrow-, medium-,
wide-beam, asymmetrical and double
asymmetrical light distribution (D-NB/
D-MB/D-WB/D-A/D-DA)
Maxos 4MX692 TL5 aluminum
reector with high-gloss mirror for
very narrow-beam light distribution
Maxos 4MX692 TL5 aluminum
reector for narrow, medium, wide,
asymmetrical or double-asymmetrical-
beam light distribution, with aluminum
optic with proled lamellae (4MX693
M2) or white lamellae louver (4MX693
L-D)
Maxos 4MX092 TL-D aluminum
reector for 1-lamp electrical unit with
a semi-high-gloss mirror for narrow or
wide-beam light distribution (D-NB/D-
WB) or a high-gloss mirror for narrow-
beam light distribution (C-NB)
Maxos 4MX092 TL-D perforated
aluminum reector for wide-beam light
distribution and upward lighting
Maxos 4MX092 TL-D aluminum
reector for 2-lamps electrical units
with 32 mm lamp holder (F32)
Maxos
TL5 TL-D
Philips indoor luminaires8.14
Maxos
Light-line systems
Maxosfacettedreectorsandoptics
Facetted reectors for TL5 and TL-D give shops and ofces a high-
class appearance.
They are made of steel, with a white or silver coating, and are available
for electrical units holding 1 or 2 TL5 or TL-D lamps.
The facetted reector can be integrated with a semi-high-gloss (D6)
OLC optic of high-quality aluminum. This optic has parabolic side
reectors and parabolic lamellae, and it can create either a medium
beam (with an integrated white top reector) or a narrow beam (with
an integrated mirror top reector). Moreover, a prismatic acrylic cover
(P) and a white steel louver (L-F) are also available.
End-plates for the beginning and end of the light-line are available as
accessories.
Maxos TL5
Facetted reectors and optics
Type 4MX692 (TL5 reector)
4MX693 (TL5 louver/optic)
Suitable electrical unit For 1 and 2 TL5 35, 49, 54 and 80 W versions
Material and light
distribution
Reector:
Steel, facetted (F) in white (WH) or silver (SI)
Reector option:
Steel, facetted (F) with high-gloss aluminum
mirror, wide beam (-WB)
Steel, facetted (F) with high-gloss aluminum
mirror, asymmetrical beam (-A)
Optic:
Semi-high gloss, high-quality aluminum, (D6),
wide beam (-WB)
Semi-high gloss, high-quality aluminum, (D6),
narrow beam (-NB)
Cover:
PMMA prismatic cover (P)
Louver:
Steel lamellae, white (L-F WH)
Installation Click-in xation on electrical unit
Accessory Facetted reector end caps (9MX056 EP-F WH/
SI), facetted reector coupling pieces (9MX056
CP-F WH/SI)
Remarks Reectors and optics are suitable for 1- and 2
lamp versions
Main applications Ofces, schools, cash areas in shops
Maxos TL-D
Facetted reectors and optics
Type 4MX092 (TL-D reector)
4MX093 (TL-D louver/optic)
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions
Material and light
distribution
Reector:
Steel, facetted (F)
Steel, facetted (F) with high gloss aluminum
mirror, wide beam (-WB)
Steel, facetted (F), with high gloss aluminum
mirror, asymmetrical beam (-A)
Reector option:
Steel, facetted (F) with symmetrical beam, direct/
indirect (F-S-D/I)
Louver:
Semi-high gloss, high-quality aluminum, (D6),
wide beam (-WB)
Semi-high gloss, high-quality aluminum, (D6),
narrow beam (-NB)
PMMA prismatic cover (P)
Steel lamellae, white (L-F WH)
Installation Click-in xation on electrical unit
Accessory Facetted reector end caps (9MX056 EP-F WH/
SI), facetted reector coupling pieces (9MX056
CP-F WH/SI)
Remarks *2-lamp versions of facetted reectors to be used
with dedicated electrical unit (with lampholder
F32 mm)
Reectors and optics are suitable for 1- and 2-
lamp versions
Main applications Ofces, schools, cash areas in shops
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.15
Maxos
Light-line systems
Light-line systems
TL5 TL-D
Maxos 4MX692 TL5 facetted reector,
also for wide or asymmetric-beam light
distribution (F/F-WB/F-A)
Maxos 4MX692 TL5 slotted facetted
reector with direct/indirect light
distribution (F-S-D/I); a version for
emergency lighting is also available
(F-S-D/I-EL)
Maxos 4MX692 TL5 aluminum
reector with semi-high-gloss mirror
for narrow, medium, wide, asymmetrical
or double-asymmetrical-beam light
distribution, with lamellae louver for
facetted reector (4MX693 L-F)
Maxos 4MX692 TL5 facetted reector,
for wide or asymmetric-beam light
distribution with OLC semi-high-gloss
high-quality aluminum optic with 3D
lamellae (4MX693 D6)
Maxos 4MX692 TL5 facetted reector
with prismatic refractor (4MX693 P)
Maxos 4MX092 TL-D facetted
reector, also for wide or asymmetric-
beam light distribution (F/F-WB/F-A)
Maxos 4MX092 TL-D slotted facetted
reector with direct/indirect light
distribution (F-S-D/I); a version for
emergency lighting is also available
(F-S-D/I-EL)
Maxos 4MX092 TL-D facetted
reector, for wide or asymmetric-beam
light distribution, with OLC semi-high-
gloss high-quality aluminum optic with
3D lamellae (4MX093 D6)
Maxos 4MX092 TL-D facetted
reector with prismatic refractor
(4MX093 P)
Maxos 4MX092 TL-D facetted
reector, for narrow or wide-beam
light distribution, with a lamellae louver
for facetted reector (4MX093 L)
Philips indoor luminaires8.16
Maxos
Light-line systems
Maxostrapezereectorsandoptics
The sturdy trapeze reectors for TL5 and TL-D are designed primarily
for applications in industry, supermarkets and shops. They are made of
steel with a white or silver outer nish. The reectors are optimized
for electrical units holding 1 or 2 TL5/TL-D lamps and provide an
excellent light output ratio.
There are basic trapeze reectors without an additional mirror inlay
and trapeze reectors with dedicated aluminum mirror inlays. These
are designed for wide-beam, narrow-beam and asymmetrical wall-
washing light distributions. Moreover, perforated and slotted trapeze
reectors (without mirror inlays) can be ordered for design reasons or
to create an indirect uplighting effect. For glare reduction, the trapeze
reector can be equipped with a steel louver.
Emergency lighting, for TL-D only
If emergency lighting by means of separately connected orientation
light units (E27-sockets) is required, special trapeze reectors with a
bigger cut-off must be used. The length of this reector corresponds
to that of the 58 W trunking length. A 36 W electrical unit plus the
orientation light unit will ll this length.
Maxos TL5
Trapeze reectors and optics
Type 4MX692 (TL5 reector)
4MX693 (TL5 louver/optic)
Suitable electrical unit For 1- and 2 TL5 49, 54 and 80 W versions
Material and light
distribution
Reector:
Steel, trapeze (T)
Steel, trapeze (T) with high gloss aluminum
mirror, medium beam (-MB)
Steel, trapeze (T) with high gloss aluminum
mirror, narrow beam (-NB)
Reector option:
Slotted, direct/indirect (T-S-D/I) or perforated
(T-P)
Louver:
Steel lamellae, white (L-T WH)
Installation Click-in xation on electrical unit
Accessory Trapeze reector end caps (9MX056 EP1-T WH/
SI)
Remarks Reectors and optics are suitable for 1- and 2-
lamp versions
Main applications Retail and general industry
Maxos TL-D
Trapeze reectors and optics
Type 4MX092 (TL-D reector)
4MX093 (TL-D louver/optic)
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions
Material and light
distribution
Reector:
Steel, trapeze (T)
Steel, trapeze (T), with high gloss aluminum
mirror, wide beam (-WB)
Steel, trapeze (T), with high gloss aluminum
mirror, narrow beam (-NB)
Steel, trapeze (T), with high gloss aluminum
mirror, asymmetrical half reector (-A)*
Steel, trapeze (T), with high gloss aluminum
mirror, asymmetrical wallwasher (TI-A)*
Reector option:
Slotted, direct/indirect (T-S-D/I) or perforated
(T-P)
Optic and louver:
Steel lamellae, white (L-T WH) or silver (L-T SI)
Installation Click-in xation on electrical unit
Accessory Trapeze reector end caps 1 and 2-lamp version
(9MX056 EP1-T WH/SI, 9MX056 EP2-T WH/SI)
Remarks * For 1-lamp version only
Dedicated reectors for 1- and 2-lamp TL-D
versions
Main applications Retail and general industry
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.17
Maxos
Light-line systems
Light-line systems
Maxos 4MX692 TL5 trapeze reector,
also for narrow or wide-beam light
distribution (T/T-NB/T-WB)
Maxos 4MX692 TL5 perforated
trapeze reector (T-P)
Maxos 4MX692 TL5 trapeze reector,
for narrow or wide-beam light
distribution, with a lamellae louver for
trapeze reector (4MX693 L-T)
Maxos 4MX692 TL5 slotted trapeze
reector (T-S-D/I)
TL5 TL-D
Maxos 4MX092 TL-D perforated
trapeze reector
Maxos 4MX092 TL-D trapeze reector,
also for narrow or wide-beam light
distribution (T/T-NB/T-WB)
Maxos 4MX092 TL-D trapeze reector,
for narrow or wide-beam light
distribution, with lamellae louver for
trapeze reector (4MX093 L-T)
Maxos 4MX092 TL-D trapeze reector,
also for narrow or wide-beam light
distribution (T/T-NB/T-WB)
Maxos, 4MX092 TL-D asymmetrical
trapeze reector
Philips indoor luminaires8.18
Maxos
Light-line systems
4MX092 WG Wing optic
Maxos TL-D Wing optic
The Wing optic is a reector solution creating soft indirect light,
without glare, and is ideal for ofce and shop applications. Designed
for electrical units holding 1 or 2 TL-D lamps, it is made of white
powder-coated steel and a perforated curved sheet conceals the
lamps. The 2-lamp version must be used with special electrical units
(lamp holder F32 mm).TL5 solutions are available on request.
The Wing optic is xed to the electrical unit via a simple click-in. The
reectors can be connected to each other without additional coupling
pieces, as they are delivered with an integrated connection side at one
end of the reector. Decorative end-plates for the beginning and end
of the light-line are available as accessories.
Maxos TL-D
Wing optic
Type 4MX092 WG
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions
Material Steel, white coated (WH)
Installation Click-in xation on electrical unit
Accessory End plates (9MX056 EP-WG)
Remarks *2-lamp versions of the Wing optic to be used
with dedicated electrical unit (with lampholder
F32 mm)
Main applications shops, ofces
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.19
Maxos
Light-line systems
Light-line systems
Philips indoor luminaires8.20
Maxos
Light-line systems
Maxos electrical units
The electrical units for Maxos trunking sections can hold 1 or 2
TL5 or TL-D lamps and are designed for quick and reliable click-in
mounting. They are made of steel with a white or silver coating.
The electrical units can be equipped with HFP electronic ballasts, HFR
dimming ballasts (allowing light output of a TLD-lamp to be regulated
from 3 to 100%), HF-DALI ballasts or low-loss conventional ballasts.
HFR and HF-DALI units must be mounted to 7-wire trunking sections.
The conventional ballasts are available parallel compensated (IC) or
inductive (I).
Special electrical units equipped with an emergency battery pack for
1 or 3 hours (EL1/EL3) are available. These units must be used with
7-wire trunking sections. If trunkings with double wiring are used, one
at ribbon cable will be connected to the central battery. This provides
a completely separate emergency lighting circuit.
Some 2-lamp TL-D reectors need dedicated electrical units (F32)
with a short distance between the lamps. On request, the TL-D
electrical units can be upgraded from IP20 to IP40 with an IP40 set
that is available as an accessory.
Maxos TL5
Electrical units
Type 4MX691
Lamp Fluorescent:
1 x or 2 x MASTER TL5 / G5 / 35, 54, 49, 80 W
Gear Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
High Frequency Regulator (HFR)
High Frequency Regulator, DALI (HFD)
Option Emergency lighting:
1 hour (EL1)
3 hours (EL3)
Material Sheet steel in white (WH) or silver (SI)
Installation Click-in xation (mechanical and electrical) on
trunking
Maxos TL-D
Electrical units
Type 4MX091
Lamp Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 36, 58 W
Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
High Frequency Regulator (HFR)
High Frequency Basic (HF-Dali)
Option Emergency lighting:
1 hour (EL1), 3 hours (EL3)
2-lamp lampholder of 32 mm (F32) to be used in
facetted and aluminum reectors, standard is 115
mm
Master/slave unit: pair of electrical units one with
gear (M) one without gear (S)
Material Sheet steel in white (WH) or silver (SI)
Installation Click-in xation (mechanical and electrical) on
trunking
Remarks Dedicated IP40 sets for upgrading from IP20 to
IP40
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.21
Maxos
Light-line systems
Light-line systems
Maxos 4MX691 TL5 1-lamp
electrical unit
Maxos 4MX691 TL5 2-lamp
electrical unit
TL5 TL-D
Maxos 4MX091 TL-D 2-lamp
electrical unit
Maxos 4MX091 TL-D 2-lamp
electrical unit; 32 mm lamp holders
(F32) enable smaller solutins using
1/2-lamp reectors.
Maxos 4MX091 TL-D 1-lamp
electrical unit
Philips indoor luminaires8.22
Maxos
Light-line systems
Maxos standard trunking
The trunking fulls two functions: rst, it provides a sturdy in-line
mounting rail on which to x the electrical units, and second, it
provides a housing for the electrical cables that bring power to the
units. All the trunking sections are made of hot-dip galvanized steel
with a white or silver nish and available in lengths of 1, 2 and 3
electrical units 36 W and 58 W.
A at ribbon cable (5 or 7 wires) or two at ribbon cables (2 x 5
or 2 x 7 wires) are integrated in the trunking and guarantee (in
combination with an integrated phase selection switch and contact
blocks) safe and correct cabling. The 7-wire cable is used to integrate
light regulation or emergency lighting for those electrical units that are
equipped with emergency battery packs. Double wiring (2 x 5 or 2 x 7
wires) is needed to provide a completely separate mains supply to the
electrical units. Double wiring is mostly used for emergency lighting
by central emergency batteries or separate switching. Hence, no extra
contact blocks or wiring are required.
For suspended light-lines, the trunking sections are connected using
the integrated electrical connector and a sturdy external mechanical
coupling piece (accessory). Surface-mounted light-lines use the same
integrated electrical connector and an internal coupler (accessory).
On the upper part of the trunking section, special knock-out openings
enable cable entry wherever needed.
The trunking is available with a complete range of interchangeable
components that optimize exibility. The outstanding stability of the
sections and coupling pieces allows suspension intervals of 3.4 to 5 m
(TL5) / 4.8 m (TL-D).
Maxos TL5
Standard trunkings
Type 4MX656
Length 1 x,2 x or 3 x length of electrical unit 49 W (491,
492 or 493), for 80 and 35 W electrical units as
well
1 x,2 x or 3 x length of electrical unit 54 W (541,
542 or 543)
Electrical circuit option 1 x or 2 x at ribbon cable, 5 or 7 wires:
1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)
1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)
Material Hot-dip galvanized steel in white (WH) or silver
(SI)
Accessory Trunking end piece, mains connection, trunking
coupling pieces, etc. (see chapter Maxos
accessories)
Remarks 7-wire cable for integration of light regulation or
emergency lighting
Double wiring for emergency lighting by central
emergency batteries or separate switching
Maxos TL-D
Standard trunking
Type 4MX056
Length 1 x, 2 x or 3 x length of electrical unit of 58 W
(581, 582 or 583) or 36 W (361, 362 or 363)
Electrical circuit option 1 x or 2 x at ribbon cable, 5 or 7 wires:
1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)
1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)
Material Hot-dip galvanized steel in white (WH) or silver
(SI)
Accessory Trunking end piece and mains connection set
(9MX056 EP SET), trunking coupling pieces etc.
(see chapter Maxos accessories)
Remarks 7-wire cable for integration of light regulation or
emergency lighting
Double wiring for emergency lighting by central
emergency batteries or separate switching
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires 8.23
Maxos
Light-line systems
Light-line systems
Maxos 4MX656 TL5 and
4MX056 TL-D standard trunking
section with 5-wire at ribbon cable
(5x1.5/5x2.5)
Maxos 4MX656 TL5 and
4MX056 TL-D standard trunking
section with 7-wire at ribbon cable
(7x1.5/7x2.5); for dimming (1-10 V),
DALI or emergency lighting with local
battery
Maxos 4MX656 TL5 and
4MX056 TL-D standard trunking
section with two 5-wire at ribbon
cables (2x5x1.5/2x5x2.5); to create
different zones in an application or use
central emergency systems
Maxos 4MX656 TL5 and
4MX056 TL-D standard trunking
section with two 7-wire at ribbon
cables (2x7x1.5/2x7x2.5); to create
different lighting zones with dimming or
separate emergency lighting
TL5/TL-D
Philips indoor luminaires8.24
Maxos
Light-line systems
Maxos projectors and HID solutions
Accent lighting is part of the integral concept of Maxos. The lightlines
can be equipped with almost the full range of different projectors next
to all the reector solutions based on TL5 and TL-D uorescent lamps.
Often in specic areas of shops projectors are requested in addition
to uorescent general lighting.
For Maxos trunkings with at ribbon cable (5 x 2.5, 7 x 2.5), units with
integrated 3C-rail are available. These units can be clicked into the
trunking sections like a regular electrical unit.
Projectors with a 3C adapter can be xed to the system. These can
be xed to the trunking similar to a regular electrical unit. 4MX013
facetted reector units with HID lamps are often used to illuminate
fruit and vegetables in supermarkets.
The electrical components are integrated in a white-coated housing
with the shape of a facetted reector. The lengths of these units
correspond to those of the 36 W trunking.
End-plates for the beginning and the end of the light-line are available
as accessories.
Type 4MX013
Facetted reector with HID-lamp units
Suitable trunking unit For trunking with at ribbon cable (5/7 wires),
length of electrical unit 36 W (361), other lengths
available on request
Light source 1-lamp or 2-lamp version:
HID:
1 x or 2 x MASTER SDW-T / PG12-1 / 50,
100 W
1 x or 2 x MASTERColour CDM-T / G12 /
70 W
Double lamp version:
1 x MASTER SDW-T / PG12-1 / 50 W and 1 x
MASTERColour CDM-T / G12 / 35 W
1 x MASTER SDW-T / PG12-1 / 100 W and 1 x
MASTERColour CDM-T / G12 / 70 W
Gear Electro magnetic (low loss), 230 V / 50 Hz:
Parallel compensated (IC)
Material Steel, white-coated, shape of a facetted reector
(F)
Installation Turning bolt xation (mechanical and electrical) on
trunking
Accessory Decorative end-plates
Main applications Retail (e.g. food, fashion)
Type 4MX094
3C units for projectors
Suitable trunking and
projectors
For trunkings with at ribbon cable (5/7 wires) to
x projectors with 3C adapter
Length Length of electrical unit 58 W (581) or 49 W
(491)
Projector xation 3-circuit power track adapter (3C)
Material Sheet steel, white (WH) or silver (SI)
Installation Click-in xation (mechanical and electrical) on
trunking
Main applications Retail (e.g. food, fashion)
Maxos 4MX013 HID-lamp units
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Maxos 4MX094 unit with integrated
3C rail and projector with 3C adapter
Philips indoor luminaires 8.25
Maxos
Light-line systems
Light-line systems
Type 4MX091
Projector adapter for Bus bar system
Suitable trunking and
projectors
For trunkings with Bus bar system only, to x
specic projectors with ceiling base plate
Length 600 mm
Material Sheet steel, white (WH) or silver (SI)
Installation Click-in xation (mechanical and electrical) on
trunking. Most Philips projectors, versions with
ceiling base plate - can be xed by screwing the
base plate to the projector adapter units
Main applications Retail (e.g. food, fashion)
Maxos TL-D
Extended trunking
Type 4MX056
Length 1 x or 2 x length of electrical unit 58 W (581 or
582)
Electrical circuit option Flat ribbon cable, 5 or 7 wires
Others on request
Extention length 300 and 600 mm in the middle (M), or in the
middle and at the end (ME)
Material Hot-dip galvanized steel in white (WH) or silver
(SI)
Accessory Trunking end piece and mains connection set
(9MX056 EP SET), trunking coupling pieces etc.
(see chapter Maxos accessories)
Maxos 4MX091 projector adapter Maxos 4MX056 TL-D extended
trunking section M300/E300/M600/
E600 and blind cover, used to close
the spaces in the trunking where no
electrical units are mounted; available in
white or silver
Maxos TL-D extended trunking
The extended trunking sections are made of hot-dip galvanized steel
with a white or silver nish. They are available in lengths of 1 and 2
electrical units of 58 W. Extensions of 300 and 600 mm in the middle
only (M), or in the middle and at the end of these trunking sections
(ME), allow interrupted lines where the gaps between the electrical
units correspond to the extended trunking length. The gaps can be
lled by blind covers, available as accessories.
A at ribbon cable (5 wires) is integrated in the trunking and
guarantees (in combination with an integrated phase selection switch
and contact blocks) safe and correct cabling.
For suspended light-lines, the trunking sections are connected using
the integrated electrical connector and a sturdy external mechanical
coupling piece (accessory). Surface-mounted light-lines use the same
integrated electrical connector and an internal coupler (accessory).
On the upper part of the trunking section, special knock-out openings
enable cable entry wherever needed.
Philips indoor luminaires8.26
Maxos
Light-line systems
Maxos TL-D IP64 trunking sections
The IP64 trunking sections are made of hot-dip galvanized steel with
a white powder coating. They are available in lengths of 1, 2 and 3
electrical units 36 W and 58 W. Special seals between the sections and
waterproof trunking end-pieces are used (to be ordered separately).
A at ribbon cable (5 or 7 wires) is integrated in the trunking and
guarantees (in combination with an integrated phase selection switch
and contact blocks) safe and correct cabling. The 7-wire cable is used
to integrate light regulation or emergency lighting for those electrical
units that are equipped with emergency battery packs. Hence, no extra
contact blocks or wiring need to be installed.
For suspended light-lines, the trunking sections are connected using
the integrated electrical connector and a sturdy external mechanical
coupling piece (accessory). Surface-mounted light-lines use the same
integrated electrical connector and an internal coupler (accessory).
On the upper part of the trunking section, special knock-out openings
enable cable entry wherever needed.
The IP64 trunking can be equipped with special IP64 electrical units
and different reectors.
The outstanding stability of the sections and coupling pieces allows
suspension intervals of 3.4 to 4.8 m.
Maxos TL-D
IP64 Trunking
(to be used with IP64 electrical unit only)
Type 4MX056
Length 1 x, 2 x and 3 x length of electrical unit 36 and
58 W
Wiring (1.5 or 2.5 mm²) Standard 5 pole (5x1.5 or 2.5)
Standard 7 pole for dimming (7x1.5 or 2.5)
Option Double wiring (for additional functionality)
Material Hot-dip galvanized steel, coated white (WH)
Accessory Trunking end pieces and mains connection set
(9MX056 EP IP64 SET), gasket between trunkings
(9MX056 GK IP64), blind cover (9MX056
BC36/58 IP64), PC procetion tube
Remarks Not for permanent wet conditions, corrosion
possible over time
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Maxos 4MX056 TL-D IP64 trunking
section
Blind cover IP64, white Gasket between trunking sections
Two trunking end caps including 1
electrical connector
Philips indoor luminaires 8.27
Maxos
Light-line systems
Light-line systems
Maxos TL-D IP64 electrical units
The IP64 electrical units are designed for quick and reliable mounting
in Maxos IP64 trunking sections. They are made of steel with a white
powder nish.
The high IP classication is possible due to special seals between the
trunking sections and to lamp holders with gasketted screw rings on
the IP64 electrical units. Maxos IP by is not designed for applications in
regular humid environments.
A connector block is mounted for electrical connection to the
trunking. The electrical units are equipped with electronic ballasts
(including dimmable and DALI) or low-loss conventional ballasts. The
conventional ballasts are available as parallel compensated (IC) or
inductive (I). The units can hold 1 or 2 TL-D lamps.
Dimmable versions are delivered with HF-R electronic ballast,
allowing the light output of the TL-D lamps to be regulated from 3 to
100%. HF-R and HF-DALI units must be mounted to 7-wire trunking
sections.
The electrical units can be combined with dedicated IP64 trapeze
reectors and a selection of aluminum reectors. These aluminum
reectors offer a choice of narrow-beam, asymmetrical-beam and
very-narrow-beam light distributions for 1 x 58 W. Units which comply
with the FF rules (limited surface temperature) are available on request.
Special electrical units equipped with an emergency battery pack for
1 or 3 hours (EL1/EL3) are available. These units must be used with
7-wire trunking sections.
Maxos TL-D
IP64 Electrical units
(to be used with IP64 trunking only)
Type 4MX091
Lamp Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 36, 58 W
Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive (I)
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
High Frequency Regulator (HFR)
Option Emergency lighting:
1 hour (EL1), 3 hours (EL3)
Material Sheet steel in white (WH)
Accessory Protection tube
Remarks Not for permanent wet conditions, corrosion
possible over time
To be used with standard trapeze reectors
(1-lamp) or dedicated IP64 trapeze reectors
(2-lamp) or dedicated aluminum reectors (on
request)
Maxos 4MX091 TL-D IP64 1-lamp
electrical unit
Maxos 4MX091 TL-D IP64 2-lamp
electrical unit
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Philips indoor luminaires8.28
Maxos
Light-line systems
MaxosTL-DIP63closedreectorunits
Maxos IP63 closed reector units are ready-to-install dedicated
luminaires for the Maxos trunking system. They are designed for
industrial applications requiring good protection of reectors against
dust, in particular the automotive industry and food industry. The unit
can be easily cleaned with a wet cloth.
The housing is made of steel with a white coating, while the cover is
made of tempered glass or, optionally, polycarbonate (PC); the inner
reector is made of aluminum.
Maxos IP63 closed reector units combine the functions of Maxos
electrical units, reectors and covers. They are designed for reliable
mounting on Maxos trunking sections in TL-D lengths. A connector
block is mounted on top of the units for electrical connection to the
trunking. Mechanical connection is realized by means of a safe bracket
with knee-lever clasp around the trunking. IP63 classication is valid
for the complete lamp, optical and ballast compartment; however, the
classication for the total system including IP20 trunking sections is
IP20.
The standard range is 1-lamp and 2-lamp TL-D 58 W with HF or
conventional ballast and TL5 80 W with HF ballast, all to be mounted
on the TL-D Maxos trunking system, optionally with EL3 emergency
lighting.
The units come with inner aluminum reectors for wide-beam (WB)
or asymmetrical-beam (A) light distribution. White louvers (4MX093
1/2 58 L-IP63-unit WH) are available as accessories.
Please note that Maxos is not designed for application in regular humid
environments.
Maxos TL-D
IP63 Reector unit
Type 4MX014
Lamp Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 58 W or 1x
or 2x TL5 80 W
Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
Reector Wide beam (-WB)
Asymmetric (-A)
Option Emergency lighting: 3 hours (EL3)
Material Housing: steel, white coated
Cover: tempered glass (GT) or polycarbonate
(PC) (optional)
Accessory Steel, white inlay louver (4MX093 1/2/58 L-IP63-
unit WH)
Remarks The electrical connection to the trunking is realized
via a pre-mounted connector block, the mechanical
connection via a bracket with knee-lever clasp
around the trunking
IP63 for optical compartment inclusive lamp- and
ballast compartment only, can be used with regular
IP20 at ribbon trunkings
Main applications Industry: automotive and food (cleanable front
screen)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Maxos 4MX014 IP63 closed reector
unit
Maxos 4MX014 IP63 closed reector
unit with louver
Philips indoor luminaires 8.29
Maxos
Light-line systems
Light-line systems
Philips indoor luminaires8.30
Maxos
Light-line systems
Accessories
Bracket for direct ceiling mounting;
available in white or silver
Chain bracket, adjustable; white or
silver
Chain bracket, xed; white, silver or
galvanized
Prole bracket for exposed T-proles;
available in white or silver
Mounting bracket including suspension
tube, 1250 mm; available in white or
silver
Mounting bracket for suspension wire;
available in white or silver
Mounting bracket including suspension
wire, 1250/3000 mm; available in white
or silver (MB-SW-L1250/MB-SW-
L3000)
Suspension wire, diameter 2 mm; per
meter
Ceiling cover and suspension wire,
1250 mm; available in white or silver
Ceiling xation with steel wire, 1250
mm; white, silver or zinc
Philips indoor luminaires 8.31
Maxos
Light-line systems
Light-line systems
Accessories
Flexible coupling joint; coupling piece
to connect exible coupling joint to the
trunking
Blind cover, used to close the spaces in
the trunking where no electrical units
are mounted; available in white or silver
End-piece set for trunking with mains
supply; available in white or silver
Coupling piece for trunking; available in
white or silver
Internal coupling piece for surface-
mounted trunking
Electrical supply connector, 7-pole; 10
pieces
IP40 set to upgrade TL-D electrical
units (1-lamp) from IP20 to IP40
IP40 set to upgrade TL-D electrical
units (2-lamps) from IP20 to IP40
Philips indoor luminaires8.32 Light-line systems
TTX400
Philips indoor luminaires 8.33Light-line systems
Light-line systems
TTX400 – the value of lighting
Good lighting contributes to our sense of well-being. In typical industrial
environments, the cost-effective TTX400 light-line system helps to increase
productivity, improve quality and safety, and reduce fatigue.
The experience of lighting
The TTX400 light-line system enhances the shopping experience by ensuring a perfect light
distribution in a host of design congurations, keeping the customers’ attention fully focused on
the merchandise.
www.philips.com/lighting
Multi-purpose white reector TL-DNarrow beam reector TL-D
White lamella louver for medium beam
and wide beam reectors TL5
Ultra-narrow beam reector TL5
Philips indoor luminaires8.34 Light-line systems
TTX400
1 Retail
In retail outlets such as hypermarkets, the TTX400 light-line system with TL5 lamps delivers
high lighting levels, focusing attention on the merchandise and creating a bright, stimulating
shopping atmosphere.
2 Logistics
To increase operating efciency in logistics facilities such as distribution centers and groupage
warehouses, the TTX400 light-line system delivers high horizontal illuminances in open
receipt and dispatch areas and high vertical illuminances on the racks, enhancing the visibility
of the whole rack, from oor to ceiling
1 2
Main applications
Philips indoor luminaires 8.35Light-line systems
Light-line systems
TTX400
2
3 Industry
The TTX400 light-line system helps to boost operating efciency in industrial facilities by
delivering high lighting levels – which help workers to focus better on the task in hand and
improve safety – while reducing energy consumption and maintenance.
4 Public areas
In public areas, e.g. libraries, the TTX400 light-line system with TL5 lamps delivers high lighting
levels, combined with low glare. This creates a bright, stimulating ambience that minimizes
visual fatigue.
3 4
Light-line systems
Philips indoor luminaires8.36 Light-line systems
TTX400
Inlayreectors
Louvers and optics
Trunkings
Suspension brackets
Electrical units
Reectors
Philips indoor luminaires 8.37Light-line systems
Light-line systems
ZTX400
TL-DTL5
TTX400
- white louver
- at proled aluminium
- high gloss parabolic lamella
- matt parabolic lamella
GGX555
GGX45. ..GGX555 ..
GMX5.. white GMX5.. aluminum GMX4.. white GMX4.. aluminum
TMX400 1 49 TMX40. 49TMX400 2 49 TMX400 1 58 TMX40. 58TMX400 2 58
TTX400 9 wire *
- bi-directional
- asymmetrical
- narrow beam
- asymmetric
- wide beam
- bi-directional
- white louver
- at proled aluminum
- matt parabolic lamellea
- perforated louver
- mesh louver
- high gloss parabolic lamella
- semi high gloss parabolic lamella
- prismatic panel
GGX450
- wide beam
- medium beam
- wide beam
- narrow beam
- ultra narrow beam
- asymmetric beam
- wall washer
- standard
- slotted
- perforated
- wall washer
- wide beam
- narrow beam
- very narrow beam
- ultra narrow beam
- asymmetric beam
- projectors
- halogen spots
2-lamp TL-D
2-lamp TL-D EL3
1-lamp TL-D
1-lamp TL-D EL3
- projectors
- halogen spots
2-lamp TL5
2-lamp TL5 EL3
1-lamp TL5
1-lamp TL5 EL3
5 x 1.5 mm
2
5 x 2.5 mm
2
7 x 2.5 mm
2
7 x 2.5 mm
2
+ 2 x 1.0 mm
2
5 x 1.5 mm
2
5 x 2.5 mm
2
7 x 2.5 mm
2
7 x 2.5 mm
2
+ 2 x 1.0 mm
2
TTX400 5 wire TTX400 7 wire TTX400 9 wire * TTX400 5 wire TTX400 7 wire
* see new alternative with TMX400 C-2R onto TTX400 7
Philips indoor luminaires8.38 Light-line systems
Click 1
The trunking is mounted on the
various suspension brackets.
Click 2
Trunkings are connected, mechanically
and electrically in one movement.
Click 3
Electrical unit is mounted.
Click 4
Reector is mounted on the electrical
unit.
Click 5
Connection unit with the power supply
is installed at the beginning of the line.
Just 5 clicks
TTX400 is installed with just 5 click-in actions.
No tools, no screws and no additional movements.
Fast, easy and secure.
TTX400
Philips indoor luminaires 8.39Light-line systems
Light-line systems
Daylight linking Manual override Movement detection
Switch on/off
or dim to
10, 20, 30%
Switch on/off
Best performance Best economy
ZTX400 MDU HFD ZTX400 MDU HFP
Movement detection (detector LRM8117)
Minimum light level without presence 0, 10, 20, or 30% 0
Maximum number of presence detectors per control unit 4 2*
Maximum cable length for movement detector 300 m 125 m
Daylight linking (light sensor LRL8102)
-
Number of light sensors per control unit 1 -
Manual control
(on, off and override)
-
Type of ballast HFD*** HFP
Maximum number of ballasts per line 64 **
TTX400 system 7 wire 5 wire
Linesense
With Linesense, TTX400 and controls are combined in one. The speed and ease
of installation of TTX400 remains when Linesense is used. In addition, substantial
energy savings up to 75% can be achieved. Linesense has been developed for
industrial applications like warehouses.
Installation clicks only
1 ZTX400 MDU control unit clicks onto the trunking.
2 Movement detector clicks on the bracket.
3 ZTX400 MB-MDU bracket clicks on the trunking.
4 Telejack cables click the detector and control unit together.
5 ZTX400 CU mains connection clicks on the control unit.
ZTX400 MDU
Pre-wired Linesense unit
with integrated control
function
ZTX400 MB-MDU
Mounting bracket for
movement detector
LRM8117/00
LRM8117/00
High-bay passive infrared
movement detector
Mounting height up to
15 m
TTX400
Linesense consists of a 618 mm piece
of trunking, which is fully pre-equipped
and wired to be added to the trunking.
The control function is integrated into
this extra unit, and can easily be clicked
between the light line and the electrical
connection unit. High bay movement
detectors are connected with standard
RJ-12 cables and mounted at the right
location with the use of dedicated
brackets. Linesense is equipped as
standard with a telejack splitter to
easily connect the detectors to the
light line.
* 2 presence detector s or 3 with LED disabled
** any number of luminaires allowed by the TTX400 light line system
*** HFD=HFR-DALI
TTX
400
TTX
400
Philips indoor luminaires8.40 Light-line systems
TTX400
TTX400aluminumreectors
These aluminum one-piece reectors for both TL5 and TL-D lamps
are available in hammered, matt and glossy versions. The TL5 ones are
smaller due to the smaller lamps, resulting in easier handling and less
space needed. TTX400 aluminum reectors are specially designed for
applications where a wide beam, narrow beam, very narrow beam
or ultra- narrow beam is required e.g. distribution centeres and
warehouses. Installation is via a simple click-in action to the electrical
units TMX400. The high efciencies of these reectors ensure a highly
cost effective solution. Reector overlapping and mechanical clips
delivered with the reectors enable proper alignment in the event of
continuous lines. All aluminum reectors are available for 49 W and
54 W lengths.
TTX400 TL5
Aluminum reectors
Type GMX565, GMX566, GMX567, GMX570
Suitable electrical unit For 1 and 2 TL5 35/49/80 W and 54/28 W
versions
Material and light
distribution
GMX565:
matt aluminum, narrow beam (M-NB)
high-gloss hammer-bow aluminum, narrow beam
(HB-NB)
GMX566:
matt aluminum, wide beam (M-WB)
high-gloss hammer-bow aluminum, wide beam
(HB-WB)
high-gloss hammer-bow aluminum, asymmetric
beam (HB-A)
GMX567:
matt aluminum, asymmetric beam (M-A)
GMX570:
high-gloss aluminum, ultra narrow beam (C-NB)
high-gloss hammer-bow aluminum, ultra narrow
beam (HB-NB)
Installation One click-in action to electrical unit
Remarks All reectors are in one piece
Reectors are suitable for 1- and 2 lamp versions,
GMX566 M-WB and HB-A for 49 W version only
Main applications Retail (e.g. food, fashion), industry, warehouses
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
TTX400 TL-D
Aluminum reectors
Type GMX440, GMX460, GMX465, GMX466, GMX467,
GMX470
Suitable electrical unit For 1 and/or 2 TL-D 36 and 58 W versions
Material and light
distribution
GMX440:
matt aluminum, for general lighting, both 1- and
2-lamp 36 and 58 W version*
GMX460:
high-gloss aluminum, narrow beam (C-NB),
1-lamp 58 W version*
GMX465:
high-gloss hammer-bow aluminum, narrow beam
(HB-NB), 1- and 2-lamp 58 W version*
matt aluminum, narrow beam (M-NB), 1- and
2-lamp 58 W version*
GMX466:
high-gloss hammer-bow aluminum, asymmetrical
(wall washer) beam (HB-A), 1-lamp 58 W
version*
high-gloss hammer-bow aluminum, wide beam
(HB-WB), 2-lamp 58 W version
matt aluminum, wide beam (M-WB), 2-lamp
58 W version
GMX467:
matt aluminum, asymmetrical beam (M-A),
1-lamp 36 and 58 W version*
GMX470:
high-gloss aluminum, very narrow beam (C-NB),
1-lamp 58 W version*
* Also for TMX400 electrical unit, 2-lamp version
with F32 lampholder
Installation One click-in action to electrical unit
Remarks All reectors are of one piece
Main applications Retail (e.g. food, fashion), industry, warehouses
Philips indoor luminaires 8.41
Light-line systems
Light-line systems
TTX400
TL5
GMX565 one-piece narrow beam
reector made from matt aluminum
GMX566 one-piece wide-beam
reector made of matt aluminum
(M-WB)
GMX566 one-piece asymmetrical
reector made of high-gloss hammered
aluminum
GMX570 one-piece narrow beam
reector made of high-gloss aluminum
(C-NB)
GMX565 one-piece narrow-beam
reector made of hammered aluminum
(HB-NB)
GMX566 one-piece wide beam
reector made of hammered aluminum
(HB-WB)
GMX567 one-piece asymmetrical
reector made of matt aluminum
(M-A)
GMX570 one-piece narrow-beam
reector made of hammered aluminum
(HB-NB)
Philips indoor luminaires8.42 Light-line systems
TTX400
GMX440 one-piece general-lighting
reector made from matt aluminum
GMX460 one-piece narrow beam
reector made from high-gloss
aluminum
GMX465 one-piece narrow beam
reector made from matt aluminum
GMX465 one-piece narrow beam
reector made from high-gloss
hammered aluminum
GMX466 one-piece wide-beam
reector made from high-gloss
hammered aluminum (HB-WB)
GMX466 one-piece wide-beam
reector made from matt aluminum
GMX466 one-piece wall-washer
reector made from high-gloss
hammered aluminum (HB-A)
GMX467 one-piece asymmetric beam
reector made from matt aluminum
GMX470 one-piece narrow-beam
reector made from high-gloss
aluminum (C-NB)
TL-D
Philips indoor luminaires 8.43
Light-line systems
Light-line systems
TTX400
Philips indoor luminaires8.44 Light-line systems
TTX400
TTX400multi-purposereectors
These multifunctional one-piece reectors for TL5 and TL-D lamps
are designed for applications requiring high technical lighting quality
and design. They can be extended by the addition of various optics,
mirrors and attachments. Installation is done via a simple click-in on
the electrical units.
TTX400 TL5
Multi-purpose reectors
Type GMX555
Suitable electrical unit For 1 and 2 TL5 35 / 49 / 80 W and 28 / 54 W
versions
Material and light
distribution
Steel, pre-lacquered white, wide beam (-WB)
Steel, pre-lacquered white, medium beam (-MB)
Steel, pre-lacquered white, perforated, medium
beam (RP-MB)
Installation One click-in action to electrical unit
Accessory Coupling pieces, end plates
Remarks All reectors are in one piece
Reectors can be equipped with various optics,
mirrors and attachments
Main applications Retail (e.g. food, fashion), industry
TTX400 TL5
Mirror inserts
Type GMX555
Suitable reectors Multi-purpose reectors GMX555 MB, 35 / 49 /
80 W and 28 / 54 W versions
Material and light
distribution
High-gloss aluminum, medium beam, bi-directional,
max at 20º (MB C-BD20 SET)
High-gloss aluminum, medium beam, bi-directional,
max at 40º (MB C-BD40 SET)
High-gloss aluminum, medium beam, bi-directional,
max at 50º (MB C-BD50 SET)
High-gloss aluminum, asymmetrical beam, max at
20º (MB C-A20 SET)
High-gloss aluminum, asymmetrical beam, max at
40º (MB C-A40 SET)
Semi-high-gloss aluminum, medium beam,
bi-directional, max at 20º (MB D-BD20 SET)
Installation Clicking into reector
Remarks Mirror inserts delivered mounted in reector
(GMX555 MB SET) or as spare parts (GGX555
C-BD/A as universal piece for both beams 20º
and 40º)
Main applications Retail (e.g. food, fashion)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
TTX400 TL-D
Multipurpose reectors
Type GMX450
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions
Material and light
distribution
Steel, pre-lacquered white
Steel, pre-lacquered white, perforated (RP)
Steel, pre-lacquered white, slotted (RS)
Installation One click-in action to electrical unit
Accessory Coupling pieces (white or transparent for
perforated reectors), end plates
Remarks Reectors can be equipped with various optics,
mirror inserts and attachments
Main applications Retail (e.g. food, fashion), industry
Philips indoor luminaires 8.45
Light-line systems
Light-line systems
TTX400
TL5
GMX555 TL5 multi-purpose
reector(s) for wide beam light
distribution
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB)
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB) and high-gloss bi-
directional optic, 20° (C-BD20)
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB) and high-gloss
asymmetrical optic, 20° (C-A20)
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB) and high-gloss
asymmetrical optic, 40° (C-A40)
GMX555 TL5 perforated multi-
purpose reector(s), for medium-beam
light distribution (RP-MB)
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB) and high-gloss bi-
directional optic, 50° (C-BD50)
GMX555 TL5 multi-purpose
reector(s), for medium-beam light
distribution (MB) and high-gloss bi-
directional optic, 40° (C-BD40)
GMX450 TL-D multi-purpose
reector(s) standard version
TL-D
Philips indoor luminaires8.46 Light-line systems
TTX400
TTX400TL-Dbasicreectors
This basic one-piece white reector is designed for applications
not requiring optics, mirrors or attachments. It is an efcient and
economical solution.
Installation is done via a simple click-in on the electrical units.
TTX400 TL-D
Basic reectors
Type GMX430
Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions
Material and light
distribution
Steel, prelacquered white
Installation One click-in action to electrical unit
Accessory Coupling pieces, end plates
Remarks To be used when optics, mirrors and attachments
are not needed
Reector is of one piece
TMX400 F32 can be tted with 1-lamp reector
Main applications Industry
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
GMX430 TL-D basic reector(s)
Philips indoor luminaires 8.47
Light-line systems
Light-line systems
TTX400
Philips indoor luminaires8.48 Light-line systems
TTX400
TTX400 louvers and optics
A wide range of different louvers and optics can be mounted in the
multifunctional reector GMX555/GMX450 for TL5 and TL-D lamps
respectively. These attachments offer many possibilities to shield the
lamps and therefore improve comfort. Each attachment is available in
1-lamp and 2-lamp versions. Changing the lamp remains simple and
quick as the attachments are hinged.
The attachments, optics and mirror inserts can only be used in
combination with the respective functional reector.
TTX400 TL5
Louvers and optics
Type GGX555
Suitable reectors Multi-purpose reectors GMX555, 35 / 49 / 80 W
and 28 / 54 W versions
Material and light
distribution
High-gloss aluminum, double parabolic, closed (C6)
High-gloss aluminum, double parabolic, closed (C6),
with top reector (T)
Matt aluminum, double parabolic louvers, closed
(M6)
Matt aluminum, ribbed cross louvers (M2)
Lamellae louvers, white (L)
Universal insert, beam 20 or 40º (C-BD/A)
Remarks C6 and M6 can only be mounted in GMX555 MB
L and M2 can be mounted in both GMX555 MB
and WB
Inserts can be mounted only in GMX555 MB
Main applications Retail (e.g. food, fashion), industry
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
TTX400 TL-D
Louvers and optics
Type GGX450
Suitable reectors Multi-purpose reectors GMX450, 36 and 58 W
versions
Material and light
distribution
High-gloss aluminum, double parabolic, closed (C6)
Semi-high-gloss aluminum, double parabolic (D6)
Matt aluminum, parabolic lamellae (M5)
Matt aluminum, ribbed cross louvers (M2)
Lamellae louvers, white (L)
Lamellae louvers, perforated, white (LP)
Mesh louver, square mesh cover, white (ML)
Prismatic cover (P)
Main applications Retail (e.g. food, fashion), industry
Philips indoor luminaires 8.49
Light-line systems
Light-line systems
TTX400
TL5
GMX555 TL5 multi-purpose
reector(s) and GGX555 OLC high-
gloss high-quality aluminum optic with
3D lamellae louver (C6)
GMX555 TL5 multi-purpose
reector(s) and GGX555 white lamella
louver (L)
GMX555 TL5 multi-purpose
reector(s) and GGX555 matt high-
quality aluminum optic with proled
lamellae louver (M2)
GMX555 TL5 multi-purpose
reector(s) and GGX555 OLC matt
high-quality aluminum optic with 3D
lamellae louver (M6)
GMX555 TL5 multi-purpose
reector(s) and GGX555 high-gloss
bi-directional/asymmetrical optic (C-
BD/A), beam 20 or 40º
GMX555 TL5 multi-purpose
reector(s) and GGX555 OLC high-
gloss high-quality aluminum optic with
3D lamellae louver and top reector
(C6T)
Philips indoor luminaires8.50 Light-line systems
TTX400
GMX450 TL-D multi-purpose
reector(s) and GGX450 matt
standard-quality aluminum parabolic
cross-lamellae louver (M5)
GMX450 TL-D multi-purpose
reector(s) and GGX450 OLC high-
gloss high-quality aluminum optic with
3D lamellae louver (C6)
GMX450 TL-D multi-purpose
reector(s) and GGX450 OLC semi-
high-gloss high-quality aluminum optic
with 3D lamellae louver (D6)
GMX450 TL-D multi-purpose
reector(s) and GGX450 standard-
quality aluminum proled cross-
lamellae louver (M2)
GMX450 TL-D multi-purpose
reector(s) and GGX450 white
lamellae louver (L)
TL-D
Philips indoor luminaires 8.51
Light-line systems
Light-line systems
TTX400
TTX400 TL-D mirror inserts
Mirror inserts improve the distribution of light. They are especially
suitable for applications where directed beams are needed. Installing
mirror inserts is as easy as all other components: they are laid into the
edge prole of the multifunctional reector (GMX450).
TTX400 offers various types of mirror insert (narrow, wide and
asymmetrical beam).
TTX400 TL-D
Mirror inserts
Type GGX451, GGX452 (to be mounted in GMX450
1-lamp version)
GGX453, GGX454 (to be mounted in GMX450
2-lamp version)
Suitable reectors Multipurpose reectors GMX450, 36 and 58 W
versions
Material and light
distribution
GGX451: matt aluminum, narrow beam (M-NB),
1-lamp 36 and 58 W version
GGX452: matt aluminum, wide beam (M-WB),
1-lamp 36 and 58 W version
GGX453: matt aluminum, wide beam (M-WB),
2-lamp 36 and 58 W version
GGX454: high-gloss aluminum, bi-directional beam
(C-BD), 2-lamp 58 W version
Installation Clicking into reector
Remarks Reector GGX451 is of one piece, other ones of
two pieces
Mirror inserts delivered separately
Main applications Retail (e.g. food, fashion), industry
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
GMX450 TL-D 1-lamp multipurpose
reector(s) and GGX452 wide-
beam mirror insert made from matt
aluminum (M-WB)
GMX450 TL-D 2-lamps multipurpose
reector(s) and GGX453 wide-
beam mirror insert made from matt
aluminum (M-WB)
Philips indoor luminaires8.52 Light-line systems
TTX400
TTX400 electrical units
These electrical units are designed for quick-click mounting in TTX400
trunking sections. They are for use with one or two TL5 or TL-D
lamps, with electronic (dimming) ballast (or conventional ballast in the
case of TL-D), and are available in emergency lighting versions and in
versions for the mounting of projectors. They contain all the necessary
electrical and mechanical functions. All components are screwed onto
the electrical unit. The units can be combined with any type of reector
and are made of white sheet steel.
TMX400 is delivered with electronic ballast HFP. The dimmable version
of the TMX400 is delivered with the electronic ballast HFR, allowing
the light output of the TL5 lamps to be regulated from 3 to 100 %. This
unit is ideal for (day)light-dependent control and must be mounted to
the prewired TTX400 section with 7-wire ribbon cable. The TMX400
units with conventional ballasts are supplied with an electrical
connector, starters, any necessary capacitor and lampholders. For
more control options the TMX400 can be equipped with DALI ballasts.
Especially in combination with Linesense controls DALI solutions offer
even greater control and energy savings.
TMX400 is deliverable in versions with in-built 3-hour or 1-hour
emergency lighting. For conguration of both emergency lighting and
regulation or DALI, TTX400 9-wires is to be used with TMX400 9. The
new solution of standard TTX400 7-wires with new units TMX400
C-2R is recommended.
TTX400 TL5
Electrical units
Type TMX400
Light source Fluorescent:
1 x or 2 x MASTER TL5 / G5 / 28, 35, 49, 54,
80 W
Gear Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
High Frequency Regulator (HFR)
High Frequency Regulator, DALI and Touch
(HFR-TD)
Option Emergency lighting:
1 hour (EL1), 3 hours (EL3)
Master/Slave:
1 master + 1 slave (M/S), both master and slave
(M-S)
HFR/HFR-TD with emergency lighting: TMX400 9
for trunking 9 wires or preferably TMX400 2-CR
to be used with TTX400 7-wires (thereby in case
of non-continuous lightline, to order throughwiring
ZTX400 C1300-2 or C1600-2 as accessory)
Material Sheet steel, white
Installation Click-in xation (both mechanical and electrical
connection) on trunking TTX400 with 5- or 7-wire
ribbon cable
Accessory Blind covers (BC)
Throughwiring set to be used in combination
with TMX400 C2R onto TTX400 7, in the case of
non-continuous lightline (ZTX400 C1300-2 for
1 section 28/54 W; ZTX400 C1600 for 1 section
35/49/80 W).
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
TTX400 TL-D
Electrical units
Type TMX400
Light source Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 36, 58 W
Gear Electro magnetic (low loss), 230 V / 50 Hz:
Inductive (I)
Inductive with possible mounting of capacitor in
parallel (IKP)
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
High Frequency Regulator (HFR)
High Frequency Regulator, DALI and Touch
(HFR-TD)
Option Emergency lighting:
1 hour (EL1), 3 hours (EL3)
Master/Slave:
1 master + 1 slave (M/S)
both master and slave (M-S)
2-lamps lampholder with small width (F32)
HFR/HFR-TD with emergency lighting: TMX400 9
for trunking 9 wires or preferably TMX400 C-2R
to be used with TTX400 7-wires (thereby in case
of non-continuous lightline, to order throughwiring
/ ZTX400 C1300-2 or C1600-2 as accessory)
Material Sheet steel, white
Installation Click-in xation (both mechanical and electrical
connection) on trunking TTX400 with 5- or 7-wire
ribbon cable
Accessory Blind covers
Throughwiring set to be used in combination with
TMX400 C-2R onto TTX400 7, in the case of
non-continuous lightline (ZTX400 C1300-2 for
1 section 28/54W; ZTX400 C1600 for 1 section
35/49/80 W)
Philips indoor luminaires 8.53
Light-line systems
Light-line systems
TTX400
1-lamp TL5 electrical unit
TMX400 2-lamps TL5 electrical unit
TL5 TL-D
TMX400 2-lamps TL-D electrical unit
TMX400 1-lamp TL-D electrical unit
TMX400 1-lamp TL-D F32 electrical
unit
Philips indoor luminaires8.54 Light-line systems
TTX400
TTX400 trunking sections
This trunking system for TL5 and TL-D lamps comprises prewired
sections (TTX400) and optional unwired sections (TTX410). The
sections can be easily clicked together using the integrated electrical/
mechanical coupling pieces. The trunking is available with a complete
range of interchangeable components to offer outstanding exibility.
All the trunking sections are made of white prelaquered steel. Round
edges reduce the risk of injury. Flat-ribbon cable (5 or 7 wires), an
integrated phase-selection switch and contact blocks with click
connection make electrical and mains connection quick, simple and
safe (if 3 phases are used equalised, the maximum current is 16 A).
The rigidity of the sections and coupling pieces limits the number of
mounting brackets needed (max. 3 meters when using 493 trunking
sections). The electrical unit is simply clicked into the trunking for both
mechanical and electrical connection.
The prewired section TTX400 is equipped standard with a 5- or
7-wire 2.5 or 1.5 mm² at ribbon cable. The 7-wire at ribbon cable
is used especially for the integration of light regulation or emergency
lighting functions. Hence, no extra contact blocks or wiring need to be
installed. TTX400 is available in lengths of 1, 2 and 3 electrical units of
TL5 28/54 W, 35/49/80 W and TL-D 36 W and 58 W. It is also available
in 9 wires (7-wire at-ribbon plus 2 additional low-voltage cables for
dimming) for the integration of light regulation and emergency lighting
functions. The new optimized and recommended solution, instead of
TTX400 9, consists of the standard TTX400 7-wire at-ribbon and the
new electrical units TMX400 C-2R.
TTX400 is also available with a 5-wire 1.5 mm² ribbon cable, in the
same lengths as mentioned before; to be used in combination with
HFP units.
TTX400 TL5
Standard trunkings
Type TTX400 (prewired)
Length 1 x, 2 x or 3 x length of electrical unit 49 (491, 492
or 493), also applicable for 80 and 35 W electrical
unit
1 x, 2 x or 3 x length of electrical unit 54 (541, 542
or 543), also applicable for 28 W electrical unit
Electrical circuit option TTX400 5: 1 x at ribbon cable, 5 wires, 1.5 and
2.5 mm²
5-wire: standard at ribbon cable (5)
TTX400 7: 1 x at ribbon cable, 7 wires, 2.5 mm²
7-wire: standard at ribbon cable (7)
TTX400 9: 9-wires
7-wire standard at ribbon cable + 2 hardcore
cables 1 mm² (9)
7-wire standard at ribbon cable + 2 cables
1 mm² for communication purpose (9T)
Alternative to TTX/TMX400 9 : TTX400 7 +
TMX400 C-2R
Phase selection switch and contact blocks with
click connection are integrated
Connection Connection box ZTX400 CU or ZTX400 CM
Trunking piece TTX400 CU7 (to be completed
with ZTX400 EP-CU)
Universal TTX400 CM-CU for cable entry at the
beginning of light-line or in the middle
Material Steel, prelacquered white
Accessory Suspension/mounting brackets, external coupling
piece, etc, see TTX400 accessory section
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
TTX400 TL-D
Standard trunkings
Type TTX400 (prewired)
Length 1 x, 2 x or 3 x length of electrical unit 36 or 58 W
(361, 362 or 363 resp 581, 582 or 583)
Electrical circuit option TTX400 5: 1 x at ribbon cable, 5 wires, 1.5 and
2.5 mm²
5-wire: standard at ribbon cable (5)
TTX400 7: 1 x at ribbon cable, 7 wires, 2.5 mm²
7-wire: standard at ribbon cable (7)
TTX400 9: 9-wires
7-wire standard at ribbon cable + 2 hardcore
cables 1mm² (9)
7-wire standard at ribbon cable + 2 cables
1 mm² for communication purposes (9T)
Alternative to TTX/TMX400 9 : TTX400 7 +
TMX400 C-2R
Option:
1, 2, 3 section prewired trunking with 2 circuits
at ribbon 5 wires (2C5)
1, 2, 3 section prewired trunking with 2 circuits
at ribbon 7 wires (2C7)
Phase selection switch and contact blocks with
click connection are integrated
Connection Connection box ZTX400 CU or ZTX400 CM
Trunking piece TTX400 CU7 (to be completed
with ZTX400 EP-CU)
Universal TTX400 CM-CU for cable entry at the
beginning of light-line or in the middle
Material Steel, prelacquered white
Accessory Suspension/mounting brackets, external coupling
piece, etc, see TTX400 accessory section
Philips indoor luminaires 8.55
Light-line systems
Light-line systems
TTX400
TL5/TL-D
Pre-wired TTX400 trunking with 7-
wire ribbon cable
Pre-wired TTX400 trunking with 5-
wire ribbon cable
TTX410 (optional)
TTX410 is the unwired trunking section that allows the electrical
units to be mounted in any desired position. On the upper part of the
trunking section, special knock-out openings enable cable entry. The
mains connection can be made with the 7-pole connector ZTX410 TC.
Electrical connection to the electrical unit can be made with a 5-pole
contact block with insert contacts (ZTX400 DC). These connection
blocks can be installed at any place inside the trunking sections. The
required wiring can be xed inside the trunking section by using
internal cable clips (ZTX410 IC). When electrical units are used with
conventional or low-loss ballasts, H07GU (110 ºC) cables should be
used. When electronic ballasts are used, H07VU (70 ºC) cables are
sufcient. The TTX410 unwired trunking sections are delivered with
the mechanical coupling piece. This unwired system is also well suited
to mounting waterproof or surface-mounted luminaires.
TTX400 CM-CU
TTX400 491 7 CM-CU-PI is a 1-length 58 W trunking section with a
7-pole connector. It is a universal and exible piece for mains supply
entry at the beginning or middle of the light-line. It is an alternative to
ZTX400 CU, TTX400 CU7 or ZTX400 CM.
TTX400 TL-D
Standard trunkings
Type TTX410 (unwired)
Length 2 x or 3 x length of electrical unit 58 W (582 or
583)
Material Steel, prelacquered white
Accessory Connection units, suspension/mounting brackets,
external coupling piece, etc, see TTX400 accessory
section
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Unwired TTX410 trunking
Philips indoor luminaires8.56 Light-line systems
TTX400
TTX400 units for projectors
Increasingly, accent lighting is integrated in functional and general
lighting systems, especially in applications like shops, showrooms
and public buildings such as museums. The TTX400 light-line system
can be equipped with different types of projector to meet these
lighting needs. Thanks to its modular concept, TTX400 offers great
exibility in the installation of projectors. For example, a change in
the conguration of the shop oor lay-out can be easily followed by
changing the positions of the projectors on the light-line.
Electrical unit with an integrated
3-circuit rail. Standard projectors can
be mounted in the rail. The maximum
weight of the mounted projectors is
9 kg. Alternative now available with
surface-mounted rail
Electrical unit with 4 Express
connection points for low-voltage
halogen spots. This unit has 2 built-in 12
V / 105 W transformers
Electrical unit with 2 connection points
for projectors with e.g. CDM-T or
SDW-T lamps. The projectors are
mounted with the spot bracket on the
trunking section
Philips indoor luminaires 8.57
Light-line systems
Light-line systems
TTX400
Philips indoor luminaires8.58 Light-line systems
TTX400
TTX400/410 suspension-/mounting brackets
The TTX400 suspension-/mounting brackets have been designed to
allow maximum ease and speed in installation and to provide the
greatest possible exibility in use. All brackets are simply clicked on the
trunking. They are suitable for direct xation or with chains, threaded
rods and steel cables for suspension xation. Distance between the
brackets is up to 3 meters (when using the 583 trunking sections),
Chain bracket cable duct for
suspending the TTX400/410 sections
with the plastic cable duct ZTX400
582/583 CD from chains or steel
cables; includes adjustable suspension
hook
Prole bracket for mounting
TTX400/410 sections onto system
ceilings with visible 24 mm T-proles
Universal bracket for suspending
TTX400 section including unwired
section TTX410, which then serves as
a cable duct
Adjustable suspension hook with 2
brass nuts for use with ZTX400 UB,
ZTX400 UCD or ZTX400 CDB
resulting in faster installation and lower costs. All mounting
and suspension brackets are constructed from galvanised
stainless steel, painted white.
Ceiling mounting bracket (8 mm
diameter hole) for mounting
TTX400/410 sections directly onto
the ceiling
Cable suspension bracket for
suspending the TTX400/410 sections
from steel cable M 1.8. Integrated
clasp mechanism allows easy, tool-less
adjustment of the mounting height.
Steel cable can be ordered separately
with accessory ZTX400 SW1.8-10000
Suspension-/mounting brackets
Philips indoor luminaires 8.59
Light-line systems
Light-line systems
TTX400
Universal bracket for suspending
TTX400/410 sections with threaded
rods or M13 internally threaded
suspension tubes
Chain bracket for suspending
TTX400/410 sections from chains
or steel cables; includes adjustable
suspension hook
Universal bracket for suspending
TTX400/410 sections, including plastic
cable duct ZTX400 CD 582/583,
with threaded rods or M13 internally
threaded suspension tubes
Bracket for projectors. This bracket can
be installed on TTX400 with reector
and louver, so no interruption of the
continuous light-line
Connection unit consisting of a 7-pole
contact block with 2.5 mm² contacts
and mains connection strain-relief for
use at the beginning of a light-line. The
same connection unit is used for the
TTX400 with either the internal 5- or
7-wire at ribbon cable
Mounting bracket for surface mounted
luminaire
Mounting bracket for waterproof
luminaire
Accessories
Philips indoor luminaires8.60 Light-line systems
TTX400
ZTX400 coupling piece for GMX450
TL-D multi-purpose reector(s)
ZTX400 end caps for GMX450 TL-D
multi-purpose reector(s) (EP1-450/
EP2-450)
ZTX400 coupling piece for GMX430
TL-D basic reector(s)
ZTX400 end caps for GMX430 TL-D
basic reector(s)
ZTX400 end caps for GMX555 TL5
multi-purpose reector(s)
ZTX400 coupling piece for GMX555
TL5 multi-purpose reector(s)
White plastic end plate to cover the
trunking; includes a knock-out hole of
20 mm, Philips-branded (PHL)
ZTX400 transparent coupling piece
for GMX450 TL-D perforated multi-
purpose reector(s)
Blind cover, used to close the spaces in
the trunking where no electrical units
are mounted. Also available in length of
36, 49 or 58 W.
ZTX400 coupling piece for GMX555
TL5 multi-purpose reector(s)
Philips indoor luminaires 8.61
Light-line systems
Light-line systems
TTX400
Structure parts with xed angles, for
use with prewired TTX400 light-line.
This structure part is delivered with
integrated coupling piece and internal
through-wiring. Can be used for X-,
T- and L congurations
Cable duct, for installing on the
trunking, in white plastic, with a length
of 2 or 3 electrical units. Can be closed
with blind cover strips. To be used
in combination with the suspension
brackets ZTX400 UCD/CCD. Also
available in length of 49, 54 W.
Steel wire, diameter 1.8 mm², length
10 m
Internal coupling piece
Through-wiring connector Electrical connector for attaching
waterproof and surface-mounted
luminaires to the prewired trunking
TTX400. This electrical connector can
be clicked on the connection block as
mounted standard in the TTX400 light-
line (also ZTX400 DC). The electrical
connector comprises insert contacts
and a strain reliever
A 5-pole connection block for
connecting the electrical unit when
using the unwired TTX410 proles.
The same connection block is used
as an additional block for the pre-
wired TTX400 when connecting to
emergency lighting or light regulation.
The connector is clicked inside the
trunking and allows through-
The continuous-line connection unit
is used at the end of a light-line when
a through-connection is needed to
pass an interruption of the light-line. It
comprises a 7-pole screw connection
block. The same continuous-line
connector is used for the TTX400 with
either the internal 5- or 7-wire at
ribbon cable. Not to be used for
The middle-of-line connection unit
enables the mains connection to be
made in the middle of a light-line. The
unit comprises two 7-pole connection
blocks for mains connection. To be used
in the middle of a light-line when very
long lines are used, to restart mains
supply in both directions. The same
middle-of-line connection unit is
Cable clips for guiding and easy-click
xing of wires in both TTX400 and
TTX410 trunking sections
Philips indoor luminaires8.62 Light-line systems
TTX400
TTX400 Linesense
TTX400 with Lighting Controls
Applying Lighting Controls in industry contributes to efcient and
effective lighting solutions. For TTX400 applications, Philips Lighting
offers various standard trunking system based controls solutions,
included in the Linesense range. These solutions offer an intelligent
light-line, which remains easy-to-install.
With Linesense, TTX400 and lighting controls are combined in one,
creating an intelligent light-line which is still easy to install. It allows
substantial energy savings of up to 75%. Developed for industrial
applications like warehouses,
Linesense consists of a 618 mm section of trunking, which is fully pre-
equipped and wired for addition to the trunking. The control function
is integrated into this extra unit and can easily be clicked between
the light-line and the electrical connection unit. Movement detectors
are connected with standard RJ-12 cables and mounted at the right
location with the use of dedicated brackets. Linesense is equipped as
standard with a telejack splitter to easily connect the detectors to the
light-line.
Fully assembled TTX400 Linesense unit
ZTX400 MDU-D Linesense unit
suitable for movement detection
(dimming or switching off), daylight
linking and manual control; works with
HFR DALI ballasts
The ZTX400 MB-MDU is a Linesense
mounting bracket for clicking
movement detector LRM 8115/00 or
LRM 8117/00 to the trunking section.
The right tilt angle can be adjusted
manually and is to be checked by a walk
test. The same tilt angle can be easily
reproduced on more sensors thanks to
a click graduation on the bracket
Light sensor intended for high-bay
mounting (approx. 7.5 m high).
Intended for use with the Linesense
control (ZTX400 MDU-D). An
installation bracket is included. The
sensor is connected to the control
unit with a modular plug-in (RJ-12)
connector cable
High-bay passive infrared movement
detector (mounting height up to
15 m), equipped with an adjustable
delay timer (up to 35 minutes). Can
be used with all MDU control units. A
dedicated mounting bracket (ZTX400
MB-MDU) is available, into which the
movement detector can be clicked
Accessories
Philips indoor luminaires 8.63
Light-line systems
Light-line systems
TTX400
Philips indoor luminaires8.64
Light-line systems
TTX150
Philips indoor luminaires 8.65
Light-line systems
Light-line systems
Tetrix TTX150 – a simple solution
Tetrix TTX150 is a compact light-line characterized by simplicity. It comes with
everything in one box and installation is tool-less. Tetrix is available in 1.5 or 3 m
lengths with a pre-mounted mechanical coupling and through-wiring connector,
TL-D or TL5 lamps, reector, suspension bracket and snap-on nishing pieces. A
starter kit is required to start the light-line. Tetrix is supplied with a white in-laid
reector to cover most standard applications. Conventional and HF versions are
available. Dedicated 1.5 m trunkings can be equipped with emergency lighting.
Maintenance is carried out from below, enabling the system to be used as a
surface-mounted solution. The recommended maximum installation height is 6m.
www.philips.com/lighting
Philips indoor luminaires8.66
TTX150
Light-line systems
Tetrix
Type TTX150
Length 1 x or 2 x length of 58 W (581 or 582)
Light source Fluorescent
1 x or 2 x MASTER TL-D / G13 / 58 W
Lamp included Yes (lamp color 840)
Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
Electronic Included (EI)
Electronic Included, pre-heat (EI-PH)
Option Lamp; uorescent TL5
Separate switching of lamps in line (left/right) (DS),
in 2-lamp version only
Emergency lighting: 3 hours (EL3), in 581 versions
Pre-wired ribbon cable, 7-wire, 2.5 mm², (7x2.5)
Material Aluminum, white
Installation Suspended; pre-mounted mechanical coupling and
through-wiring connector
Accessory Reectors for electronic and conventional gear,
lamellae louver, acrylic cover (1500 mm)
Remarks Standard equipped with 5-wire, 2.5 mm² through-
wiring
Starter kit required to star t the light line
Suspension brackets and end caps are included in
packaging
Empty through-wiring units available (5x2.5)
Main applications Retail
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
86.3
170
TTX150
A
2
x 1530
2
x2x 3060
Tetrix TTX150 light-line with TL-D
uorescent lamp(s)
Preferred selection
Product ID Weight
(kg)
European Order
Code (EOC)
TTX150 581 1xTL-D58W IC 4.00 124834 00
TTX150 582 2x2xTL-D58W IC 9.50 124940 00
TTX150 582 2x2xTL-D58W HFB 6.20 124957 00
Please contact your local Philips representative for additional congurations
Accessories
Starter kit containing suspension
bracket, electrical connector and end
caps
Product ID EOC
ZTX150 MB-EC-2xEP 124445 99
Starter kit containing suspension
bracket, electrical connector (separate
switching functionality) and end caps
Product ID EOC
ZTX150 MB-2xEP EC-DS 125350 99
Philips indoor luminaires 8.67
TTX150
Light-line systems
Light-line systems
Loading...