Philips LWL2 Series, Lightolier LWL2 Series, Lightolier LWL2NURBSD2T Specification

LWL2 Series

VANDAL-RESISTANT WET/DAMP LOCATION LED EXIT

Page 1 of 2

LWL2NURBSD2T

8.85"

(22.48 cm)

4.5"

(11.43 cm)

13.8"

(35.26 cm)

4.5"

(11.43 cm)

2.4"

(6.1 cm)

Features

Illumination: Illumination

of the exit stencil face is

accomplished with long lasting,

high-output LEDs. Hot spots

and striations are eliminated

by the internal light chamber,

which is specially designed

around the high-performance

LED array. Average illumination

levels are in excess of 25fl

(79 cd/m2).

Housing: Die-cast aluminum

housing with premium impact-

resistant injection molded

polycarbonate covers. Housing

is powder coated and back

cover is molded in color to

match. Front cover is clear.

Stencil is provided with field

selectable chevrons and is

contained inside the fully

gasketed housing. All exposed

hardware is both vandal-

resistant and anti-corrosion

coated. Universal knockouts on

backplate allow wall mounting

directly to standard junction

boxes. Die-cast aluminum

canopy is provided for top/side

mounting and is powder coated

to match housing.

Operating Temperature

Range: Wet /D amp Loc ation

-40°F (-40°C) to 113°F (45°C)

Diagnostic Electronics

(standard): 120/277 VAC

dual voltage input with surge

protection is standard on all

AC models. For emergency

operation, the charging system

is microprocessor driven with

software embedded diagnostic

routine and temperature

compensation. 120/277 VAC

input, surge protection,

brownout , AC lockout and low

voltage disconnect features are

standard.

Self-Testing Diagnostics

(standard): The diagnostic/

charging platform with self-

testing mode automatically

runs a one-minute self-test

every 30 days and a 30-minute

test on the sixth and twelfth

month. A one-minute or

90-minute test may be initiated

via the push to test switch on

the unit or by activating the

appropriate test command on

the optional IR test device.

Job Information Type:

Job Name:

Cat. No.:

Notes:

Electrical Specifications:

AC Only Red:

3.8 W (120 VAC), PF 0.96

3.8 W (277 VAC), PF 0.91

AC Only Green:

4.0 W (120 VAC), PF 0.95

4.0 W (277 VAC), PF 0.90

Self-Powered Red:

4.7 W (120 VAC), PF 0.95

4.8 W (277 VAC), PF 0.97

Self-Powered Green:

4.7 W (120 VAC), PF 0.95

4.7 W (277 VAC), PF 0.99

Code Compliance

UL 924 and UL wet/damp

location listed. NFPA 101,

NEC, BOCA, OSHA and IBC

illumination standards. Meets

ADA specifications for wall

mounted lighting fixtures. IEC

61951-1 Life Testing (batteries).

Certified to the California

Energy Commission in

accordance with California law.

NEMA Premium certified.

Warranty

Five-year full electronics and

five-year full plus five-year

prorated battery warranty.

VANDAL-RESISTANT WET/DAMP LOCATION LED EXIT

Ordering Information

LWL 2

Series

LWL 2 = Wet/
Damp Location
LED Exit

Accessories (order as a separate item)
SDREMOTE = Infrared Remote Test Device
T15TPTOOL = Tamperproof Tool
TPKITB = Pendant Kit, 12” Stem, Black
TPKITW = Pendant Kit , 12” Stem, White

Note

1) Some options may impact UL listing. Consult factory for specifics.

2) Must specify “PM” option for compatibilit y with pendant kit.

Battery Type

A = AC Only
N = Nickel

Cadmium

Face Options

1 = Single
U = Universal

Single/Double
Face

Letter Color

R = Red
G = Green

Stencil Face/Housing Color

W = White Housing and White
Stencil
B = Black Housing and Black
Stencil
G = Gray Housing and Gray
Stencil
WA = White Housing and
Brushed Aluminum Stencil
BA = Black Housing and Brushed
Aluminum Stencil
GA = Gray Housing and Brushed
Aluminum Stencil

LWL2 Series

Page 2 of 2

Model Designator

Blank = AC Only
SD2T = Self-

Testing Diagnostic
Electronics
(required with
nickel cadmium
models)

Factory Installed Options

A = Audible Diagnostics
BF = Buzzer/Flasher (self- powered units only)
BZ = DC Buzzer
DC = 12-48 VDC Input (AC only models)
EX = Special Input Transformer (consult

1

factory)

FA = 24 VDC Fire A larm Interface
FL = Emergency Flasher (self-powered units

only)
PM = Pendant Mount Only (must order
pendant kit accessor y)

SW = Special Wording (consult factory)
2CKT1 = 120 VAC Two Circuit (AC only

models)
2CKT2 = 277 VAC Two Circuit (AC only
models)

2

Pendant Kit

2.4"

(6.1 cm)

5.5"

(13.97 cm)

8.85"

(22.48 cm)

13.8"

(35.26 cm)

Philips Lightolier
e: [e-mail]
t: [phone]
w: www.lightolier.com

LWL2 Series August 8, 2011

Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.

Job Information Type: