Philips LDS Series, Lightolier LDS Series Specification

LDS Series

DIE CAST ALUMINUM LED EXIT

Page 1 of 2

LDSNURW

12.75"

(32.38 cm)

13.38 "

(33.97 cm)

8.5"

(21.59 cm)

9.125"

(23.18 cm)

Features

Illumination: Illumination of

the stencil face is accomplished

with long-lasting, high-output

Light Emitting Diodes (LEDs).

Hot spots and striations are

eliminated by the internal “light

chamber” allowing for even

illumination in normal and

emergency situations.

Housing: Rugged die cast

aluminum housing, backplate,

faces and canopy. Exits are

painted with a durable powder

coat and available in a black

frame with brushed aluminum

stencil face, black frame with

black stencil face, or white

frame with white stencil face.

Operating Temperature

Range:

65°F (19°C) to 85°F (30°C)

Self-Testing Diagnostics

(optio nal) : The diagnostics

routine is activated upon the

presence of AC power to

ensure proper installation

and initialization. Continuous

monitoring of the systems

critical components include:

battery disconnect/failure,

charger failure, LED failure,

AC line voltage monitoring

and transfer circuit failure.

Fault/service monitoring is

accomplished via a dual color

LED on the outside of the unit

so there is no need to open

the fixture if trouble shooting

is needed. The self-test

routine satisfies the exception

clause for periodic testing

requirements of NFPA 101 and

automatically tests the unit for

one minute every thirty days

and 90 minutes annually.

Electrical Specifications:

AC Only Red and Green:

0.026 A (120 VAC)

0.012 A (277 VAC)

Self-Powered Red and Green:

0.033 A (120 VAC)

0.017 A (277 VAC)

Code Compliance

UL 924 listed. NFPA 101,

NEC, BOCA, OSHA and IBC

illumination standards.

Warranty

Five year full warranty.

2.0"

(5.08 cm)

Diagnostic Electronics

(standard): 120/277 VAC,

60 Hz, dual voltage input.

Solid state circuitry is surge-

protected and provides for

a reliable charging system.

Standard features include

low voltage disconnect, labor

saving AC lockout, brownout

protection and instantaneous

transfer.

Job Information Type:

Job Name:

Cat. No.:

Notes:

Ordering Information

LDS

Series

LDS = Die Cast
Aluminum LED Exit

Accessories (order a s a separate item)
PKIT12W
PKIT12B

Note

1) SD available on nickel cadmium models only and only as universal.

2) Custom pendant lengths and colors available, consult factory.

2

= Pendant Kit , 12” White Finish

2

= Pendant Kit , 12” Black Finish

Battery

A = AC Only
N = Self-Powered

U

Stencil Faces

U = Universal, 2 Faces
Backplate and Canopy

LDS Series

DIE CAST ALUMINUM LED EXIT

Page 2 of 2

Letter Color

R = Red
G = Green

Stencil Face /Housing Color

A = Natur al Brushed Aluminum
Face w/ Black Housing
B = Black Stencil Face w/ Black
Housing
W = White Stencil Face w/
White Housing

Factory Installed Options

SD = Self-Testing Diagnostics

1

Philips Lightolier
e: [e-mail]
t: [phone]
w: www.lightolier.com

LDS Series August 11, 2011

Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.

Job Information Type: