
Introduction
◗ With your new Philips Ladyshave you can
quickly, easily and comfortably remove
unwanted hair from dry or wet skin.
◗ The Ladyshave can be operated on batteries.
Important
◗ Do not use warmer water than shower
temperature 35ºC
Preparing the appliance use
The Ladyshave runs on two R6 AA 1.5 volt
batteries.
We strongly advise you to use Philips LR6
PowerLife batteries.They supply sufficient energy
for approx. 45 minutes of shaving.
1 Make sure that your hands and the
appliance are dry when you insert the
batteries.
C
2 Pull the upper part of the Ladyshave off
the lower part.
C
3 Insert the batteries into the battery
compartment.
Make sure you place the batteries in accordance
with the + and - indications.
4 Reattach the lower part of the appliance
to the upper part.
ENGLISH6

◗ To avoid damage due to battery leakage:
B
Do not expose the Ladyshave to direct sunlight.
B
Do not expose the appliance to temperatures
higher than 35cC.
B
Remove the batteries if the appliance is not going
to be used for a month or more.
B
Do not leave empty batteries in the appliance.
Using the appliance
C
1 Switch the Ladyshave on.
2 Place the shaving head on the skin and
move it slowly against the direction of the
hair growth.
C
◗ The Ladyshave is suitable for shaving the
underarms.
C
◗ The Ladyshave is suitable for shaving the bikini
line.
C
◗ The Ladyshave is suitable for shaving the legs.
ENGLISH 7