Philips Lytemode 6-Button Remote Station, ILS-CL-6RES User Manual

Lightolier Controls

2828 Trade Center Drive, Suite 130B

Carrollton, TX 75007

[phone] (In the United States and Canada)

214-647-7880

Fax: [phone]

www.lolcontrols.com

Lilghtolier Controls is a Philips Controls brand.

This manual is for informational use only and is subject to change without notice.

Lightolier Controls assumes no responsibility or liability for any claims resulting

from errors or inaccuracies that may appear in this manual.

Version as of: December 2005

Document: P/N: 85-6340A0

Lytemode 6-Button Remote Station User’s Guide

© Philips Controls. All Rights Reserved.

THREE YEAR LIMITED WARRANTY

The Philips Controls product, when properly installed and under normal conditions of use
(without overload, abuse or alteration), is warranted to you, the original user, for a peri­od of three years form the date of original retail purchase, to be free from defects in mate­rials and workmanship. If during the warranty period you believe the purchased product
or any part thereof has such a defect, you must return the product (or part) at your cost
during such period, with proof of purchase (or if installed by a third-party a written expla­nation of installation transaction with proof of date), to Philips Controls, 2828 Trade
Center Dr. Ste. 130B, Carrollton, TX 75007, for repair or replacement (or to an author­ized Philips Controls supplier which agrees in advance to handle the return and replace­ment by factory authorization). If the product or part is found by Philips Controls to have
been defective in material or workmanship it will be repaired or replaced (as deemed nec­essary by Philips Controls), and the replacement will be returned to you free of charge.
The original user is solely responsible for any costs associated with removal and
re-installation of the product and shipping to Philips Controls or its authorized supplier.
PHILIPS CONTROLS LIMITS THE DURATION OF THE IMPLIED WARRANTY OF
MERCHANTABILITY WITH RESPECT TO THE PRODUCT TO THE LIMITED
WARRANTY PERIOD SET FORTH ABOVE, AND OTHERWISE DISCLAIMS ALL
IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT AND ITS PARTS.
Some states disallow certain limitations on implied warranties so you should consult your
state law if you have a questions regarding this limitation and disclaimer. Philips Controls
disclaims any and all liability for incidental, consequential, special or indirect damage
arising out of any claimed breach of warranty or otherwise. However, some states do not
allow exclusion or limitation of such damages, so this disclaimer may not apply to you.
The remedy provided in the Limited Warranty for defective products is the user’s sole and
exclusive remedy, subject to your state law. Further, this Warranty gives the user specif­ic legal rights, and the user may also have other rights which may vary from state to state.
If you believe warranty claim is warranted, you may contact your nearest authorized
Philips Controls supplier. If one does not exist in your area, please contact Philips
Controls Customer Service at the above address (or at 1-800-526-2731), or please visit us
at www.lolcontrols.com.

6-Button Remote Station User’s Guide 1

Table of Contents

Customer Service .....................................................................2

Lytemode System Overview .........

..........................................3

Quick Start .

..............................................................................4

6-Button Remote Station Overview ........................................5

Installation ...............................................................................6

Setting ILS Network ID ...........................................................7

Basic Setup ..............................................................................9

Mode .................................................................................9

ID Address ......................................................................11

IR Address ......................................................................13

LED Intensity .................................................................13

Display Version ..............................................................14

Operation ...............................................................................15

Selecting a Scene ............................................................15

Changing Channel Levels ..............................................16

Remote Keypad Functions .............................................16

Factory Defaults and Troubleshooting ..................................17

Resetting Factory Defaults .............................................17

Troubleshooting ..............................................................18

Installing Custom Buttons .....................................................19

Specifications ........................................................................20

Accessories ............................................................................20

2 Customer Service

Customer Service

Technical and Sales assistance for Lytemode products are
available worldwide.

Phone: [phone] (In the United States and Canada)

[phone] (Worldwide)

6-Button Remote Station User’s Guide 3

Lytemode System Overview

The Lytemode System is designed to control architectural
lighting by distributing both power and intelligence. The system
provides processing power and control at each respective Master or
Remote Station, eliminating the need for a central processor.
Lytemode Master Stations provide individual control for up to 16
channels, 13 scenes plus “Off”, and adjustable fade times. Multiple
Master Stations may be linked together for control of up to 128
Channels and 13 preset scenes. By combining Lytemode Master
Stations with Lytemode Remote Stations, the system provides
remote access to scenes, Master Raise/Lower control, Multi-room
partition control, or Master Station Lockout. Lytemode Master
Stations are easily programmed using the front panel buttons,
without removing the Master Station from the wall, and without the
need for a computer. Lytemode Master Stations are compatible with
both Lightolier

Controls Insulated Gate Bipolar Transistor
(IGBT) Dimming Cabinets as well as Silicon Controlled Rectifier
(SCR) Dimming Panels.

Lytemode products are controlled by the Intelligent Lytemode
System (ILS) protocol. All Lytemode control devices must be
connected to the ILS system and given a unique ID (or address) in
order to interact properly. The ID identifies the device on the
network and allows the device to avoid network collisions when
transmitting data.

4 Quick Start

Quick Start

To get the 6-Button Remote Station up and running quickly, use the
following checklist:

Step 1. Install unit (refer to “Installation” on page 6).

Step 2. Connect to Lytemode ILS Network (refer to “Setting ILS

Network ID” on page 7).

Step 3. Set the mode (refer to “Mode” on page 9).

The unit should now be ready for operation.

Notes:

• If the unit was set up as a Remote, then a Lytemode Master
must be set to the same ID for the unit to function properly.

• If the unit was set up as a Global Remote, then a Lytemode
Master must be set up to allow Global Remotes - matching
the unit’s ID - in order function properly.

6-Button Remote Station User’s Guide 5

6-Button Remote Station Overview

The Lytemode 6-Button Remote Station (ILS-CL-6RES) can be
used to trigger Scenes and perform Master Raise/Lower, or act as a
remote keypad for any specified ILS Master Station. It can be
programmed to control multiple Master Stations, if required.

The following diagram provides an overview of the 6-Button
Remote Station controls:

* Optional CLMIRTES Infra-Red Handheld Remote sold separately.

A

B

D

C

ON

OFF

ON Button - Pressing
ON will fade lights to
the stored preset level.

A, B, C and D Scenes ­Pressing any Scene
button wi

ll fade lights to

the stored preset level.

All Raise/Lower Buttons - Pressing will increase or decrease
all channel levels, respectively. This can be done at any time
and will not affect the stored levels.

OFF Button ­Pressing OFF
fades lights out.

InfraRed Receiver ­Allows control by
handheld remote.*

Note: Channel levels and fade rates for ON,
OFF and Scenes A-D are stored at the
corresponding ILS Master Station.