Philips ID555 User Manual

Call from the phonebook

1. Press d in idle mode.

2. Scroll

: to a phonebook entry.

3. Press

r or v key.

The call is initiated.

Listen to messages recorded on the answering machine

Press o on the base station to turn on the answering machine (the

message counter is turned on).

Press

o again to turn off the answering machine (the message counter

is turned off).

Press

P on the base station to play phone messages (the first

recorded message will be played first).

Press

R to skip the current message and play the next message.
l once to replay current message.

Press

l twice to go back to the previous message.

Press

-+ to adjust speaker volume during message playback.

Press

x to delete the current message.

Press

Refer to your new phone's User Manual for details about the answering

machine function.

Troubleshooting

For more information, please refer to the User Manual that came
with your phone.

Problem Solution

• There’s no dialling
tone!

• Caller cannot hear me
clearly!

•

SEARCHING... is

displayed on handset

and icon is blinking!

• Caller number is not
displayed!

• Check the connections

• Charge the batteries

• Use the line cable provided

• Move closer to the base station

• Move the base station at least one metre
away from any electrical appliances

• Move closer to the base station

• Reset your unit and restart the handset
registration

• Check your subscription with your
network operator

Welcome to Philips!

Register your product and get support at
www.philips.com/welcome

Need help?

User Manual

Refer to the User Manual that came with your new phone.

Online help

www.philips.com/support

©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner.

Document number: 3111 285 48901 (GB) Printed in China

Register your product and get support at
www.philips.com/welcome

Quick start guide

Connect

1

Install

2

Enjoy

3

ID555

What’s in the box

Handset Base station

rechargeable battery

*You may find in the box the line adaptor delivered separately from the line
cable. In this case, you have to connect the line adaptor to the line cord

first before plugging the line cord to the line socket.

In multihandset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.

WARNING Always use the cables and batteries that came with your phone.

Power supply1 Li-ion

GuaranteeUser manual

Battery door

Line cord*

Quick Start Guide

Connect

1

Connect the base station

1. Place the base station in a central location near the telephone line socket
and electricity socket.

2. Connect the line cord and the power cable to their corresponding
connectors at the back of the base station.

3. Connect the other end of the line cord and power cable to their
respective sockets.

Install

22

Insert rechargeable batteries and charge

Insert batteries Charge handset for 24 hours

A

Configure your phone (if necessary)

After installing the batteries and charging your phone for a few minutes, your
phone displays a Welcome message in various languages:

mSELECT.

1. Press

2. Scroll

: to your country and the associated language.

3. Press

mSELECT to confirm your selection.

Your phone is now ready for use.

B

Enjoy

3

Make a call

Dial the number (maximum 24 digits) and press r or v key.
OR
Press

r or v key to take the line and dial the number (maximum 24

digits).

Answer a call

When the phone rings, press r or v key.

End a call

To end a conversation, press e key.

Adjust the earpiece or speaker’s volume

During a call, press : to select from VOLUME 1, VOLUME 2 or

VOLUME 3.

Set the ring melody

1. Press M in idle mode, scroll : to PERSONAL SET and press

mSELECT, scroll : to HANDSET TONES and press
mSELECT, scroll : to RING TONES and press mSELECT.

: to your desired melody.

2. Scroll

mSELECT to set the ring melody.

3. Press
A validation tone is emitted and the screen returns to previous menu.

Store a contact in the phonebook

1. Press M key in idle mode, scroll : to PHONEBOOK and press

mSELECT, press mSELECT to enter NEW ENTRY.

2. ENTER NAME is displayed on the screen.

3. Enter the name of the contact (maximum 14 characters) and press

mOK.

4. Enter the phone number (maximum 24 digits) and press
A validation tone is emitted.

Access the phonebook

1. Press d in idle mode and scroll : to browse the phonebook.

2. To view the details, press

mSELECT.

mOK.