Philips HX 4511 Service Manual

Sonic toothbrush
HX4511
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
- Smartimer
- Easy-start
The brushing power will gently increase to full power over the first 12 brushings. The Easy-start feature is active if you hear 2 beeps immediately after turning on your toothbrush. Once you reach the optimal brushing power, after the 12th brushing, you will no longer hear the double beeping at the beginning of your brushing routine.
- Extra-soft bristles
Extra-soft, rounded bristles ensure deep, yet gentle cleaning.
- Ergonomic non-slip grip
Safety information
- This product meets the requirements regarding interference suppression on radio and TV.
- After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage : 110 - 120V, 230 - 240V, 50 - 60 Hz
- Power consumption : 110 - 120 V 1.5 Watts, 230 - 240 V 3 Watts
- Speed (Top) : Approximately 31,000 brush strokes per minute
- Charging time : Empty to full : 15 hours
- Operating time : Full to empty : 40 minutes
- Battery type : NiCd
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- No specific issues
OPTIONAL (accessories)
- No specific issues
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
04/04
REPAIR INSTRUCTION
- Handle toothbrush (3)
The batteries inside cannot be replaced. In case of a defect, the complete unit must be replaced.
- Charging unit (2)
In case of a defective charging unit or cordset, the complete charging unit must be replaced.
- Charging the handle (3)
The handle should be charged for at least 24 hours during the first few days of use.
NOTES
For standardisation reasons, the handle of the HX4511 is replaced by the handle of the HX4573. This handle has 2 extra features: the Quadpacer and the Battery charge indicator.
Environment
1. When discarding the appliance, remove the built-in rechargeable battery.
The battery should be completely empty of charge.
2. Remove the brush head from the handle.
3. See figures 1 - 6
HX4511
1
4 5
2 3
6
= changed
2-3
Loading...
+ 1 hidden pages