Philips Hue E27 White Smart Bulb With Bluetooth - 2 Pack User guide

Product Informaon Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources

Supplier's name or trade mark: PHILIPS

Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL

Model idenfier: 9290018216

Type of light source:

Lighng technology used: LED Non-direconal or

NDLS

direconal:

Light source cap-type

E27

(or other electric interface)
Mains or non-mains: MLS Connected light

Yes

source (CLS):
Colour-tuneable light source: No Envelope: ­High luminance light source: No
An-glare shield: No Dimmable: Only with

specific dimmers

Product parameters

Parameter Value Parameter Value

General product parameters:

Energy consumpon in on­mode (kWh/1000 h), rounded

9 Energy efficiency

class

F

up to the nearest integer
Useful luminous flux (ɸuse),

indicang if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)

806 in

Sphere (360°)

Correlated colour

temperature,

rounded to the

nearest 100 K,

or the range of

2 700

correlated colour

temperatures,

rounded to the

nearest 100 K, that

can be set
On-mode power (Pon),

expressed in W

9,0 Standby power (Psb),

expressed in W

0,00

and rounded to the

second decimal
Networked standby power (P

for CLS, expressed in W and
rounded to the second decimal

net

)

0,41 Colour rendering

80
index, rounded to
the nearest integer,
or the range of CRI­values that can be
set

dimensions

Height 61Outer
Width 110

Spectral power
distribuon in the

See image

in last page

Page 1 / 3

without
separate

Depth 110

range 250 nm to 800
nm, at full-load

control gear,
lighng
control parts
and non­lighng
control parts,
if any
(millimetre)

Claim of equivalent power

(a)

Yes If yes, equivalent

60
power (W)

Chromacity

0,458

coordinates (x and y)

Parameters for LED and OLED light sources:

R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,96

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1) 0,70 Colour consistency

6

in McAdam ellipses

Claims that an LED light
source replaces a fluorescent
light source without integrated

(b)

-

If yes then

­replacement claim
(W)

ballast of a parcular waage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect

0,4

metric (SVM)

(a)

'-' : not applicable;

(b)

'-' : not applicable;

Page 2 / 3

Page 3 / 3