Philips Hue B22 White Smart Bulb With Bluetooth User guide

Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light sources
Supplier's name or trade mark: PHILIPS
Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL
Model identifier: 9290024685
Type of light source:
Lighting technology used: LED Non-directional or
Light source cap-type
(or other electric interface) Mains or non-mains: MLS Connected light
Colour-tuneable light source: No Envelope: ­High luminance light source: No Anti-glare shield: No Dimmable: Only with
Parameter Value Parameter Value
General product parameters:
Energy consumption in on­mode (kWh/1000 h), rounded up to the nearest integer
Useful luminous flux (ɸuse), indicating if it refers to the flux in a sphere (360º), in a wide cone (120º) or in a narrow cone (90º)
On-mode power (Pon), expressed in W
Networked standby power (P for CLS, expressed in W and rounded to the second decimal
Height 109Outer
dimensions
Width 60
net
)
B22
source (CLS):
Product parameters
8 Energy efficiency
class
806 in
Sphere (360°)
8,0 Standby power (Psb),
0,50 Colour rendering
Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set
expressed in W and rounded to the second decimal
index, rounded to the nearest integer, or the range of CRI­values that can be set
Spectral power distribution in the
NDLS
Yes
specific dimmers
F
2200...6500
0,00
80
See image
in last page
Page 1 / 3
without separate
Depth 60
range 250 nm to 800
nm, at full-load control gear, lighting control parts and non­lighting control parts, if any (millimetre)
Claim of equivalent power
(a)
Yes If yes, equivalent
60
power (W) Chromaticity
0,458
coordinates (x and y)
Parameters for LED and OLED light sources:
R9 colour rendering index value 0 Survival factor 0,90 the lumen maintenance factor 0,96
Parameters for LED and OLED mains light sources:
displacement factor (cos φ1) 0,70 Colour consistency
6
in McAdam ellipses Claims that an LED light
source replaces a fluorescent light source without integrated
(b)
-
If yes then
­replacement claim (W)
ballast of a particular wattage. Flicker metric (Pst LM) 1,0 Stroboscopic effect
0,4
metric (SVM)
(a)
'-' : not applicable;
(b)
'-' : not applicable;
Page 2 / 3
Page 3 / 3
Loading...