Philips Hue B22 White Smart Bulb With Bluetooth User guide

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources

Supplier's name or trade mark: PHILIPS

Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL

Model identifier: 9290023350

Type of light source:

Lighting technology used: LED Non-directional or

NDLS

directional:

Light source cap-type

B22

(or other electric interface)
Mains or non-mains: MLS Connected light

Yes

source (CLS):
Colour-tuneable light source: No Envelope: ­High luminance light source: No
Anti-glare shield: No Dimmable: Only with

specific dimmers

Product parameters

Parameter Value Parameter Value

General product parameters:

Energy consumption in on­mode (kWh/1000 h), rounded

16 Energy efficiency

class

F

up to the nearest integer
Useful luminous flux (ɸuse),

indicating if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)

1 600 in

Sphere (360°)

Correlated colour

temperature,

rounded to the

nearest 100 K,

or the range of

2 700

correlated colour

temperatures,

rounded to the

nearest 100 K, that

can be set
On-mode power (Pon),

expressed in W

15,5 Standby power (Psb),

expressed in W

0,00

and rounded to the

second decimal
Networked standby power (P

for CLS, expressed in W and
rounded to the second decimal

net

)

0,50 Colour rendering

80
index, rounded to
the nearest integer,
or the range of CRI­values that can be
set

dimensions

Height 130Outer
Width 67

Spectral power
distribution in the

See image

in last page

Page 1 / 3

without
separate

Depth 67

range 250 nm to 800
nm, at full-load

control gear,
lighting
control parts
and non­lighting
control parts,
if any
(millimetre)

Claim of equivalent power

(a)

Yes If yes, equivalent

100

power (W)

Chromaticity

0,458

coordinates (x and y)

Parameters for LED and OLED light sources:

R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,96

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1) 0,70 Colour consistency

6

in McAdam ellipses

Claims that an LED light
source replaces a fluorescent
light source without integrated

(b)

-

If yes then

­replacement claim
(W)

ballast of a particular wattage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect

0,0

metric (SVM)

(a)

'-' : not applicable;

(b)

'-' : not applicable;

Page 2 / 3

Page 3 / 3