
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources
Supplier's name or trade mark: PHILIPS
Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL
Model identifier: 9290024693
Type of light source:
Lighting technology used: LED Non-directional or
NDLS
directional:
Light source cap-type
B22
(or other electric interface)
Mains or non-mains: MLS Connected light
Yes
source (CLS):
Colour-tuneable light source: No Envelope: High luminance light source: No
Anti-glare shield: No Dimmable: Only with
specific dimmers
Product parameters
Parameter Value Parameter Value
General product parameters:
Energy consumption in onmode (kWh/1000 h), rounded
10 Energy efficiency
class
F
up to the nearest integer
Useful luminous flux (ɸuse),
indicating if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)
1 055 in
Sphere (360°)
Correlated colour
temperature,
rounded to the
nearest 100 K,
or the range of
2 700
correlated colour
temperatures,
rounded to the
nearest 100 K, that
can be set
On-mode power (Pon),
expressed in W
9,5 Standby power (Psb),
expressed in W
0,00
and rounded to the
second decimal
Networked standby power (P
for CLS, expressed in W and
rounded to the second decimal
net
)
0,43 Colour rendering
80
index, rounded to
the nearest integer,
or the range of CRIvalues that can be
set
dimensions
Height 61Outer
Width 110
Spectral power
distribution in the
See image
in last page
Page 1 / 3
without
separate
Depth 110
range 250 nm to 800
nm, at full-load
control gear,
lighting
control parts
and nonlighting
control parts,
if any
(millimetre)
Claim of equivalent power
(a)
Yes If yes, equivalent
75
power (W)
Chromaticity
0,458
coordinates (x and y)
Parameters for LED and OLED light sources:
R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,96
Parameters for LED and OLED mains light sources:
displacement factor (cos φ1) 0,70 Colour consistency
6
in McAdam ellipses
Claims that an LED light
source replaces a fluorescent
light source without integrated
(b)
-
If yes then
replacement claim
(W)
ballast of a particular wattage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect
0,4
metric (SVM)
(a)
'-' : not applicable;
(b)
'-' : not applicable;
Page 2 / 3
Page 3 / 3