Philips HTS7200/51 User guide
Register your product and get support at
www.philips.com/welcome
HTS7200
EN User manual
Contents
1 Important 2
Safety and important notice 2
Trademark notice 3
Care 4
2 Your product 5
Feature highlights 5
Product overview 6
6 Adjust sound 29
Control the volume 29
Change treble and bass 29
Select surround sound 29
Select preset sound 29
7 Adjust settings 30
Video Setup 30
Audio Setup 31
Preference Setup 32
EasyLink Setup 33
Advanced Setup 34
English
3 Connect 9
Place the product 9
Connect video cables 9
Connect speaker cables to speakers 11
Connect speakers and subwoofer 11
Connect radio antenna 12
Connect audio cables/other devices 12
Connect LAN 15
Connect power cord 15
4 Get started 16
Insert the remote control batteries 16
Find the correct viewing channel 16
Use the Home menu 17
Select menu display language 17
Set up network 17
Use Philips EasyLink 18
8 Update software 36
Update software via network 36
Update software via USB 36
9 Speci cations 37
10 Troubleshooting
11 Glossary
38
40
5 Play 20
Play a disc 20
Play video 21
Play music 24
Play photo 25
Play from USB device 26
Play from portable media player 27
Play from radio 27
EN
1
1 Important
Copyright
Safety and important notice
Warning
Risk of overheating! Never install the product •
in a con ned space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure cur tains or other objects
never cover the ventilation slots on the
product.
•
Never place the product, remote control or
batteries near naked ames or other heat
sources, including direct sunlight.
•
Only use this product indoors. Keep this
product away from water, moisture and liquid lled objects.
•
Never place this product on other electrical
equipment.
Keep away from this product during lightning
•
storms.
Where the mains plug or an appliance
•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Visible and invisible laser radiation when open.
Avoid exposure to beam.
The making of unauthorized copies of
copy-protected material, including computer
programmes, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Macrovision copyright
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual proper ty rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage), 2004/108/EC (EMC).
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
2
EN
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
DivX, DivX Ultra Certi ed, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Of cial DivX® Ultra Certi ed product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media les and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
English
Trademark notice
HDMI, and HDMI logo and High-De nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are
trademarks.
Manufactured under licence from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535; & other U.S. and worldwide
patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTSHD and DTS-HD Advanced Digital Out are
trademarks of DTS, Inc. © 1996-2008 DTS,
Inc. All Rights Reserved.
EN
3
Java and all other Java trademarks and logos
are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States
and/or other countries.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks
of Blu-ray Disc Association.
‘AVCHD’ and ‘AVCHD’ logo are trademarks
of Matsushita Electric Industrial Co., Ltd and
Sony Corporation.
Care
Caution
Never use solvents such as benzene, thinner, •
cleaners available commercially, or anti-static
sprays intended for discs.
Clean discs
Wipe the disc with a micro bre cleaning cloth
from the centre to the edge in a straight line
movement.
‘x.v.Colour’ is a trademark of Sony
Corporation.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
LASER RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
4
EN
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully bene t from the
support that Philips offers, register your product
at www.philips.com/welcome.
Feature highlights
BD-Live
Connect this product to the movie studios
website via the LAN port to access a variety
of up-to-date content (e.g. refreshed previews
and exclusive special features). You can also
enjoy next generation possibilities, such as
ringtone/wallpaper downloads, peer-to-peer
interactions, live events and gaming activities.
Region codes
English
Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100% •
interoperability with all HDMI CEC devices.
High-De nition entertainment
Watch high-de nition content disc with
HDTV (High De nition Television). Connect
it through a high speed HDMI cable (1.3 or
category 2). You can enjoy excellent picture
quality up to 1080p resolution with the frame
rate of 24 frames per second with progressive
scan output.
You can play discs with the following region
codes.
Region code Country
DVD BD
Europe,
United
Kingdom
B
Asia Paci c,
Taiwan, Korea
A
Latin America
A
Australia,
New Zealand,
B
Russia, India
BONUSVIEW/PIP (Picture-in-Picture)
This is a new function of BD-Video that
plays the primary video and secondary video
simultaneously. Blu-ray players with Final
Standard Pro le or Pro le 1.1 specs can play
Bonus View features.
C
C
China
EN
5
Product overview
Main unit
h IR sensor
Detect signals from the remote control.
Point the remote control directly at the
sensor.
ab
cdefg
ijk
a ( Standby-On )
Turn on the Home Theater System or
switch to standby mode.
b SOURCE
Select a media to play or listen to audio
from the connected device.
h
i Disc compartment
j MP3 LINK jack
Connect a por table audio player.
k
USB jack
Connect a USB supported device.
c VOL +/-
Increase or decrease volume.
d
e
f
g Display panel
( Stop )
Stop play.•
Press and hold to erase the preset •
radio station.
( Play/Pause )
Start, pause or resume play.•
In radio mode, automatically tune •
radio stations during rst-time setup.
( Open/Close )
Open or close the disc compar tment.
6
EN
Remote control
|
{
z
y
x
w
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
c Source buttons
• DISC / POP-UP MENU : Switch to
disc source. Access to disc menu
during play.
• RADIO : Switch to FM radio.
• USB : Switch to the connected USB
device.
• AUDIO SOURCE : Select an audio
input.
Display Device connected to
AUX1 AUDIO IN-AUX1
AUX2 AUDIO IN-AUX2
COAX IN DIGITAL IN-COAXIAL
OPTI IN DIGITAL IN-OPTICAL
MP3 LINK MP3 LINK
d Color buttons
Blu-ray discs only: Select a task or option.
e
( Home menu )
Access the home menu.
English
v
u
t
a ( Standby-On )
Turn on or switch the home theater •
to standby mode.
When EasyLink is enabled, press •
and hold for at least three seconds
to turn all connected HDMI CEC
compliant devices to standby.
b
OPEN/CLOSE
Open or close the disc compar tment.
p
q
r
s
f
g
h OK
i
j
k
l
OPTIONS
Access options for the current activity or
selection.
( Navigation buttons )
Navigate menus.
Con rm an entry or selection.
INFO
Display information about what is playing.
( Play )
Start or resume play.
( Pause )
Pause play.•
Move the paused picture one step •
forward.
( Stop )
Stop play.•
Press and hold to erase the preset •
radio station.
EN
7
m ( Mute )
Mute or restore audio output.
n TREBLE / BASS
Change treble or bass. Use with
o SOUND MODE
Select a sound mode.
p Numeric buttons
Select an item or setting.
q SUBTITLE
Select a subtitle language for video.
r REPEAT / PROGRAM
Toggle between various repeat or •
shuf e modes.
In radio mode, press to start manual •
radio preset; press and hold to start
automatic radio preset.
s HDMI
Select the video resolution of HDMI
output from the home theater.
+/- .
x SURR. SOUND
Switch audio output to multi-channel •
surround or stereo mode.
For HTS7200 only: Switch audio •
output to DOLBY Virtual speaker or
Stereo mode.
y
/ ( Previous/Next )
In video mode, skip to previous or •
next title, chapter or track.
In radio mode, select a preset radio •
station.
z
/ ( Fast Backward / Fast Forward )
Fast backward or fast forward. Press
repeatedly to change the search speed.
{
BACK
Return to a previous menu screen.
| TOP MENU
Access the main menu of a video disc.
t BONUS VIEW
Blu-ray discs only: Enable or disable the
Bonus View/Picture-In-Picture feature.
u AUDIO SYNC
Synchronize audio with video. Use with
+/- .
v AUDIO
In video mode, toggle between audio •
languages.
In radio mode, toggle between •
stereo and mono.
w
+/- ( Volume +/- )
Increase or decrease volume.
8
EN
3 Connect
Make the following connections to use your
Home Theater System. For a comprehensive
interactive guide, see www.connectivityguide.
philips.com.
FRONT
LEFT
English
FRONT
RIGHT
SUBWOOFER
Basic connections:
Video•
Speakers and subwoofer•
Power•
Optional connections:
Radio antenna•
Audio•
Audio from TV•
Audio from cable box/recorder/•
game console
Other devices•
Portable media player•
USB device•
LAN (Network)•
Note
Refer to the type plate at the back or bottom •
of the product for identi cation and supply
ratings.
•
Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
Place the product
Place the product where it cannot be •
pushed, pulled over or knocked down.
Do not place it in an enclosed cabinet.
Be sure that you have full access to the •
power cord for easy disconnection of the
product from the power supply.
1 Place the home theater near your TV.
2 Place the speakers system at normal
listening height and parallel to your
listening area.
3 Place the subwoofer in the corner of the
room or at least 1 meter/3 feet away
from your TV.
Tip
To reduce interference or noise, place the •
home theater away from radiation devices.
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the HDMI jack (for •
a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component •
video jacks (for a standard TV or
Progressive Scan TV).
Option 3: Connect to the video (CVBS) •
jack (for a standard TV).
Note
You must connect this Home Theater System •
directly to a TV.
EN
9
Option 1: Connect to the HDMI jack
HDMI OUT
Option 2: Connect to the component
video jack
HDMI IN
1 Connect the HDMI cable to the HDMI
OUT jack on this Home Theater System
and the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via •
an HDMI/DVI adaptor. Connect an audio cable
for sound output.
•
You can optimize the video output. Press
HDMI repeatedly to select the best resolution
the TV can support.
•
To play back the digital video images of a BDvideo or DVD-video via an HDMI connection,
it is necessary that both the Home Theater
System and the display device support a
copyright protection system called HDCP
(high-bandwidth digital content protection
system).
•
This type of connection provides best picture
quality.
PbPr Y
PbPr Y
1 Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
Note
The component video input jack on the TV •
might be labeled as Y Pb Pr , Y Cb Cr or YUV .
•
This type of connection provides good picture
quality.
10
EN
Option 3: Connect to the Video
(CVBS) jack
VIDEO
VIDEO OUT
VIDEO IN
1 Connect a composite video cable (not
supplied) to the VIDEO jack on this
Home Theater System and the VIDEO
input jack on the TV.
Connect speakers and
subwoofer
English
Note
The video input jack on the TV might be •
labeled as A/V IN , VIDEO IN , COMPOSITE
or BASEBAND .
•
This type of connection provides standard
picture quality.
Connect speaker cables to
speakers
1 Connect the speakers and subwoofer to
the matching jacks on this Home Theater
System.
Note
Ensure that the colors of the plugs and jacks •
are matched.
1 Match the color of the cable to the
terminal tab.
2 Press the terminal tab down and insert
the stripped end of the speaker cable,
then release.
EN
11
Connect radio antenna
FM (75 Ω)
ANTENNA
1 Connect the FM antenna to the FM75
jack on this Home Theater System
(for some models, this cable is already
connected).
Connect audio from TV
(also used for EasyLink control)
AUX 1
AUDIO IN
2 Extend the FM antenna and x its ends to
the wall.
Tip
For better FM stereo reception, connect to an •
external FM antenna.
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theater System to enjoy audio play with
multi-channel surround capabilities.
AUDIO OUT
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on this
Home Theater System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the
display panel.
12
EN
Connect audio from a cable box,
recorder or games console
Connect to coaxial jack
You can choose to connect to analog or digital
jacks depending on the device capabilities.
Connect to analog jacks
AUX 2
AUDIO IN
English
COAXIAL
DIGITAL IN
COAXIAL
DIGITAL OUT
1 Connect a coaxial cable (not supplied)
to the DIGITAL-IN-COAXIAL jack
on this Home Theater System and the
COAXIAL/DIGITAL output jack on the
device.
AUDIO OUT
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 jacks on this
Home Theater System and the AUDIO
output jacks on the device.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘AUX2’ is displayed on the
display panel.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘COAX IN’ is displayed on the
display panel.
Connect to optical jack
OPTICAL
DIGITAL IN
OPTICAL
DIGITAL OUT
EN
13
Loading...