Page 1
Register your product and get support at
www.philips.com/welcome
HTS7200
EN User manual
DE Benutzerhandbuch
ES Manual del usuario
FR Mode d’emploi
NL Gebruiksaanwijzing
Page 2
2
Page 3
Page 4
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
Care 6
2 Your product 7
Feature highlights 7
Product overview 8
7 Adjust settings 31
Video Setup 31
Audio Setup 32
Preference Setup 33
EasyLink Setup 34
Advanced Setup 35
8 Update software 37
Update software via network 37
Update software via USB 37
9 Specifi cations 38
English
3 Connect 11
Place the product 11
Connect video cables 11
Connect speaker cables to speakers 13
Connect speakers and subwoofer 13
Connect radio antenna 13
Connect audio cables/other devices 14
Connect LAN 16
Connect power cord 16
4 Get started 17
Insert the remote control batteries 17
Find the correct viewing channel 17
Use the Home menu 18
Select menu display language 18
Set up network 18
Use Philips EasyLink 19
5 Play 21
Play a disc 21
Play video 22
Play music 25
Play photo 26
Play from USB device 27
Play from portable media player 28
Play from radio 28
10 Troubleshooting 39
11 Glossary 41
6 Adjust sound 30
Control the volume 30
Change treble and bass 30
Select surround sound 30
Select preset sound 30
EN
3
Page 5
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product •
in a confi ned space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
Never place the product, remote control or
•
batteries near naked fl ames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this
•
product away from water, moisture and liquidfi lled objects.
Never place this product on other electrical
•
equipment.
•
Keep away from this product during lightning
storms.
Where the mains plug or an appliance
•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Visible and invisible laser radiation when open.
•
Avoid exposure to beam.
Copyright
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorised
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorised by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Copyright in the U.K.
Recording and playback of material may
require consent. See Copyright Act 1956 and
The Performers’ Protection Acts 1958 to
1972.
Mains fuse (UK only)
This product is in compliance with the
essential requirements and other relevant
provisions of Directives 2006/95/EC (Low
Voltage) and 2004/108/EC (EMC).
This product is fi tted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refi t the fuse cover.
Note
To conform to the EMC directive (2004/108/•
EC), the mains plug on this product must not
be detached from the mains cord.
4
EN
Page 6
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
Trademark notice
English
HDMI, and HDMI logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
DivX, DivX Ultra Certifi ed, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Offi cial DivX® Ultra Certifi ed product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media fi les and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
‘Blu-ray Disc’ and the ‘Blu-ray Disc’ logo are
trademarks.
EN
5
Page 7
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent
#s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535; & other U.S. and worldwide
patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTSHD and DTS-HD Advanced Digital Out are
trademarks of DTS, Inc. © 1996-2008 DTS,
Inc. All Rights Reserved.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. trademarks.
LASER RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Care
Caution
Never use solvents such as benzene, thinner, •
cleaners available commercially or anti-static
sprays intended for discs.
Java and all other Java trademarks and logos
are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States
and/or other countries.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks
of the Blu-ray Disc Association.
‘AVCHD’ and the ‘AVCHD’ logo are
trademarks of Matsushita Electric Industrial
Co., Ltd and Sony Corporation.
‘x.v.Colour’ is a trademark of Sony
Corporation.
Clean discs
Wipe the disc with a micro fi bre cleaning cloth
from the centre to the edge in a straight line
movement.
6
EN
Page 8
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers; register your product
at www.philips.com/welcome.
Feature highlights
BD-Live
Connect this product to the movie studios’
website via the LAN port to access a variety
of up-to-date content (e.g. refreshed previews
and exclusive special features). You can also
enjoy next generation possibilities, such as
ringtone/wallpaper downloads, peer-to-peer
interactions, live events and gaming activities.
Region codes
English
Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100% •
interoperability with all HDMI CEC devices.
High-Defi nition entertainment
Watch a high-defi nition content disc with
HDTV (High Defi nition Television). Connect
it through a high speed HDMI cable (1.3 or
category 2). You can enjoy excellent picture
quality up to 1080p resolution with the frame
rate of 24 frames per second with progressive
scan output.
You can play discs with the following region
codes.
Region
code
DVD BD
B
Country
Europe,
United
Kingdom
Asia Pacifi c,
Taiwan, Korea
A
Latin America
A
Australia,
New Zealand,
B
BONUSVIEW/PIP (Picture-in-Picture)
This is a new function of BD-Video that
plays the primary video and secondary video
simultaneously. Blu-ray players with Final
Standard Profi le or Profi le 1.1 specs can play
Bonus View features.
C
C
Russia, India
China
EN
7
Page 9
Product overview
Main unit
ab
a ( Standby-On )
Turn on the Home Theatre System or
switch to standby mode.
b SOURCE
Select media to play or listen to audio
from the connected device.
c VOL +/-
Increase or decrease volume.
d
e
( Stop )
Stop play.•
Press and hold to erase the preset •
radio station.
( Play/Pause )
Star t, pause or resume play.•
In radio mode, automatically tune •
radio stations during fi rst-time setup.
cdefg
ijk
h
i Disc compartment
j MP3 LINK jack
Connect a portable audio player.
k
USB jack
Connect a USB suppor ted device.
Remote control
|
{
z
y
x
w
v
u
t
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
f
( Open/Close )
Open or close the disc compartment.
g Display panel
h IR sensor
Detect signals from the remote control.
Point the remote control directly at the
sensor.
8
EN
Page 10
a
( Standby-On )
Turn on the home theatre or switch •
it to standby mode.
When EasyLink is enabled, press •
and hold for at least three seconds
to turn all connected HDMI CECcompliant devices to standby.
b
OPEN/CLOSE
Open or close the disc compartment.
c Source buttons
• DISC / POP-UP MENU: Switch to
disc source.Access to disc menu
during play.
• RADIO: Switch to FM radio.
• USB: Switch to the connected USB
device.
• AUDIO SOURCE: Select an audio
input.
Display Device connected to
AUX1 AUDIO IN-AUX1
AUX2 AUDIO IN-AUX2
COAX IN DIGITAL IN-COAXIAL
OPTI IN DIGITAL IN-OPTICAL
MP3 LINK MP3 LINK
d Colour buttons
Blu-ray discs only: Select a task or option.
e
( Home menu )
Access the home menu.
f
OPTIONS
Access options for the current activity or
selection.
g
( Navigation buttons )
Navigate menus.
k ( Pause )
Pause play.•
Move the paused picture one step •
forward.
l
( Stop )
Stop play.•
Press and hold to erase the preset •
radio station.
m
( Mute )
Mute or restore audio output.
n TREBLE / BASS
Change treble or bass. Use with +/-.
o SOUND MODE
Select a sound mode.
p Numeric buttons
Select an item or setting.
q SUBTITLE
Select a subtitle language for video.
r REPEAT /PROGRAM
Toggle between various repeat or •
shuffl e modes.
In radio mode, press to start manual •
radio preset; press and hold to start
automatic radio preset.
s HDMI
Select the video resolution of HDMI
output from the home theatre.
t BONUS VIEW
Blu-ray discs only: Enable or disable the
Bonus View/Picture-In-Picture feature.
u AUDIO SYNC
Synchronise audio with video. Use with
+/-.
English
h OK
Confi rm an entry or selection.
i
INFO
Display information about what is playing.
j
(Play )
Star t or resume play.
v AUDIO
In video mode, toggle between audio •
languages.
In radio mode, toggle between •
stereo and mono.
w
+/- ( Volume +/- )
Increase or decrease volume.
EN
9
Page 11
x SURR. SOUND
Switch audio output to multi-channel •
surround or stereo mode.
For HTS7200 only: Switch audio •
output to DOLBY Virtual speaker or
Stereo mode.
y
/ ( Previous/Next )
In video mode, skip to previous or •
next title, chapter or track.
In radio mode, select a preset radio •
station.
z
/ ( Fast Backward / Fast Forward )
Fast reverse or fast forward. Press
repeatedly to change the search speed.
{
BACK
Return to a previous menu screen.
| TOP MENU
Access the main menu of a video disc.
10
EN
Page 12
3 Connect
Make the following connections to use your
Home Theatre System. For a comprehensive
interactive guide, see www.connectivityguide.
philips.com.
Basic connections:
Video•
Speakers and subwoofer•
Power•
Optional connections:
Radio antenna•
Audio•
Audio from TV•
Audio from cable box/recorder/•
game console
Other devices•
Portable media player•
USB device•
LAN (Network)•
Note
FRONT
LEFT
FRONT
RIGHT
SUBWOOFER
1 Place this Home Theatre System near to
the TV
2 Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3 Place the subwoofer at the corner of the
room or at least 1 metre (3 feet) away
from the TV.
Tip
To avoid magnetic interference or unwanted •
noise, never place this home theatre too close
to any radiation devices.
English
Refer to the type plate at the back or bottom •
of the product for identifi cation and supply
ratings.
Before you make or change any connections,
•
ensure that all devices are disconnected from
the socket.
Place the product
Place the product where it cannot be •
pushed, pulled over or knocked down.
Do not place it in an enclosed cabinet.
Make sure that you have full access to the •
power cord for easy disconnection of the
product from the power supply.
Connect video cables
Connect this Home Theatre System to a TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the HDMI jack (for •
a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component •
video jacks (for a standard TV or
progressive scan TV).
Option 3: Connect to the video (CVBS) •
jack (for a standard TV).
Note
You must connect this Home Theatre System •
directly to a TV.
EN
11
Page 13
Option 1: Connect to the HDMI jack
HDMI OUT
Option 2: Connect to the component
video jack
HDMI IN
1 Connect the HDMI cable to the HDMI
OUT jack on this Home Theatre System
and the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via •
a HDMI/DVI adapter. Connect an audio cable
for sound output.
You can optimise the video output. Press
•
HDMI repeatedly to select the best resolution
the TV can support.
To play back the digital video images of a BD-
•
video or DVD-video via an HDMI connection,
it is necessary that both the Home Theatre
System and the display device support a
copyright protection system called HDCP
(high-bandwidth digital content protection
system).
This type of connection provides the best
•
picture quality.
PbPr Y
PbPr Y
1 Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theatre System and the
COMPONENT VIDEO input jacks on the
TV.
Note
The component video input jack on the TV •
might be labelled as Y Pb Pr, Y Cb Cr or YUV.
•
This type of connection provides good picture
quality.
12
EN
Page 14
Option 3: Connect to the Video
(CVBS) jack
VIDEO
VIDEO OUT
VIDEO IN
1 Connect a composite video cable (not
supplied) to the VIDEO jack on this
Home Theatre System and the VIDEO
input jack on the TV.
Connect speakers and
subwoofer
English
Note
The video input jack on the TV might be •
labelled as A/V IN, VIDEO IN, COMPOSITE
or BASEBAND.
This type of connection provides standard
•
picture quality.
Connect speaker cables to
speakers
1 Connect the speakers and subwoofer to
the matching jacks on this Home Theatre
System.
Note
Ensure that the colours of the plugs and jacks •
are matched.
Connect radio antenna
1 Match the colour of the cable to the
terminal tab.
2 Press the terminal tab down and insert
the stripped end of the speaker cable,
then release.
FM (75 Ω)
ANTENNA
EN
13
Page 15
1 Connect the FM antenna to the FM75
jack on this Home Theatre System
(for some models, this cable is already
connected).
2 Extend the FM antenna and fi x its ends to
the wall.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the
display panel.
Tip
For better FM stereo reception, connect to an •
external FM antenna.
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theatre System to enjoy audio play with
multi-channel surround capabilities.
Connect audio to TV
(also used for EasyLink control)
Connect audio from a cable box,
recorder or games console
You can choose to connect to analogue
or digital jacks depending on the device
capabilities.
Connect to analogue jacks
AUX 2
AUDIO IN
AUX 1
AUDIO IN
AUDIO OUT
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on this
Home Theatre System and the AUDIO
output jacks on the TV.
14
EN
AUDIO OUT
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 jacks on this
Home Theatre System and the AUDIO
output jacks on the device.
Page 16
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘AUX2’ is displayed on the
display panel.
Connect to coaxial jack
COAXIAL
Connect to optical jack
OPTICAL
DIGITAL IN
OPTICAL
DIGITAL OUT
English
DIGITAL IN
COAXIAL
DIGITAL OUT
1 Connect a coaxial cable (not supplied)
to the DIGITAL-IN-COAXIAL jack
on this Home Theatre System and the
COAXIAL/DIGITAL output jack on the
device.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘COAX IN’ is displayed on the
display panel.
1 Connect an optical cable (not supplied)
to the DIGITAL-IN-OPTICAL jack
on this Home Theatre System and the
OPTICAL/SPDIF output jack on the
device.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the
display panel.
Connect portable media player
MP3
EN
15
Page 17
1 Connect a 3.5 mm stereo audio cable
(not supplied) to the MP3 LINK jack
on this Home Theatre System and the
phone jack on the por table media player
(such as MP3 player).
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
Connect USB device
BROADBAND
1 Connect the network cable (not
supplied) to the LAN jack on this Home
Theatre System and the LAN jack on the
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a •
crossover cable.
•
Internet access to Philips website for software
updates may not be allowed, depending on
the router you use or the Internet Service
Provider’s policy. Contact your Internet
Service Provider for more information.
LAN
1 Connect the USB device to USB jack
on this Home Theatre System.
Note
This Home Theatre System can only play/view •
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
• USB to access the content and play the
Press
fi les.
Connect LAN
Connect this Home Theatre System to the
network for software updates and enjoy BDLive applications.
16
EN
Connect power cord
Warning
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1 Connect the power cord to the socket
when all the required connections are
made.
This product is ready to be set up for »
use.
Page 18
4 Get started
Insert the remote control
Navigate through the menu
1 Point the remote control directly at the
remote sensor on the product and select
the desired function.
English
batteries
1 On the back of the remote control, slide
the battery cover to remove it.
2 Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
2 Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button Action
Move up or down
Move left or right
OK Confi rm a selection
Enter numbers
Access to the Home
menu.
Find the correct viewing
channel
3 Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon •
and alkaline, etc.).
Remove batteries if they are exhausted or if
•
the remote control is not to be used for a long
time.
Batteries contain chemical substances, they
•
should be disposed of properly.
1 Press ( Standby) to turn on this
product.
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your •
TV, then press the Channel Down
button until you see the Philips or
the Home menu screen.
Press the •
repeatedly on the remote control of
your TV.
Tip
The video-in channel is between the lowest •
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
SOURCE button
EN
17
Page 19
Use the Home menu
Play Disc USB Settings
Tip
You can set the default language for DVD disc, •
see (‘Adjust settings’ > ‘Video Setup’ > [Disc
Menu]).
Press ( Home menu).
Select • [Play Disc] to start disc play.
Select • [USB] to view the USB contents.
Select • [Settings] to access the setup
menu.
Select menu display language
Note
Skip this setting if this product is connected •
to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language
as per your TV setting.
1 In the Home menu, select [Settings] and
press OK.
2 Select [Preference Setup], then press .
3 Select [OSD Language], then press OK.
Set up network
Follow the steps below to help you set up the
network connection for software updates and
enjoy BD-Live applications.
1 Connect the home theatre to a
broadband modem or router.
2 Turn on your TV and switch to the
correct source for the home theatre.
3 Press , select [Settings], and then press
OK.
4 Select [Advanced Setup] > [Network] >
[Next].
5 Press OK.
The home theatre connects to the »
Internet. If connection fails, select
[Retry], then press OK.
6 Select [Finish], then press OK to exit.
OSD Language
Parental Control
Screen Saver
Change PIN
Display Panel
Auto Standby
PBC
Sleep Timer
English
Français
Deutsch
Italiano
Español
Nederlands
Svenska
Português
The language options are different •
depending on your country or
region. It may not correspond to the
illustration shown here.
4 Press to select a language, then press
OK.
Note
Loading BD-Live content from the Internet •
may take some time, depending on the fi le size
and the speed of the Internet connection.
18
EN
Page 20
Use Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Audio Input Mapping
When you map the connection between
other devices and the audio input jacks of
this Home Theatre System, you can enjoy
the System Audio Control (one-touch audio)
feature.
English
Note
Philips does not guarantee 100% •
interoperability with all HDMI CEC devices.
1 Turn on the HDMI CEC operations on
the TV and other connected devices. See
TVs/devices manual for details.
2 You can now enjoy the following Philips
EasyLink controls.
EasyLink
Turn off or turn on all EasyLink features.
One-touch play
When you press PLAY on the remote
control, the TV (if it supports one-touch
play) and the Home Theatre System will be
turned on. Disc play star ts if there is a disc
in the Home Theatre System and the TV
automatically switches to the correct channel
to show the video content.
One-touch standby
When you press and hold
the remote control, this Home Theatre
System and all the connected HDMI CEC
devices (if they support one-touch standby)
switch to standby mode simultaneously.
System Audio Control
When you play a device where the audio
output is routed to this Home Theatre
System, this Home Theatre System
switches to the corresponding audio source
automatically.
To use one-touch audio, map the connected
devices correctly to the audio input jacks of
this Home Theatre System.
( Standby) on
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output •
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
On
On
On
Off
1 Press , select [Settings], then press OK.
2 Select [EasyLink Setup], then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default.
3 Select [System Audio Control] > [On] .
4 Read the on-screen instructions and
press OK to select [Continue].
The Home Theatre System scans and »
displays the valid devices.
5 Press OK to select [Continue].
EN
19
Page 21
Philips TV
Aux1
Recorder
DVD player
Aux2
Coaxial
Optical
6 Select a connected device on the left of
the menu, then press
.
7 Select the connector that is used for the
device, then press OK.
Repeat steps 6–7 to map other »
devices.
8 Press to exit the menu.
Update audio mapping from
connected devices
If you have already mapped audio from
connected devices, you can use this procedure
to update your mapping.
1 Press , select [Settings], then press OK.
2 Select [EasyLink Setup] > [Audio Input
Mapping], then press OK.
3 Select a connected device, then press .
4 Select the connector that is used for the
device then press OK.
5 Repeat the steps 4–5 to map other
connected devices.
20
EN
Page 22
5 Play
Play a disc
Caution
Never place any objects other than discs into •
the disc compartment.
•
Never touch the disc optical lens inside the
disc compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
For a double-sided disc, load the side •
to play facing up.
3 Press to close the disc compartment
and start disc play.
To view disc play, turn on the TV to •
the correct viewing channel for this
Home Theatre System.
To stop disc play, press •
Note
Check the types of discs supported, (see •
‘Specifi cations’ > ‘Playback media’).
•
If the password entry menu is displayed, enter
the password before you can play the locked
or restricted disc (see ‘Adjust settings’ >
‘Preference Setup’ > [Parental Control]).
If you pause or stop a disc, the screen saver
•
appears after 10 minutes of inactivity. To
deactivate the screen saver, press any buttons.
After you pause or stop a disc and no buttons
•
are pressed within 30 minutes, this product
automatically switches to standby mode.
.
Information on disc contents
The contents of a disc are generally divided
into sections or folders (groups of titles/fi les)
as shown below.
BD-video, DVD-video
title 1
chapter 1 chapter 3
folder (group) 1
chapter 2
track 2track 1 track 5track 4track 3
MP3, Windows Media™ Audio, JPEG
chapter 1
Audio CD
‘Folders’ refers to the groups of fi les.•
‘Tracks’ refers to the contents recorded •
on the audio CD.
‘Files’ refers to the contents on a disc •
which are recorded in MP3, Windows
Media™ Audio/Video or JPEG fi le format.
title 2
chapter 2
folder (group)
2
file 3file 2file 1 file 2file 1
English
EN
21
Page 23
Play video
Control video play
1 Play a title.
Change video play
1 Play a title.
2 Use the remote control to change the
video play.
2 Use the remote control to control the
title.
Button Action
Pauses play.
(Play) Star ts or resumes play.
Stops play.
Home menu is displayed.•
Skips to the next title or
chapter.
Skips to the beginning of the
current title or chapter. Press
twice to jump to the previous
title or chapter.
/ Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the
search speed.
In pause mode, slow •
motion backwards or
forwards play.
Note
Disc play always resumes from the point •
where it was last stopped. To star t play from
the beginning, press OK while the message is
displayed.
For BD disc with Java application, the resume
•
function is not available.
Button Action
AUDIO Selects an audio language or
channel.
SUBTITLE Selects a subtitle language for
video.
REPEAT Selects or turns off repeat or
shuffl e mode.
Repeat options vary •
depending on the disc
type.
For VCDs, repeat play is •
only possible when the
PBC mode is turned off.
INFO Displays the current status or
the disc information.
OPTIONS Accesses options for the
current activity or selection.
Change the play options •
here without interrupting
disc play. For example,
Zoom, Time Search.
BONUS
VIEW
Turns on or off the
secondary video in a small
screen window during play
(applicable only to BDvideo that supports the
BONUSVIEW or Picture-InPicture feature).
22
Note
Some operations may not work with some •
discs. See the information accompanying the
disc for details.
EN
Page 24
Display menu
BD-video disc
• TOP MENU stops the video play and
shows the disc menu. This feature is discdependent.
• POP-UP MENU accesses the BD-video
disc menu without interrupting disc play.
Quick skip to a specifi c time
1 During play, press OPTIONS.
The play options menu is displayed.»
2 Select [Time Search] in the menu, then
press OK.
3 Press the Numeric buttons to change
the time where you want to skip to, then
press OK.
Zoom in/out
1 During play, press OPTIONS.
The play options menu is displayed.»
English
DVD-video disc
• DISC MENU displays disc information
and guides you through the available
functions in the disc.
• TOP MENU displays the contents in the
disc.
VCD/SVCD disc:
• DISC MENU displays the content of the
disc.
Tip
If the PBC setting is off, the VCD/SVCD skips •
the menu and starts playing from the fi rst title.
To display the menu before play, turn on the
PBC setting (see chapter ‘Adjust settings’ >
‘Preference Setup’ > [PBC]).
Select title/chapter
1 During play, press OPTIONS.
The play options menu is displayed.»
2 Select [Titles] or [Chapters] in the menu,
then press OK.
3 Select the title or chapter number, then
press OK.
2 Select [Zoom] in the menu, then press
OK.
3 Press the Navigation buttons ( )to
select a zoom factor, then press OK.
4 Press the Navigation buttons to pan
through the zoomed picture.
To cancel zoom mode, press •
BACK to display the zoom factor
bar, then press
zoom factor [X1] is selected.
repeatedly until
Repeat play for a specifi c section
1 During play, press OPTIONS.
The play options menu is displayed.»
2 Select [Repeat A-B] in the menu, then
press OK to set the starting point.
3 Forward the video play, then press OK to
set the ending point.
Repeat play starts.»
To cancel repeat play mode, press •
OPTIONS, select [Repeat A-B] and
press OK.
Note
The marked section for repeat play is only •
possible within a track /title.
EN
23
Page 25
View video play from different camera
Play BD-video
angles
1 During play, press OPTIONS.
The play options menu is displayed.»
2 Select [Angle List] in the menu, then
press OK.
3 Select an angle option, then press OK.
Play changes to the selected angle. »
Note
Applicable only to discs that contain multi-•
angle scenes.
Sync audio output with video play
If the video play is slower than the audio
output (the sound does not match with the
pictures), you can delay the audio output to
match the video.
Blu-ray video disc has a larger capacity and
supports features such as high-defi nition
videos, multi-channel surround sound,
interactive menus and so on.
1 Insert a BD-video disc.
2 Press , select [Play Disc] and press OK.
3 Play start automatically or select a play
option in the menu and press OK.
During play, you can press • TOP
MENU to display additional
information, features or content
stored in the disc.
During play, you can press • POP-UP
MENU to display the disc menu
without interrupting disc play.
Enjoy BONUSVIEW
Blu-ray discs that support the Bonus View
feature (also known as Picture-In-Picture)
allow you to view special content, such as a
director’s commentary, while watching the
main feature.
1 Press AUDIO SYNC.
‘AUDIO SYNC’ is displayed.»
2 Within fi ve seconds, press +/- to set
the delay time for audio output.
Note
If the volume control is not used within fi ve •
seconds, it resumes normal volume control
function.
24
EN
A Primary video
B Secondary video
1 Press BONUS VIEW to turn on the
secondary video window.
2 Press OPTIONS.
The play options menu is displayed.»
3 Select [2nd Audio Language] or [2nd
Subtitle Language] in the menu, then
press
.
Page 26
4 Select the language to play, then press
OK.
Enjoy BD-LIVE
(applicable only to BD Live enabled BD-Video)
Additional content such as movie trailers,
subtitles, etc. can be downloaded to the
external storage (USB) on this Home Theatre
System. Special video data may be played back
while they are being downloaded.
When the disc supporting BD-Live is played
back, the Home Theatre System or disc’s
ID can be sent to the content provider via
the Internet. Services and functions to be
provided differ depending on the disc.
Note
Use a USB device with at least 1 GB of free •
space to store the downloaded fi les.
Play DivX® video
DivX video is a digital media format that
retains high quality despite a high rate of
compression. You can enjoy DivX video on
the certifi ed product.
Note
You can only play DivX videos that were •
rented or purchased with the DivX
registration code of this player (see ‘Adjust
Settings’ > ‘Advanced Setup’ > [DivX® VOD
Code]).
You can play DivX video fi les of up to 4 GB.
•
Play music
Control a track
1 Play a track.
2 Use the remote control to control the
track.
Button Action
Pauses play.
(Play) Star ts or resumes play.
Stops play.
Skips to the next track.
Skips to the beginning of the
current track. Press twice to
jump to the previous track.
Selects an item to play.
English
1 Insert a disc or USB that contains the
DivX videos.
2 Press , select [Play Disc] or [USB], then
press OK.
A contents menu is displayed.»
3 Select a title to play, then press (Play).
4 Use the remote control to control the
video play.
Button Action
AUDIO Selects an audio language or
channel.
SUBTITLE Selects a subtitle language for
video.
Stops play.
For DivX Ultra video, press •
this button again to display
the contents menu.
/ Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the
search speed.
REPEAT Selects or turns off repeat or
shuffl e mode.
Note
For some commercial audio discs, disc play •
always resumes from the point where it was
last stopped. To start play from the fi rst track,
press OK.
EN
25
Page 27
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio fi le (fi les with .mp3, .wma extensions).
Play photo
Play photo as slideshow
1 Insert a disc or USB that contains the
MP3/WMA music.
2 Press , select [Play Disc] or [USB], then
press OK.
A contents menu is displayed.»
3 Select a folder, then press OK.
4 Select a track to play, then press (Play) .
To return to the main menu, press •
BACK.
Note
For a disc recorded in multiple sessions, only •
the fi rst session is played.
This product does not suppor t MP3PRO audio
•
format.
If any special characters are present in the MP3
•
track name (ID3) or album name, it might not
be displayed correctly on the screen because
these characters are not supported.
Some WMA fi les are protected by Digital
•
Rights Management (DRM), it cannot be
played on this product.
Folders/fi les that exceed the supported limit of
•
this product will not be displayed or played.
You can play JPEG photos (fi les with .jpeg or
.jpg extensions).
1 Insert a disc or USB that contains the
JPEG photos.
2 Press , select [Play Disc] or [USB], then
press OK.
A contents menu is displayed.»
3 Select the folder/album you want to play.
To select a photo, press the •
Navigation buttons.
To display the selected photo and •
start slideshows, press OK.
4 Press (Play) to start slideshow play.
Note
You may require more time to display the disc •
content on the TV due to the large number
of songs/photos compiled onto one disc/USB
device.
This product can only display digital camera
•
pictures according to the JPEG-EXIF format,
typically used by almost all digital cameras.
It cannot display Motion JPEG and pictures
in formats other than JPEG or sound clips
associated with pictures.
Folders/fi les that exceed the supported limit of
•
this product will not be displayed or played.
26
EN
Page 28
Control photo play
Play musical slideshow
1 Play photo slideshow.
2 Use the remote control to control the
photo.
Button Action
Rotates the photo anticlockwise.
Rotates the photo clockwise.
Flips the photo upside down.
Flips the photo left-to-right
(mirror image).
Stops play.
OPTIONS Accesses options for the
current activity or selection.
For example, Zoom.
Note
Some operations may not work with some •
discs or fi les.
Play MP3/WMA music fi les and JPEG
photo fi les simultaneously to create musical
slideshow. The MP3/WMA and JPEG fi les
must be stored on the same disc or USB
device.
1 Play MP3/WMA music.
2 Press BACK to return to the main
menu.
3 Navigate to the photo folder/album and
press OK to start slideshow play.
Slideshow begins and continues till the »
end of the photo folder or album.
Audio continues to play until the end »
of the disc.
To stop slideshow play, press •
To stop music play, press •
.
again.
Play from USB device
English
Set slideshow interval and animation
1 During play, press OPTIONS.
The play options menu is displayed.»
2 Select [Duration per slide] in the menu,
then press OK.
3 Select the duration per slide, then press
OK.
4 Select [Slide Animation] in the menu,
then press OK.
5 Select the type of slide animation effect
you want to apply, then press OK.
Play or view MP3, WMA/WMV, DivX (Ultra) or
JPEG fi les on the following USB devices:
fl ash drive•
memory card reader•
HDD (external power source needed)•
Digital camera•
/
EN
27
Page 29
1 Connect a USB device to the USB
jack.
2 Press , select [USB], then press OK.
A contents menu is displayed.»
3 Select a fi le to play, then press (Play).
Play starts (see ‘Play music, Play photo, »
Play video’ for details).
To stop play, press •
USB device.
or remove the
1 Connect a 3.5 mm stereo audio cable
(not supplied) from the MP3 LINK jack
on this Home Theatre System to the
‘headphone’ jack on the portable media
player.
2 Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ is displayed.
3 Start play on your por table media player.
To stop play, press • STOP on the
portable media player.
Note
If the device does not fi t into the USB jack, •
connect it through a USB extension cable.
•
Not all digital cameras are supported. Digital
cameras that require PC program installation
are not supported.
NTFS (New Technology File System) data
•
format not supported.
Play from portable media
player
Simply connect your portable media player (e.g.
MP3 player) to this Home Theatre System to
enjoy superb sound quality from your music
collections.
Note
Control playback is only possible on the •
portable media player.
Stop play on the portable media player before
•
you switch to other play media/source.
Play from radio
Check that the FM antenna has been connected
to this Home Theatre System. If not, connect
the supplied FM antenna to the FM75
and fi x its ends to the wall.
jack
28
EN
MP3
FM (75 Ω)
ANTENNA
Tip
For the best reception, place the antenna away •
from your TV and other sources of radiation.
•
For even better reception of FM stereo,
connect an external FM antenna (not
supplied).
Page 30
First time tuning
Reinstall all the radio stations
When you access radio mode for the fi rst
time, follow the instruction to install the radio
stations.
1 Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is »
displayed.
2 Press (Play).
All detected radio stations are stored.»
Once complete, it tunes to the fi rst »
preset radio station.
To stop auto tuning, press •
Note
This Home Theatre System can store up to a •
maximum of 40 radio stations.
If auto installation is not activated or less
•
than 5 radio stations are stored, you will be
prompted to install the radio stations again.
.
1 Press RADIO.
2 Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are »
replaced.
Note
Check the radio antenna connection if no •
stereo signal is detected or less than 5 stations
are detected during radio installation.
Search and store radio stations
individually
1 Press RADIO.
2 Press / .
It starts searching until a radio station »
is detected.
English
Listen to radio
1 Press RADIO.
2 Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for •
other radio stations remain
unchanged.
Note
3 Repeat step 2 until you tune to the radio
station you wish to store.
To fi ne tune the radio frequency, •
press
/ .
4 Press PROGRAM.
The preset station number blinks.»
If no action is carried out within 20 »
seconds after the above step, it exits
the preset mode.
5 Press / (or the Numeric buttons) to
select a preset number to store.
6 Press PROGRAM to confi rm.
If the FM radio station transmits RDS (Radio •
Data System) data, the name of the radio
station is displayed.
EN
29
Page 31
6 Adjust sound
Control the volume
Option Description
DOLBY VS Dolby Virtual surround
sound
STEREO Stereo sound from two
front speakers.
1 Press +/- to increase or decrease the
volume.
To mute, press •
To restore the volume, press •
or press
.
again
+.
Change treble and bass
Change the high frequency (treble) or low
frequency (bass) settings of the Home Theatre
System to suit your video or music.
1 Press TREBLE or BASS.
2 Within fi ve seconds, press +/- to
increase or decrease treble or bass.
Select surround sound
Experience an immersive audio experience with
surround sound modes.
Note
This product also contains the capability to •
decode 5.1 DTS-Digital Surround.
Select preset sound
Select predefi ned sound modes to suit your
video or music.
1 Press SOUND MODE repeatedly to
cycle through the available sound modes.
Sound mode Description
ACTION /
ROCK
DRAMA /
JAZZ
CONCERT/
CLASSIC
SPORTS Moderate mid-range and
Enhanced low and high-range.
Ideal for action movies and
rock or pop music.
Clear mid and high-range. Ideal
for drama movies and jazz
music.
Neutral sound. Ideal for live
concer ts and classical music.
surround effects for clear
vocals and the atmosphere of a
live spor t venue.
1 Press SURR. SOUND repeatedly to
select the vir tual speaker or stereo
sound.
30
EN
Page 32
7 Adjust settings
[Subtitle]
Selects the default subtitle language for disc
play.
You can customise various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
Note
You cannot change a setting that is greyed out.•
Video Setup
1 Press .
2 Select [Settings], then press OK.
3 Select [Video Setup], then press .
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
Audio
Subtitle
Disc Menu
TV Display
HDMI Video
HDMI Deep Color
Component Video
Picture Settings
English
Off
English
16:9 Widescreen
Auto
Auto
480i/576i
Standard
[Disc Menu]
Selects the language for the disc menu.
Note
If the language you have set is not available on •
the disc, the disc uses its own default language.
•
For some discs, the subtitle/audio language can
only be changed from the disc menu.
[TV Display]
Selects one of the following display formats
which the disc can support.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
• [4:3 Panscan] – For 4:3 screen TV: fullheight display with the trimmed sides.
• [4:3 Letterbox] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9 Widescreen] – For wide-screen TV:
display ratio 16:9.
English
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, •
press
To exit the menu, press •
Note
See the explanations of the above options in •
the following pages.
[Audio]
Selects the default audio language for disc play.
BACK.
.
[HDMI Video]
Selects the HDMI video output resolution
that is compatible with your TV display
capability.
• [Auto] - Detects and selects the best
supported video resolution automatically.
• [Native] - Sets to original video
resolution.
• [480i/576i], [480p/576p], [720p], [1080i],
[1080p], [1080p/24Hz] - Selects a video
resolution setting that is best supported
by the TV. See the TV manual for details.
31
EN
Page 33
Note
If the setting is not compatible with your TV, a •
blank screen appears. Wait for 15 seconds for
auto recover or press HDMI repeatedly until
the picture appears.
[HDMI Deep Colour]
This feature is available only when the display
device is connected by a HDMI cable, and
when it supports the deep colour feature.
• [Auto] - Switches on automatically if the
connected display device supports HDMI
deep colour.
• [On] - Enjoys vivid images in over a billion
colours on Deep Colour enabled TV.
Outputs 12 bit colour that reduces the
posterisation effect.
• [Off] - Outputs standard 8 bit colour.
[Picture Settings]
Selects a predefi ned set of picture colour
settings.
• [Standard] – Original colour setting.
• [Vivid] – Vibrant colour setting.
• [Cool] - Soft colour setting.
• [Action] – Sharp colour setting. It
enhances the details in the dark areas.
Ideal for action movies.
• [Animation] – Contrast colour setting.
Ideal for animated pictures.
[Black Level]
Improves black colour contrast.
• [Normal] - Standard black level.
• [Enhanced] - Enhances black level.
Audio Setup
[Component Video]
Selects the Component video output
resolution that is compatible with the TV
display capability.
• [480i/576i], [480p/576p], [720p], [1080i]
- Selects a video resolution setting that
is best supported by the TV. See the TV
manual for details.
Note
If the setting is not compatible with the TV, a •
blank screen appears. Wait for 15 seconds for
auto recovery.
1 Press .
2 Select [Settings], then press OK.
3 Select [Audio Setup], then press .
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
Night Mode
HDMI Audio
Off
Auto
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, •
press
To exit the menu, press •
BACK.
.
32
Note
See the explanations of the above options in •
the following pages.
EN
Page 34
[Night Mode]
Makes the loud sound level softer and the
soft sound level louder so that you can watch
the disc at a low volume, without disturbing
others.
• [On] – For quiet viewing at night.
• [Off] – For surround sound with a full
dynamic range.
Preference Setup
1 Press .
2 Select [Settings], then press OK.
3 Select [Preference Setup], then press .
Video Setup
OSD Language
English
English
Note
Applicable only to Dolby encoded DVD-video •
or BD-video.
[HDMI Audio]
Selects the HDMI audio output when you
connect this Home Theatre System and the
TV/audio device with a HDMI cable.
• [As Source]– The audio format is not
conver ted. A secondary audio track on a
Blu-ray disc might not be available.
• [Auto] – Detects and selects the best
supported audio format automatically.
• [Off] - Disables audio from the TV.
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
Parental Control
Screen Saver
Change PIN
Display Panel
Auto Standby
PBC
Sleep Timer
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, •
press
To exit the menu, press •
Note
See the explanations of the above options in •
the following pages.
BACK.
.
Off
On
100%
On
On
Off
[OSD Language]
Selects the default on-screen menu language.
Note
If this product is connected to a HDMI CEC •
compliant TV using a HDMI cable, it switches
automatically to the same menu display
language as per your TV setting.
EN
33
Page 35
[Parental Control]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
To access, enter your last set password or
‘0000’ using the keyboard on the TV.
Note
[Auto Standby]
Turns off or turns on standby switching mode.
It is an energy saving feature.
• [On] - Switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
• [Off] - Disables auto standby mode.
Rated discs above the level you set in • [Parental
Control] require a password to be played.
The ratings are country-dependent. To allow
•
all discs to play, select ‘ 8’ for DVD-video and
BD-Video.
Some discs have ratings printed on them but
•
are not recorded with ratings. This function
has no effect on such discs.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
• [On] - Sets the screen saver to appear
after 10 mins of inactivity (for example, in
pause or stop mode)
• [Off] - Disables screen saver mode.
[Change PIN]
Sets or changes the password.
[PBC]
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
• [On] - Displays the index menu when you
load a disc to play.
• [Off] - Skips the menu and star ts play
from the fi rst title.
[Sleep Timer]
Switches to standby automatically after a delay.
• [Off] – Disables the sleep timer.
• [15 Minutes],[30 Minutes], [45 Minutes],
[60 Minutes] – Selects a delay.
EasyLink Setup
1 Press .
2 Select [Settings], then press OK.
3 Select [EasyLink Setup], then press .
1) Press the Numeric buttons to enter the
password or your last set password. If you
forget the password, enter ‘ 0000’, then press
OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confi rm] in the menu and press
OK.
[Display Panel]
Selects the brightness level of the front panel
display.
• [100%] - Brightest
• [70%] - Medium
• [40%] - Dimmest
34
EN
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, •
press
To exit the menu, press •
BACK.
.
On
On
On
Off
Page 36
Note
See the explanations of the above options in •
the following pages.
[EasyLink]
Your product supports Philips Easylink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
• [On] - Enables EasyLink features.
• [Off] - Disables EasyLink features.
[One Touch Play]
When you press PLAY on the remote control,
the TV (if it suppor ts one-touch play) and
the Home Theatre System will be turned on.
Disc play starts if there is a disc in the Home
Theatre System and the TV automatically
switches to the correct channel to show the
video content.
• [On] - Enables one-touch play feature.
• [Off] - Disables one-touch play feature.
[System Audio Control]
When you play a device where the audio
output is routed to this Home Theatre System,
this Home Theatre System switches to the
corresponding audio source automatically.
• [On] - Enables system audio control
feature. Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
• [Off] - Disables system audio control
feature.
[Audio Input Mapping]
Maps the connection between other devices
and the audio input jacks of this Home
Theatre System. Only the detected devices
will be displayed for mapping.
Note
You need to enable the • [System Audio
Control] before you can map the audio input.
Advanced Setup
English
[One Touch Standby]
When you press and hold
( Standby) on the
remote control, this Home Theatre System
and all the connected HDMI CEC devices (if
they suppor t one-touch standby) switch to
standby mode simultaneously.
• [On] - Enables one-touch standby
feature.
• [Off] - Disables one-touch standby
feature.
Note
When • [Off] is selected, the Home Theatre
System cannot be switched to standby by a
remote control from the TV or other devices.
1 Press .
2 Select [Settings], then press OK.
3 Select [Advanced Setup], then press .
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
BD Live Security
Network
Software Download
Clear Local Storage
DivX® VOD Code
Version Info.
Restore Factory Settings
Off
4 Select an option, then press OK.
5 Select a setting, then press OK.
To return to the previous menu, •
press
To exit the menu, press •
BACK.
.
EN
35
Page 37
Note
See the explanations of the above options in •
the following pages.
[BD-Live Security]
You can restrict Internet access when BDR/RE disc is used.
• [On] - Internet access is prohibited for all
BD-Live contents.
• [Off]- Internet access is permitted for all
BD-Live contents.
[Network]
Sets up a connection to an external network
for software download and BD-Live
applications. It guides you through a step-bystep network installation procedure.
[Clear Local Storage]
Deletes the content of the BD-Live storage
folder on the USB drive.
Note
Local storage is a folder (BUDA) located on •
the connected USB device.
[DivX® VOD Code]
Displays the DivX® registration code.
Tip
Enter this product’s DivX registration code •
when you rent or purchase a video from www.
divx.com/vod. The DivX videos rented or
purchased through the DivX® VOD (Video
On Demand) ser vice can be played only on
the device to which it is registered.
Note
There is more detailed description available, •
see ‘Getting Started’ > ‘Set up network’.
[Software Download]
Updates the software of this product (if a
newer version is available on Philips website)
to enhance playability.
• [USB] - Downloads software via USB.
• [Network] - Downloads software via
network.
Note
There is more detailed description available, •
see ‘Additional Information’ > ‘Upgrade
Software’.
[Version Info.]
Displays the software version of this Home
Theatre System.
Tip
This information is required when you want to •
fi nd out if a newer software version is available
at the Philips website that you may download
and install on this Home Theatre System.
[Restore Factory Settings]
Resets all the settings of this product to
factory default, except for [Parental Control]
setting.
36
EN
Page 38
8 Update software
Update software via USB
To check for new updates, compare the current
software version of your home theatre with
the latest software version (if available) on the
Philips website.
1 Press .
2 Select [Settings], then press OK.
3 Select [Advanced Setup] > [Version
Info.], then press OK.
Update software via network
1 Prepare the network connection, see
chapter ‘Getting Started’ > ‘Set up
network’ for detailed information.
2 At Home menu, select [Settings]
> [Advanced Setup] > [Software
Download] > [Network].
3 Follow the instructions on the TV to
confi rm update operation.
Once software update is complete, »
this Home Theatre System turns off to
standby automatically.
4 Disconnect the power cord for a few
seconds and connect again to reboot the
Home Theatre System.
1 Go to the www.philips.com/support to
check the latest software version available
for this Home Theatre System.
2 Create a folder named ‘UPG’ in the root
of a USB fl ash drive.
3 Download the software onto the ‘UPG’
folder of the USB fl ash drive.
4 Unzip the downloaded software in the
‘UPG’ folder.
5 Insert the USB fl ash drive to this Home
Theatre System.
6 At Home menu, select [Settings]
> [Advanced Setup] > [Software
Download] > [USB].
7 Follow the instructions on the TV to
confi rm update operation.
Once software update is complete, »
this Home Theatre System turns off to
standby automatically.
8 Disconnect the power cord for a few
seconds and connect again to reboot the
Home Theatre System.
Note
Do not turn off the power or remove the USB •
when software updating is in progress as it
may damage the Home Theatre System.
English
EN
37
Page 39
9 Specifications
Note
Specifi cation and design are subject to change •
without notice
Playback media
BD-Video, BD-R, BD-RE, DVD-Video, •
DVD+R/+RW, DVD-R/-RW, DVD+R /-R
DL, CD-R/CD-RW, Audio CD, Video
CD/SVCD, Picture CD, MP3-CD, WMACD, DivX (Ultra)-CD, USB fl ash drive.
USB
Compatibility: Hi-Speed USB (2.0)•
Class support: UMS (USB Mass Storage •
Class)
File system: FAT16, FAT32•
Main Unit
Power supply: 220-240V; ~50 Hz•
Power consumption: 100 W•
Standby power consumption: < 0.8 W •
Dimensions (WxHxD): 360 x 72 x 345 •
(mm)
Weight: 4.2 kg•
Amplifi er
Total output power: 440 W RMS (±0.5 dB)•
Frequency response: 40 Hz – 20 kHz•
Signal-to-noise ratio: > 65 dB (A-weighted)•
Input sensitivity:•
AUX 1/2: 400 +/-100 mV•
MP3 LINK: 250 +/-100 mV•
Video
Signal system: PAL/NTSC•
Component video output: 480i/576i, •
480p/576p, 720p, 1080i
HDMI output 480p, 576p, 720p, 1080i, •
1080p, 1080p24
Audio
S/PDIF Digital audio input:•
Coaxial: IEC 60958-3•
Optical: TOSLINK•
Sampling frequency:•
MP3: 32 kHz, 44.1 kHz, 48 kHz•
WMA: 44.1 kHz, 48 kHz•
Constant bit rate:•
MP3: 112 kbps - 320 kbps•
WMA: 48 kbps - 192 kbps•
Radio
Tuning range: FM 87.5-108 MHz (50 kHz)•
Signal-to-noise ratio: FM 50 dB•
Frequency response: FM 180 Hz – 9 kHz •
/ ±6dB
Speakers
System: full range satellite•
Speaker impedance: 4 ohm•
Speaker drivers: 2 x 3” woofer + 2” •
tweeter
Frequency response: 150 Hz – 20 kHz•
Dimensions (WxHxD): 130 x 362 x 130 •
(mm)
Weight: 1.8 kg•
Subwoofer
Impedance: 3 ohm•
Speaker drivers: 165 mm (6.5”) woofer•
Frequency response: 45 Hz – 5 kHz•
Dimensions (W x H x D): 295 x 375 x •
295 (mm)
Weight: 6.3 kg•
Laser Specifi cation
Laser Type: •
BD Laser Diode: InGaN/AIGaN•
DVD Laser Diode: InGaAIP•
CD Laser Diode: A IGaAs•
Wave length: •
BD: 405 +5 nm/-5 nm•
DVD: 650 +5nm/-10nm•
CD: 790 +10nm/-20nm•
Output power: •
BD: Max. ratings: 20 mW•
DVD: Max. ratings: 7 mW•
CD: Max. ratings: 7 mW•
38
EN
Page 40
10 Troubleshooting
Warning
Picture
No picture.
Ensure that the TV is switched to the •
correct source for this home theatre.
English
Risk of electric shock. Never remove the •
casing of the product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back or bottom of your product. Write the
numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
No picture on HDMI connection.
If the connected device is not HDCP-•
compliant, you cannot transmit
pictures through a HDMI connection.
Use composite or component video
connection.
Check if the HDMI cable is faulty. Replace •
a new HDMI cable.
If this happens when you change the •
HDMI video resolution, press HDMI
repeatedly until the picture appears.
No picture on the Component (Y Pb Pr)
connection.
If the HDMI video connection is set to •
[Auto] or [1080p/24Hz], there is no
video output through the component
connection. Change the HDMI video
setting or remove the HDMI connection.
The buttons on this home theatre do not
work.
Disconnect the home theatre from the •
socket for a few minutes, then reconnect.
No high-defi nition video signal on the TV.
Make sure that the disc contains high-•
defi nition video.
Make sure that the TV supports high-•
defi nition video.
Sound
No sound.
Make sure that the audio cables are •
connected and select the correct input
source (for example, AUDIO SOURCE,
USB) for the device you want to play.
EN
39
Page 41
No sound on HDMI connection.
If the connected device is not HDCP-•
compliant or is only DVI-compatible, you
cannot transmit sound through an HDMI
connection. Use an analogue or digital
audio connection.
Make sure that the •[HDMI Audio] setting
is turned on.
No sound from TV programme.
Connect an audio cable from the audio •
input on this home theatre to the audio
output on your TV. Then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Data fi les (JPEG, MP3, WMA) cannot be
played or read.
Ensure that the data fi le was recorded in •
the UDF, ISO9660 or JOLIET format.
Ensure that the JPEG fi le extension is.jpg, •
.JPG, .jpeg or .JPEG.
Ensure that the MP3/WMA fi le extension •
is .mp3 or .MP3, and .wma or .WMA for
windows Media™ Audio.
DivX video fi les cannot be played.
Ensure that the DivX video fi le is •
complete.
Ensure that the fi le name extension is •
correct.
No surround sound effect from the speakers.
Press • SURR. SOUND to select a correct
surround sound setting.
Ensure that the source you play is •
recorded or broadcast in surround
sound (Dolby Digital, etc). Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analogue or digital audio connection.
Play
Disc cannot be played.
Ensure that this product supports the •
disc. See ‘Specifi cations’.
Ensure that this product supports the •
region code of the DVD or BD.
For DVD±RW or DVD±R, ensure that •
the disc is fi nalised.
Clean the disc. •
The contents of the USB fl ash drive cannot
be read.
The USB fl ash drive format is not •
compatible with this product.
Drive is formatted with a different fi le •
system which is not supported by this
product (e.g. NTFS).
‘No entry’ sign appears on the TV.
The operation is not possible.•
Unable to access BD-Live feature.
Check the network connection or ensure •
that the network has been set up.
Clear local storage, internal memory (if •
any) or USB.
Ensure that the BD disc supports the BD •
Live feature.
40
EN
Page 42
11 Glossary
A
AVCHD
AVCHD is a new format (standard) for high
defi nition video cameras that can be used to
record and play high-resolution HD images.
B
BD-J
Some BD-Video discs contain Java
applications, and these applications are called
BD-J. You can enjoy various interactive
features in addition to playing normal video.
D
DivX Video
DivX® is a digital video format created by
DivX, Inc. This is an offi cial DivX Cer tifi ed
device that plays DivX video. Visit www.divx.
com for more information and software tools
to conver t your fi les into DivX video.
DivX Video-On-Demand
This DivX Certifi ed ® device must be
registered in order to play DivX Video-onDemand (VOD) content. To generate the
registration code, locate the DivX VOD
section in your device setup menu. Go to
vod.divx.com with this code to complete the
registration process and learn more about
DivX video.
English
Blu-ray Disc (BD)
A Blu-ray Disc is a next generation optical
video disc capable of storing fi ve times
more data than a conventional DVD. The
large capacity makes it possible to benefi t
from features such as high-defi nition videos,
multichannel surround sound, interactive
menus and so on.
BONUSVIEW
This is a BD-Video (Final Standard Profi le or
Profi le 1.1) that supports interactive content
encoded on the disc, such as picture-inpicture. This means you can play the primary
video and secondary video simultaneously.
Dolby Digital
A surround sound system developed by Dolby
Laboratories that contains up to six channels
of digital audio (front left and right, surround
left and right, centre and subwoofer.)
Dolby Pro Logic IIx
An advanced, matrix decoding technology that
expands any two channel or multi-channel 5.1
audio to 7.1 channel playback, resulting in a
surround sound experience.
Dolby TrueHD
Dolby TrueHD is a very high quality audio
format that reproduces the studio master
audio.
DTS
Digital Theatre Systems. A surround sound
system for providing 5.1 channels of discrete
digital audio in consumer electronics products
and software content. It is not developed by
Dolby Digital.
DTS-HD
DTS- HD is a high-quality, sophisticated audio
format used in cinemas. Previous DTS Digital
Surround-compatible equipment can play
DTS-HD as DTS Digital Surround audio. BDVideo supports up to 7.1-channel output.
41
EN
Page 43
H
M
HDCP
High-bandwidth Digital Content Protection.
This is a specifi cation that provides a secure
transmission of digital contents between
different devices (to prevent unauthorised
copyright.)
HDMI
High-Defi nition Multimedia Interface (HDMI)
is a high-speed digital interface that can
transmit uncompressed high defi nition video
and digital multichannel audio. It delivers high
quality picture and sound quality, completely
free from noise. HDMI is fully backwardcompatible with DVI.
As required by the HDMI standard,
connecting to HDMI or DVI products without
HDCP (High-bandwidth Digital Content
Protection) will result in no Video or Audio
output.
J
JPEG
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which causes only a small decrease in
image quality in spite of its high compression
ratio. Files are recognised by their fi le
extension ‘.jpg’ or ‘.jpeg’.
MP3
A fi le format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
P
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD with
on-screen menus that are recorded onto the
disc. You can enjoy interactive playback and
search.
W
WMA
Windows Media™ Audio. Refers to an
audio compression technology developed by
Microsoft Corporation. WMA data can be
encoded with Windows Media player version
9 or Windows Media player for Windows XP.
Files are recognised by their fi le extension
‘.wma.’
L
LAN (Local Area Network)
A group of linked devices in a company,
school or home. Indicates the boundaries of a
particular network.
Local storage
This storage area is used as destination for
storing additional content from BD-Live
enabled BD-Video.
42
EN
Loading...