Philips HTS3050 User Manual

DVD HOME THEATER SYSTEM

User Manual 6

Manual de Instrucciones 46

Thank you for choosing Philips.

Need help fast?

Read your Quick Use/Start Guide and/or User Manual first for quick

tips that make using your Philips product more enjoyable.

If you have read your instructions and still need assistance,

you may access our online help at www.philips.com/support

HTS3050

001-045-hts3050-16-Eng2 4/1/06, 3:48 PM1

3139 115 2xxx1

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be a BS1362 5 Amp,

A.S.T.A. or BSI approved type .

3 Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

¶ As these colours may not correspond with the

colour markings identifying the terminals in your plug, proceed as follows: – Connect the blue wire to the terminal marked N or coloured black. – Connect the brown wire to the terminal marked L or coloured red. – Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

ATENCIÓN

El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

001-045-hts3050-16-Eng2 13/1/06, 9:12 AM2

3139 115 2xxx1

Index

English ----------------------------------------- 6

Español -------------------------------------- 46

English

Español

001-045-hts3050-16-Eng2 4/1/06, 3:13 PM3

3139 115 23271

LASER

Type Semiconductor laser

GaAlAs

Wave length 650~660 nm (DVD)

784~796 nm (CD)

Output Power 7 mW (DVD)

10 mW (VCD/CD)

Beam divergence 60 degree

This product complies with the radio interference requirements of the European Community.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

DivX

, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.

CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU

Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries

This DVD system is in conformity with the EMC directive and low-voltage directive.

As an ENERGY STAR® partner; Philips has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

001-045-hts3050-16-Eng2 4/1/06, 3:13 PM4

For Customer Use:

Read carefully the information located at the bottom of your DVD system and enter below the Serial No. Retain this information for future reference.

Model No. DVD VIDEO HTS3050 Serial No. _______________

3139 115 2xxx1

Language Code

Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783

Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985  6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385

Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084

Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085

001-045-hts3050-16-Eng2 4/1/06, 3:13 PM5

3139 115 2xxx1

Contents

English

Language Code ......................................5

General Information

Supplied accessories ................................... 8

Cleaning discs............................................... 8

Setup .............................................................. 8

Basic Connections

Step 1: Placing the speakers and

subwoofer ..................................................... 9

Step 2: Connecting to TV and the

speakers system......................................... 10

Step 3: Connecting FM/MW antennas ... 11

Step 4: Connecting the power cord ..... 11

Connection to External Devices

Connecting an audio/video device ........ 12

Main Unit ............................................... 13

Remote Control......................... 14–15

Getting Started

Step 1: Inserting batteries into the

remote control .......................................... 16

Using the remote control to

operate the system .............................. 16

Step 2: Switching on the DVD system .. 16

Switching to Eco Power standby

mode .......................................................16

Step 3: Setting the TV ............................... 16

Selecting the matching colour

system ..................................................... 17

Setting the TV Display ......................... 17

Step 4: Setting language preferences ..... 18

On-Screen Display (OSD) language. 18 Audio, Subtitle and Disc menu

languages ................................................ 18

Disc Operations

Playable discs .............................................. 19

Playing discs ................................................ 19

Auto Eco Power standby mode........ 20

Basic playback controls............................ 20

Selecting various repeat/shuffle

functions ...................................................... 20

Other operations for video playback

(DVD/ VCD/ SVCD) ................................. 21

Using the Disc Menu (DVD only) ....21

Viewing playback information............ 21

Advancing by frame ............................. 22

Resuming playback from the last

stopped point ........................................ 22

Zooming in ............................................ 22

Changing sound track language......... 22

Changing subtitle language

(DVD only) ............................................ 22

Preview Function (VCD/SVCD only)23 Playing MP3/Windows Media™ Audio/

JPEG disc ..................................................... 24

Playing MP3 music and JPEG

picture simultaneously ........................ 24

Playing a picture disc (slide show)......... 25

Preview Function.................................. 25

Zoom picture........................................ 25

Rotating/Fliping the picture................ 25

Supported JPEG picture formats ......25

Playing a DivX disc.................................... 26

001-045-hts3050-16-Eng2 4/1/06, 3:13 PM6

3139 115 2xxx1

Contents

DVD Setup Menu Options

Accessing General Setup Page ............... 27

Locking/Unlocking the disc

for viewing .............................................27

Dimming system’s display panel ........ 27

Programming disc tracks (not

for Picture CD/ MP3) .......................... 28

OSD language ....................................... 28

Screen Saver – turning on /off ........... 29

DivX(R) VOD registration code ....... 29

Accessing Audio Setup Page ................... 30

Speakers Volume/Speakers Delay ...... 30

Night mode – turning on/off ............ 30

CD Upsampling .................................... 30

Accessing Video Setup Page .................... 31

TV Type ................................................... 31

TV Display ............................................. 31

Picture Setting................................ 31–32

Accessing Preference Setup Page .......... 32

Audio, Subtitle, Disc Menu ................. 32

Restricting playback by Parental

Control................................................... 33

PBC (Playback Control)...................... 34

MP3/JPEG menu– turning on/ off .....34

Changing the Password....................... 34

Setting the DivX Subtitle font ........... 35

Restoring to original settings ............ 35

Sound and Volume Controls

Individual speakers volume adjustment 38

Selecting surround sound........................ 39

Selecting digital sound effects ................. 39

Volume Control ......................................... 39

Other Functions

Setting the Sleep timer ............................ 40

Specifications ......................................41

Troubleshooting ......................... 42–43

Glossary ............................................. 44–45

English

Tuner Operations

Tuning to radio stations ........................... 36

Presetting radio stations.......................... 36

Using the Plug and Play ....................... 36

Automatic presetting .......................... 37

Manual presetting ................................. 37

Selecting a preset radio station ............. 37

Deleting a preset radio station ..............37

001-045-hts3050-16-Eng2 4/1/06, 3:13 PM7

3139 115 2xxx1

General Information

English

Supplied accessories

Scart cable (black)

FM wire antenna

MW loop antenna

Remote control and two batteries

(12nc: 3139 258 70111)

Setup

Finding a suitable location

– Place the set on a flat, hard and stable surface. Do not place the set on a carpet. – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier). – Do not put anything under the set (e.g., CDs, magazines).

Space for ventilation

– Place the apparatus in a location with adequate ventilation to prevent internal heat build up. Allow at least 10 cm (4.5”) clearance from the rear and the top of the set and 5cm (2.3”) from the left and right to prevent overheating.

5cm (2.3")

10cm (4.5")

5cm (2.3")

10cm (4.5")

Cleaning discs

To clean a disc, use a micro fibre cleaning cloth and wipe the disc from the center to the edge in a straight line.

CAUTION!

Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static sprays intended for discs.

Since the optical unit (laser) of the DVD system operates at a higher power than regular DVD or CD players, cleaning CDs intended for DVD or CD players may damage the optical unit (laser). Therefore, refrain from using a cleaning CD.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM8

Avoid high temperatures, moisture, water and dust

– Apparatus shall not be exposed to dripping or splashing. – Do not place any sources of danger on the apparatus (e.g., liquid filled objects, lighted candles).

3139 115 2xxx1

Step 1: Placing the speakers

and subwoofer

Basic Connections

English

CENTER

For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position.

1 Place the front left and right speakers at

equal distances from the TV and at an angle of approximately 45 degrees from the listening position.

2 Place the centre speaker above the TV or

the DVD system so that the centre channel’s sound is localised.

3 Place the rear speakers at normal

listening ear level facing each other or hang on the wall.

4 Place the subwoofer on the floor near

the TV.

SUBWOOFER

FRONT RFRONT L

REAR RREAR L

Helpful Hints: – To avoid magnetic interference, do not position the front speakers too close to your TV. – Allow adequate ventilation around the DVD system.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM9

3139 115 2xxx1

Basic Connections (continued)

English

Step 2: Connecting to TV

and the speakers system

Subwoofer

Front Left

Speaker

Rear Left

Speaker

IMPORTANT! – Connect the DVD system directly to the TV. – Proceed to page 16 for setting up the TV once you have completed the connections.

1 Use the supplied scart video cable (black)

to connect the DVD system’s SCART socket to the corresponding Scart input socket on the TV.

2 Connect the supplied speakers system

using the fixed speaker cables by matching the colours of the sockets and speaker cables.

Front Right

Speaker

Rear Right

Speaker

DVD System

Centre Speaker

Helpful Hints: – Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to a shortcircuit. – To prevent unwanted noise, do not place the subwoofer too close to the DVD system, AC power adaptor, TV or other radiation sources.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM10

3139 115 2xxx1

Basic Connections (continued)

Step 3: Connecting FM/MW

antennas

fix the claw

into the slot

➠

antenna

1 Connect the supplied MW loop antenna

to the MW socket. Place the MW loop antenna on a shelf, or attach it to a stand or wall.

2 Connect the supplied FM antenna to the

FM socket. Extend the FM antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Step 4: Connecting the

power cord

DVD system

After everything is connected properly, plug the AC power cord into the power outlet.

The red Eco Power LED on the DVD system will light up. Never make or change any connections with the power switched on.

Helpful Hint: – Refer to the type plate on the rear of the subwoofer for identification and supply ratings.

English

Helpful Hints: – Adjust the position of the antennas for optimal reception. – Position the antennas as far as possible from your TV, VCR or other radiation source to prevent unwanted interference.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM11

3139 115 2xxx1

Connection to External Devices

English

Connecting a audio/video device

AUDIO OUT

Audio/Video

Device

DVD System

You can connect other audio/video device to the DVD system in order to use the Home Theatre Audio System’s surround sound capabilities.

● Use an audio cable (red/white, not

supplied) to connect the DVD system’s AUX IN (R/L) sockets to the AUDIO OUT sockets on the audio/video device.

To listen to the sound, press AUX/DI to select “AUX” as the source to play.

Helpful Hint: – Always refer to the user manual of the other devices for complete connection and use details.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM12

3139 115 2xxx1

Main Unit

8 9

1 STANDBY ON (B)

– Switches to Eco Power standby mode, or

turns on the system.

2 Disc tray

3 OPEN CLOSE 0

– Opens/Closes the disc tray.

4 ECO POWER indicator

– Lights up when in Eco Power standby

mode.

5 iR

– Point the remote control towards this

sensor.

6 System display panel

7 VOLUME

– Adjusts the volume level.

0 !

8 SOURCE

– Selects the relevant active source mode:

DISC, TUNER (FM/MW), TV or AUX.

9 ÉÅ PLAY/PAUSE

– DISC: starts/pauses playback. – TUNER: starts preset radio station

installation in Plug & Play mode.

0 S PREV / NEXT T

– DISC: *searches backward/forward or

selects a track.

– TUNER: selects a preset radio station.

! Ç STOP

– Exits an operation. – DISC: stops playback. – TUNER: hold down this button to erase

the current preset radio station.

English

* = Press and hold the button for more than two seconds.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM13

3139 115 2xxx1

Remote Control

English

6 7

8 9

0 !

1 B

– Switches to Eco Power standby mode, or

turns on the system.

2 VOL +-

– Adjusts the volume level.

3 1 2 3 4

– DISC: selects movement direction in the

menu.

– TUNER: use 3 4 to start auto searching,

use 1 2 to tune the radio frequency up/ down.

4 S / T

– DISC: *searches backward/forward or

selects a track.

– TUNER: selects a preset radio station.

5 PAUSE Å

– DISC: pauses playback.

6 Source buttons

DISC : switches to DISC source mode. TV: switches to TV source mode.

The sound from TV will come out through the DVD system. TUNER: toggles between FM and MW band. AUX/DI: switches to external mode.

7 SETUP

– DISC: enters or exits system setup menu.

* = Press and hold the button for more than two seconds.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM14

8 ZOOM

– DISC: enlarges a picture on the TV screen.

9 TV VOL +-

– Adjusts TV volume (Philips TV only).

0 SLEEP

– Sets the sleep timer function.

! SURR

– Selects multichannel surround or stereo

mode.

3139 115 2xxx1

@ Numeric Keypad (0-9)

– DISC: enters a track/title number. – TUNER: enters the preset radio station

number.

# DISC MENU

– DISC: enters or exits disc contents menu.

For VCD, selects various preview function.

$ DISPLAY

– DISC: displays the current status or disc

information.

% OK

– Confirms a selection.

^ PLAYÉ

– DISC: starts playback.

& STOPÇ

– Exits an operation. – DISC: stops playback. – DISC: holding down the button will open

or close the disc tray.

– TUNER: *erases a preset radio station.

* AUDIO

– DISC: selects an audio language (DVD/

VCD) or an audio channel.

( SUBTITLE

– DISC: selects a subtitle language.

Remote Control (continued)

English

$ %

^ &

* ( )

¡ ™

) REPEAT

– DISC: selects various repeat modes;

switches repeat mode off.

¡ MUTE

– Mutes or restores the volume.

™ SOUND

– Selects a predefined sound effect.

£ PROG

– DISC: starts programming. – TUNER: starts *automatic/ manual preset

programming.

* = Press and hold the button for more than two seconds.

001-045-hts3050-16-Eng2 4/1/06, 3:14 PM15

3139 115 2xxx1

Getting Started

English

Step 1: Inserting batteries into

the remote control

1 Open the battery compartment. 2 Insert two batteries type R06 or AA,

following the indications (+-) inside the compartment.

3 Close the cover.

CAUTION! – Remove batteries if they are exhausted or if the remote control is not to be used for a long time. – Do not use old and new, or different types of batteries in combination. – Batteries contain hazardous chemical substances, so they should be disposed of properly.

Using the remote control to operate the system

1 Aim the remote control directly at the

remote sensor (iR) on the front panel.

2 Select the source you wish to control by

pressing one of the source select buttons on the remote control (for example TV, TUNER).

3 Then select the desired function (for

example É, S, T).

Step 2: Switching on the

DVD system

● Press the SOURCE control to select :

DISC ™ FM ™ MW ™ TV ™ AUX

™ DISC ....

Press DISC, TV, TUNER or AUX/DI on the remote.

Switching to Eco Power standby mode

● Press STANDBY ON (B).

➜ The display screen will go blank.

Step 3: Setting the TV

After connecting the DVD system to your TV, you have to switch the TV to the correct programme number for the input socket (e.g. ‘EXT’, ‘0’, ‘AV’) in order to view the playback from the DVD system.

1 Press SOURCE control until “DISC”

appears on the display panel.

2 Turn on the TV and set it to the correct

video-in channel. You should see the blue DVD background screen on the TV.

➜ Usually this channel is between the

lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV manual for more details.

➜ Or, you may go to channel 1 on your

TV, then press the Channel down button repeatedly until you see the Video In channel.

➜ Or, the TV remote control may have a

button or switch that chooses between different video modes.

001-045-hts3050-16-Eng2 4/1/06, 3:15 PM16

3139 115 2xxx1

Getting Started (continued)

Video Setup Page

TV Type TV Display Picture Setting

4:3 Pan Scan 4:3 Letter Box 16:9 Wide Screen

Selecting the matching colour system

The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV.

1 In disc mode, press SETUP. 2 Press 2 repeatedly to select { Video Setup

Page }.

3 Press 34 to highlight { TV Type }, then

press 2.

Video Setup Page

TV Type TV Display Picture Setting

PAL NTSC Multi

4 Press 34 to highlight one of the options

below:

PAL }

{

Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.

{ NTSC }

Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.

{ Multi }

Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

5 Select a setting and press OK.

➜ Follow the instructions shown on the

TV to confirm the selection (if any).

➜ If a blank/distorted TV screen appears,

wait for 15 seconds for the auto recovery.

Setting the TV Display

Set the aspect ratio of the DVD system according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

1 In disc mode, press SETUP. 2 Press 2 repeatedly to select { Video Setup

Page }.

3 Press 34 to highlight { TV Display },

then press 2.

4 Press 34 to highlight one of the options

below:

4:3 Pan Scan }

{

Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

{ 4:3 Letter Box }

Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

{ 16:9 Wide Screen }

Select this if you have a widescreen TV.

5 Select a setting and press OK.

English

001-045-hts3050-16-Eng2 4/1/06, 3:15 PM17

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

3139 115 2xxx1

Getting Started (continued)

English

Step 4: Setting language

preferences

You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.

The OSD (On-Screen Display) language for the system menu will remain as you set it, regardless of the default and optional disc languages.

On-screen display (OSD) language

1 In disc mode, press SETUP. 2 Press 2 to select { General Setup Page }. 3 Press 34 to highlight { OSD Language },

then press 2.

enera

l Se

tup

age

isc

ispla

rogram

OSD L

nguag

nglis

spa

cree

ave

X(R) VOD

nõl

rançais

ort

uguês

Audio, Subtitle and Disc menu languages

1 Press Ç twice to stop playback (if any),

then press SETUP.

2 Press 2 repeatedly to select

{ Preference Page }.

3 Press 34 to highlight one of the options

below, then press 2. –{ Audio } (disc’s soundtrack) –{ Subtitle } (disc’s subtitles) –{ Disc Menu } (disc’s menu)

Preference Page

Audio Subtitle Disc Menu Parental PBC MP3/JPEG Nav Password DivX Subtitle Default

4 Press 34 to select a language and press

OK to confirm.

If the language you want is not in the list, then select { Others }.

Use the numeric keypad (0-9) on the remote to enter the 4-digit language code ‘XXXX’ (see page 5) and press OK to confirm.

4 Press 34 to select a language and press

OK to confirm.

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

001-045-hts3050-16-Eng2 4/1/06, 3:16 PM18

5 Repeat steps 3~4 for other settings.

3139 115 2xxx1

Disc Operations

IMPORTANT! – If the inhibit icon (ø or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.

Playable discs

SUPER VIDEO

Your DVD home theatre system will play:

– Digital Versatile Discs (DVDs) – Video CDs (VCDs) – Super Video CDs (SVCDs) – Finalised DVD+Recordable[Rewritable]

(DVD+R[W]) – Audio Compact Discs (CDs) – MP3 discs, Windows Media™ Audio discs,

picture (Kodak, JPEG) files on CD-R(W).

– JPEG/ISO 9660/UDF format

– Progressive JPEG

– JPEG resolution support up to

3072 x 2048

– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz

– Supported Bit-rates : 32~256 (kbps),

variable bit rates

– DivX disc on CD-R[W]/DVD+R[W]:

– DivX 3.11, 4.x and 5.x

– GMC (Global Motion Compensation)

and QP (Quarter Pixel) not supported.

Region Codes

The regional code ‘X’ (denotes the number) of this device is shown at the back panel of this device. If the DVD is marked with a different region code, it cannot be played on this device.

Helpful Hints: – It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or condition of the recording. – If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this DVD system.

Playing discs

1 Press SOURCE control until “DISC”

appears on the display panel (or press DISC on the remote).

2 Turn on the TV power and set to the

correct Video In channel. (See page 16 “Setting the TV”).

➜ You should see the blue DVD

background screen on the TV.

3 Press OPEN CLOSE 0 to open the

disc tray and load a disc, then press the same button again to close the disc tray.

➜ Make sure the disc label is facing up.

For double-sided discs, load the side you want to play facing up.

4 Playback will start automatically.

➜ If a disc menu shows on the TV, see

page 21 “Using the Disc Menu”.

➜ If the disc is locked by parental control,

you must enter your six-digit password. (See pages 33-34).

ALL

English

TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics

001-045-hts3050-16-Eng2 4/1/06, 3:16 PM19

of the disc, or due to the condition of recording and authoring software that was used.

3139 115 2xxx1

Disc Operations (continued)

English

Auto Eco Power standby mode

This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing.

Basic playback controls

Pausing playback

● During playback, press 2; (or ; on the

remote).

➜ To resume normal playback,

press 2; (or PLAY B on the remote).

Selecting another track/chapter

● Press S / T or use the numeric

keypad (0-9) to key in a track/chapter

number.

➜ If repeat track mode is active, pressing

S / T will replay the same track/ chapter.

Searching backward/forward

● Press and hold S / T.

To resume normal playback, press 2; (or PLAY B on the remote).

➜ While searching, pressing S / T

again will decrease/increase the search speed.

Selecting various repeat/ shuffle functions

● While playing a disc, press REPEAT on

the remote repeatedly to choose a repeat play mode.

DVD

™ RPT ONE (repeat chapter) ™ RPT TT (repeat title) ™ SHUFFLE (random play) ™ RPT SHF (repeat random play) ™ RPT OFF (exit repeat mode)

VCD/SVCD/CD

™ RPT ONE (repeat track) ™ RPT ALL (repeat disc) ™ SHUFFLE (random play) ™ RPT SHF (repeat random play) ™ RPT OFF (exit repeat mode)

MP3/DivX/Windows Media™ Audio

™ RPT ONE (repeat track) ™ RPT ALL/FLD (repeat folder) ™ SHUFFLE (random play) ™ RPT OFF (exit repeat mode)

Helpful Hint: – VCDs do not allow repeat playback as long as the PBC mode is switched on.

Stopping playback

● Press Ç.

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

001-045-hts3050-16-Eng2 4/1/06, 3:16 PM20

3139 115 2xxx1

Disc Operations (continued)

Title Elapsed

Subtitle

Audio

Off

Other operations for video playback (DVD/VCD/SVCD)

DISC MENU

DISPLAY

AUDIO

SUBTITLE

Using the Disc Menu (DVD only)

A menu may appear on the TV screen once you load in the disc, depending on the disc format.

To select a playback feature or item

● Use 1 2 3 4 keys or numeric keypad

(0-9) on the remote, then press OK to

start playback.

To access or remove the menu

● Press DISC MENU on the remote.

PLAY

ZOOM

Viewing playback information

It will show the disc playback information (for example, title or chapter number, elapsed playing time, audio/subtitle language), a number of operations can be done without interrupting disc playback.

1 During playback, press DISPLAY.

➜ A list of available disc information

appears on the TV screen.

Repeat

Off Total Elapsed

Total Elapsed

2 Use 34 keys to view the information and

press OK to access.

3 Use the numeric keypad (0-9) to input

the number/time or use 34 keys to make the selection, then press OK to confirm.

➜ Playback will change to the chosen

time or to the selected title/chapter/ track.

English

TIPS: The operating features described here might not be possible for certain discs.

001-045-hts3050-16-Eng2 4/1/06, 3:16 PM21

Always refer to the instructions supplied with the discs.

3139 115 2xxx1

Disc Operations (continued)

English

Advancing by frame

1 During playback, press Å on the remote.

➜ Play will pause and sound will be

muted.

2 Press Å repeatedly to view the next

picture frame.

3 To resume normal playback, press

PLAY B.

Resuming playback from the last stopped point

This DVD system able to resume disc playback from its last stopped point (only possible for the last 10 discs that recorded without a menu).

1 Load one of the last played 10 discs. 2 While “LOADING” appears on the display

panel, press PLAY B (or 2;) to start playback from the last stop point.

To cancel the resume mode

● In stop mode, press Ç again.

Changing sound track language

This operation works only on DVDs with multiple soundtrack languages, you can change the language you want while playing a DVD.

● Press AUDIO repeatedly to select the

available audio languages.

For VCD - changing the audio channel

● Press AUDIO repeatedly to select the

available audio channels provided by the disc (STEREO, MONO LEFT, MONO RIGHT or MIX MONO).

Changing subtitle language (DVD only)

This operation works only on DVDs with multiple subtitle languages, you can change the language you want while playing a DVD.

● Press SUBTITLE repeatedly to select

different subtitle languages.

Zooming in

This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture.

1 During playback, press ZOOM

repeatedly to select a different zoom factor.

➜ Use 1 2 3 4 keys to move through

the zoomed image.

➜ Playback will continue.

2 Press ZOOM repeatedly to return to

the original size.

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

001-045-hts3050-16-Eng2 4/1/06, 3:16 PM22

3139 115 2xxx1

Disc Operations (continued)

Preview Function (VCD/SVCD only)

1 Press DISC MENU. 2 Use 34 keys to highlight { Track Digest },

{ Disc Interval } or { Track Interval }.

3 Press OK to open one option.

Select Digest Type:

Track Digest

Disc Interval Track Interval

{ Track Digest } This function will minimise the picture of every track in order to display every six of these tracks on the screen to help you know the content of every track on the disc.

{ Disc Interval } This function is used to divide a disc into six parts by regular intervals and display them on one page to preview the whole disc.

{ Track Interval } This function is used to divide a single track into six parts by regular intervals and display them on one page to help you preview the selected track.

4 Use 1 2 3 4 keys to select a track. 5 Press S / T to open the previous

or next page.

6 Press OK to confirm.

To quit preview function

● Use 1 2 3 4 keys to highlight { Exit }

and press OK to confirm.

To return to preview menu

● Use 1 2 3 4 keys to highlight { Menu }

and press OK to confirm.

English

01 02 03

04 05 06

Exit Menu

(example for 6 thumbnail pictures display)

TIPS: The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

001-045-hts3050-16-Eng2 4/1/06, 3:17 PM23

3139 115 2xxx1

Disc Operations (continued)

English

Playing an MP3/Windows Media™ Audio/JPEG disc

This DVD system can playback MP3, Windows Media™ Audio, JPEG, VCD & SVCD files on a personally recorded CDR/RW disc or commercial CD.

IMPORTANT!

You have to turn on your TV and set to the correct Video In channel. (See page 16 “Setting the TV”).

1 Load a disc.

➜ The disc reading time may exceed 30

seconds due to the complexity of the directory/file configuration.

➜ The disc menu appears on the TV

screen.

00:19 04:39 001/003

\MP3_files_128kbs

Picture 1

Picture 2

MP3 Music 1

MP3 Music 2

050 003 000

2 If the disc main menu contains various

folders, use 34 keys to select a desired folder and press OK to open the folder.

3 Use 3 4 keys to select a track/file and

press OK to start playback.

➜ Playback will start from the selected

file and continue to the end of the folder. During playback, you can;

● Press S / T to select another

track/file in the current folder.

● Press 1 / 2 to fast reverse/forward

search a music track.

● To select another folder from the current

disc, press 3 to return to the root menu, then use 34 keys to make your selection and press OK to confirm.

● Press REPEAT continuously to access

various play mode.

● Press Å to pause or PLAY B to

resume playback.

Playing MP3 music and JPEG picture simultaneously

1 Load a MP3 disc that contains music and

pictures.

➜ The disc menu appears on the TV

screen.

2 Select an MP3 track and press 2; (or

PLAY B on the remote) to start playback.

3 During MP3 music playback, use 1 2 3 4

keys to select a picture folder from the disc menu and press 2; (or PLAY B).

➜ The picture files will be played back

until the end of the folder.

4 To quit simultaneous playback, press

DISC MENU and followed by Ç.

Helpful Hints: – It may not be possible to play certain MP3/JPEG/DivX disc due to the configuration and characteristics of the disc or condition of the recording. – It is normal to experience an occasional “skip” while listening to your MP3 disc. – It is normal to experience an occasional pixelation during DivX playback due to poor clarity of digital contents during internet downloading. – For multi-session discs with different formats, only the first session will be available.

TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics

of the disc, or due to the condition of recording and authoring software that was used.

001-045-hts3050-16-Eng2 4/1/06, 3:17 PM24

3139 115 2xxx1

Disc Operations (continued)

Playing a picture disc (slide show)

IMPORTANT!

You have to turn on your TV and set to the correct Video In channel. (See page 16 “Setting the TV”).

● Load a Picture disc (Kodak Picture CD,

JPEG).

➜ For a Kodak disc, the slide show will

begin automatically.

➜ For a JPEG disc, the picture menu will

appear on the TV screen. Press 2; (or PLAY B) to start the slide-show playback.

Preview Function

This function shows the content of the current folder or the whole disc.

1 During playback, press Ç.

➜ 12 thumbnail pictures will appear on

the TV screen.

2 S T

Zoom picture

1 During playback, press ZOOM

repeatedly to select different zoom factor.

2 Use 1 2 3 4 keys to move through the

zoomed image.

Rotating/Fliping the picture

● During playback, use 1 2 3 4 keys to

rotate/flip the picture on the TV screen.

: flip the picture vertically

3 4

: flip the picture horizontally

1 : rotate the picture anti-clockwise 2

: rotate the picture clockwise

Supported JPEG picture formats

File format:

– The file extension has to be '*.JPG' and not '*.JPEG'. – It can only display DCF-standard still pictures or JPEG pictures e.g. TIFF. It cannot play back moving pictures, Motion JPEG, and other formats, or pictures in formats other than JPEG, or pictures associated with sound. – It may require longer time for the DVD system to display the disc content on the TV due to the large number of songs/pictures compiled into one disc.

English

2 Press S / T to display the other

pictures on the previous/next page.

3 Use 1 2 3 4 keys to highlight one of the

picture and press OK to start playback.

4 Press DISC MENU to return to Picture

CD menu.

TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics

001-045-hts3050-16-Eng2 4/1/06, 3:17 PM25

of the disc, or due to the condition of recording and authoring software that was used.

3139 115 2xxx1

Disc Operations (continued)

English

Playing a DivX disc

This DVD system supports the playback of DivX movie which you download from your computer onto a CD-R/RW (see page 29 for more information).

1 Load a DivX disc. 2 If the DivX movie contains external

subtitles, the subtitle menu will appear on the TV for your selection.

● In this case, pressing SUBTITLE on the

remote control will turn on or off the subtitle display.

3 Press 2; (or PLAY B) to start playback.

● If multilingual subtitles are embedded on

the DivX disc, you can press SUBTITLE to change the subtitle language while playing.

● During playback, pressing 1 / 2 will

perform fast reverse/forward search.

Helpful Hints: – Subtitle files with the following filename extensions (.srt, .smi, .sub, .ssa, .ass) are supported but do not appear on the file navigation menu. – The subtitle filename has to be the same as the filename of the movie. – The subtitle can only be displayed up to maximum of 45 characters.

TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics

001-045-hts3050-16-Eng2 4/1/06, 3:17 PM26

of the disc, or due to the condition of recording and authoring software that was used.

3139 115 2xxx1

+ 60 hidden pages

Philips HTS3050 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual