Philips HTL5145B/12 user manual

Always there to help you

Question?

Contact

Philips

Register your product and get support at

www.philips.com/support

HTL5145B

User manual

Contents

1 Important 2

Safety 2
Care for your product 3
Care of the environment 3
Compliance 3
Help and support 3

2 Your SoundBar 4

Main unit 4
Remote control 4
Connectors 5
Wireless subwoofer 6

3 Connect and set up 6

Place subwoofer 6
Pair up with the subwoofer 7
Connect to TV 7
Connect digital devices through HDMI 8
Connect audio from TV and other devices 8

4 Use your SoundBar 9

Adjust the volume 9
Choose your sound 9
Play audio through Bluetooth 10
Connect Bluetooth via NFC 10
MP3 player 11
USB storage devices 11
Auto standby 11
Set display brightness 11
Apply factory settings 12

8 Troubleshooting 15

5 Update software 12

Check software version 12
Update software via USB 12

6 Wall mount 13

7 Productspecications 14

1EN

1 Important

Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.

Safety

Riskofelectricshockorre!

• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation
slots or other openings on the product.

• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.

• Disconnect the product from the power
outlet before lightning storms.

• When you disconnect the power cord,
always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.

Riskofinjuryordamagetothisproduct!

• Never place the product or any objects
on power cords or on other electrical
equipment.

• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.

• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.

Riskofoverheating!

• Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or
carbon and alkaine, etc.).

• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.

• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.

• Batteries contain chemical substances, they
should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.

• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.

• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.

• If the battery compar tment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.

2 EN

This is CLASS II apparatus with double
insulation, and no protective earth provided.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.

This symbol on a product means that the
product is covered by European Directive
2012/19/EU.

This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment and
human health.

Removing the disposable batteries

To remove the disposable batteries, see battery
installation section.

Compliance

This product complies with the radio
interference requirements of the European
Community.
Hereby, Gibson Innovations declares that
this product is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC. You

can nd the Declaration of Conformity on

www.p4c.philips.com.

Help and support

For extensive online support, visit
www.philips.com/support to:

• download the user manual and the quick
start guide

• watch video tutorials (available only for
selected models)

• nd answers to frequently answered
questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

3EN

2 Your SoundBar

b

a

c
d

f
g
h
i

j
k
l

e m

Remote control

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your
SoundBar at www.philips.com/support.

Main unit

This section includes an overview of the main
unit.

a (Standby-On/Standby indicator)

• Switch the SoundBar on or to standby.

• When the SoundBar is in standby, the

b SOURCE

c Display panel
d +/- (Volume)

e NFC tag

4 EN

standby indicator turns red.

Select an input source for the SoundBar.

Increase or decrease volume.

Tap the NFC-enabled device on the tag for
Bluetooth connection.

d ea b c

This section includes an overview of the
remote control.

a (Standby-On)

Switch the SoundBar on or to standby.

b Source buttons

• HDMI ARC: Switch your source to
HDMI ARC connection.

• HDMI IN: Switch your source to the
HDMI IN connection.

•

: Switch to Bluetooth mode.

• USB: Switch to USB mode.

• OPTICAL: Switch your audio source
to the optical connection.

• AUX: Switch your audio source to
the AUDIO IN or AUX connection
(3.5mm jack).