Philips HTL3110B/12 instructions for use

Always there to help you

Question?

Contact

Philips

Register your product and get support at

www.philips.com/support

HTL3110B

User manual

Contents

1 Important 2

Help and support 2
Safety 2
Care for your product 3
Care of the environment 3
Compliance 4

2 Your SoundBar 4

Main unit 4
Remote control 5
Connectors 6
Wireless subwoofer 6

3 Connect and set up 7

Pair up with the subwoofer 7
Placement 7
Connect to TV 7
Connect audio from TV and other devices 8

4 Use your SoundBar 9

Adjust the volume 9
Choose your sound 9
Play audio through Bluetooth 10
Connect Bluetooth via NFC 11
USB storage devices 11
Auto standby 12
Set display brightness 12
Apply factory settings 12

5 Update software 12

Check software version 12
Update software via USB 12

6 Wall mount 13

7 Productspecications 14

8 Troubleshooting 15

1EN

1 Important

Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.

Help and support

For extensive online support, visit
www.philips.com/support to:

• download the user manual and the quick
start guide

• watch video tutorials (available only for
selected models)

• nd answers to frequently answered
questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

Safety

Riskofelectricshockorre!

• Before you make or change any
connections, make sure that all devices are
disconnected from the power outlet.

• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation
slots or other openings on the product.

• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.

• Batteries (battery pack or batteries
installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power
outlet before lightning storms.

• When you disconnect the power cord,
always pull the plug, never the cable.

Riskofshortcircuitorre!

• For identication and supply ratings, see
the type plate at the back or bottom of
the product.

• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.

Riskofinjuryordamagetothisproduct!

• For wall mounting, this product must be
securely attached to the wall in accordance
with the installation instructions. Use
only the supplied wall mount bracket (if
available). Improper wall mounting may
result in accident, injury or damage. If you
have any query, contact Consumer Care in
your country.

• Never place the product or any objects
on power cords or on other electrical
equipment.

• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.

• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.

2 EN

Riskofoverheating!

• Never install this product in a conned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or
carbon and alkaine, etc.).

• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.

• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.

• Batteries contain chemical substances, they
should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.

• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.

• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.

• If the battery compar tment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.

This is CLASS II apparatus with double
insulation, and no protective earth provided.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.

This symbol on a product means that the
product is covered by European Directive
2012/19/EU.

This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment and
human health.

Removing the disposable batteries

To remove the disposable batteries, see battery
installation section.

3EN

Compliance

d ea b c

This product complies with the radio
interference requirements of the European
Community.
Hereby, Gibson Innovations declares that
this product is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC. You

can nd the Declaration of Conformity on

www.p4c.philips.com.

2 Your SoundBar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your
SoundBar at www.philips.com/welcome.

Main unit

This section includes an overview of the main
unit.

a (Standby-On/Standby indicator)

• Switch the SoundBar on or to standby.

• When the SoundBar is in standby, the
standby indicator turns red.

b SOURCE

Select an input source for the SoundBar.

c Display panel
d +/- (Volume)

Increase or decrease volume.

e NFC tag

Tap the NFC-enabled device on the tag for
Bluetooth connection.

4 EN

Remote control

b

a

c
d

f
g

h
i
j

e l

k

This section includes an overview of the
remote control.

c / (Previous/Next)

Skip to the previous or next track in USB
mode.

d (Play/Pause)

• Start, pause or resume play in USB
mode.

e BASS +/-

Increase or decrease bass.

f Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

g SOUND

Select a sound mode.

h SURROUND ON/OFF

Select surround or stereo sound.

i AUDIO SYNC +/-

Increase or decrease audio delay.

j DIM

Set the brightness of SoundBar display
panel.

k NIGHT

Turn night mode on or off.

l TREBLE +/-

Increase or decrease treble.

a (Standby-On)

• Switch the SoundBar on or to standby.

b Source buttons

HDMI ARC: Switch your source to HDMI

ARC connection.

: Switch to Bluetooth mode.

USB: Switch to USB mode.
AUX: Switch your audio source to the

AUX connection.
COAX: Switch your audio source to the
coaxial connection.
OPTICAL: Switch your audio source to
the optical connection.

5EN

Connectors

bd

Wireless subwoofer

This section includes an overview of the
connectors available on your SoundBar.

a

c

a

• Audio input from a USB storage
device.

• Upgrade software of this product.

• Charge a USB device.

b DIGITAL IN-COAXIAL

Connect to a coaxial audio output on the
TV or a digital device.

c AUX IN (L/R)

Connect to an analog audio output on the
TV or an analog device.

d DIGITAL IN-OPTICAL

Connect to an optical audio output on the
TV or a digital device.

e DC IN

Connect to the power supply.

f HDMI OUT (ARC) - TO TV

Connect to the HDMI input on the TV.

ef

The SoundBar comes with a wireless subwoofer.

a CONNECT (connect)

Press to to enter the pairing mode for the
subwoofer.

b Subwoofer indicator

• When the power is turned on, the
indicator lights up.

• During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.

• When the pairing succeeds, the
indicator lights up white.

• When the pairing fails, the indicator
blinks white slowly.

c AC MAINS~

Connect to the power supply.

6 EN

3 Connect and set

4 If the pairing fails, repeat the steps above.

up

This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Pair up with the subwoofer

The wireless subwoofer automatically pairs
up with the SoundBar for wireless connection
when you turn on the SoundBar and the
subwoofer.
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.

1 Turn on the SoundBar and the subwoofer.

» If the connection to the SoundBar is

lost, the indicator on the subwoofer
blinks white slowly.

2 Press the CONNECT (connect) button

on the subwoofer to enter the pairing
mode.

» The indicator on the subwoofer blinks

white quickly.

3 On the remote control, within six seconds

press twice then BASS + once, and then
hold down SURROUND ON.

» If the pairing succeeds, the indicator on

the subwoofer lights up white.

» If the pairing fails, the indicator on the

subwoofer blinks white slowly.

Placement

Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.

Connect to TV

Connect your SoundBar to a TV. You can listen
to audio from TV programs through your
SoundBar. Use the best quality connection
available on your SoundBar and TV.

Connect to TV through HDMI (ARC)

Your SoundBar suppor ts HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your SoundBar by using a single HDMI cable.

7EN

Option 1: Connect audio through a
digital optical cable

TV

Best quality audio

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC)-TO TV connector
on your SoundBar to the HDMI ARC
connector on the TV.

• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.

2 On your TV, turn on HDMI-CEC

operations. For details, see the TV user
manual.

Note

• If your TV is not HDMI ARC compliant, connect

an audio cable to hear the TV audio through your
SoundBar (see 'Connect audio from TV and other
devices' on page 8).

• If your TV has a DVI connector, you can use an HDMI/

DVI adapter to connect to TV. However, some of the
features may not be available.

Connect audio from TV and other devices

Play audio from TV or other devices through
your Soundbar speakers.
Use the best quality connection available on
your TV, Soundbar, and other devices.

TV

1 Using an optical cable, connect the

OPTICAL connector on your SoundBar to

the OPTICAL OUT connector on the TV
or other device.

• The digital optical connector might be
labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a
digital coaxial cable

Best quality audio

1 Using a coaxial cable, connect the

COAXIAL connector on your SoundBar

to the COAXIAL/DIGITAL OUT
connector on the TV or other device.

• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.

Note

• When your Soundbar and TV are connected through

HDMI ARC, an audio connection is not required. (see
'Connect to TV through HDMI (ARC)' on page 7)

8 EN

Option 3: Connect audio through
analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.

DVD

4 Use your

SoundBar

This section helps you use the SoundBar to play
audio from connected devices.

Before you start

• Make the necessary connections described
in the quick start guide and the user
manual.

• Switch the SoundBar to the correct source
for other devices.

Adjust the volume

1 Press +/- (Volume) to increase or decrease

a volume level.

• To mute sound, press (Mute).

• To restore the sound, press (Mute)

again or press +/- (Volume).

Choose your sound

This section helps you choose the ideal sound
for your video or music.

Sound mode

Select predened sound modes to suit your

video or music.

1 Press SOUND to select a sound option

from the display panel.

• AUTO: Automatically select a sound

setting based on the sound stream.

• POWERFUL: Enjoy thrilling arcade

sounds, ideal for action-packed videos
and loud parties.

• BALANCED: Experience the original

sound of your movies and music,
without added sound effects.

9EN

• BRIGHT: Spice up your dull movies
and music with added sound effects.

• CLEAR: Hear every detail in your
music and clear voices in your movies.

• WARM: Experience spoken words and
music vocals in comfort.

• PERSONAL: Personalize the sound
based on your preferences.

Surround sound mode

Experience an immersive audio experience with
surround sound modes.

1 Press SURROUND ON/OFF to turn

surround mode on or off.

• On: Create a surround listening
experience.

• Off: Two-channel stereo sound. Ideal
for listening to music.

Equalizer

Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.

1 Press TREBLE +/- or BASS +/- to change

the frequency.

Synchronize video and sound

If the audio and video are not synchronized,
delay the audio to match the video.

1 Press AUDIO SYNC +/- to synchronize

the audio with the video.

Night mode

For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.

1 Press NIGHT to turn night mode on or

off.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then

you can listen to the audio les stored on the

device through your SoundBar speakers.

What you need

• A Bluetooth device which supports

Bluetooth prole A2DP, AVRCP and with

Bluetooth version as 3.0 + EDR.

• The maximum operational range between
the SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).

1 Press on the remote control to switch

the SoundBar to Bluetooth mode.

» BT is displayed on the display panel,

blinking.

2 On the Bluetooth device, switch on

Bluetooth, search for and select PHILIPS
HTL3110B to start connection (see the

user manual of the Bluetooth device on
how to enable Bluetooth).

» During connection, BT on the display

panel blinks.

3 Wait until you hear a beep sound from the

SoundBar.

» When the Bluetooth connection

succeeds, BT is displayed on the display
panel.

» If the connection fails, BT on the

display panel blinks continuously.

4 Select and play audio les or music on

your Bluetooth device.

• During play, if a call is coming, music

play is paused. Play resumes when the
call ends.

• If your Bluetooth device supports

AVRCP prole, on the remote control

you can press / to skip to a track,
or press to pause/resume play.

10 EN

5 To exit Bluetooth, select other source.

• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.

Note

• The music streaming may be interrupted by obstacles

between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.

• If you want to connect your SoundBar with another

Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.

Connect Bluetooth via NFC

NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.

What you need

• A Bluetooth device with NFC function.

• For pairing, tap the NFC device on the

NFC tag of the SoundBar.

1 Enable NFC on the Bluetooth device (see

the device' s user manual for details).

2 Tap the NFC device on the NFC tag of

the SoundBar until you hear a beep sound
from the SoundBar.

» When the Bluetooth connection

succeeds, BT is displayed on the display
panel.

» If the connection fails, BT on the

display panel blinks continuously.

3 Select and play audio les or music on

your NFC device.

• To break the connection, tap again the
NFC device with the NFC tag on the
SoundBar.

USB storage devices

Enjoy audio on a USB storage device, such as an

MP3 player and USB ash memory, etc.

What you need

• A USB storage device that is formatted for

FAT or NTFS le systems, and complies

with the Mass Storage Class.

• An MP3 or WMA le on a USB storage
device

1 Connect a USB storage device to this

product.

2 Press USB on the remote control.
3 Use the remote control to control play.

Button Action

Start, pause or resume play.

/ Skip to the previous or next track.

USB During USB play, press repeatedly to

select a repeat or shufe mode, or

turn off a play mode.

Note

• This product supports WMA les which are converted

via Windows Media Player (WMA les converted via
other le format converters may not work).

• This product may not be compatible with certain types

of USB storage device.

• If you use a USB extension cable, USB HUB, or USB

multi-reader, the USB storage device may not be
recognized.

• Digital camera PTP and MTP protocols are not

supported.

• Do not remove the USB storage device while it is

being read.

• DRM-protected music les (MP3, WMA) are not

supported.

• Support a USB por t: 5V , 1A.

11EN

Auto standby

5 Update software

When playing media from a connected device,
the SoundBar automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.

Set display brightness

You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.

1 In any source mode, on the remote control

press Volume-, BASS -, and TREBLE - in
sequence within three seconds.

» When the factory settings restore is

complete, the product automatically
switches off and restarts.

To get the best features and suppor t, update
your product with the latest software.

What you need

• Connect this product to your TV through
HDMI.

Check software version

In HDMI ARC source mode, on the remote
control press TREBLE -, BASS -, and Volume- in
sequence.

Update software via USB

1 Check the latest software version on

www.philips.com/support.

• Search for your model and click on

"Software and drivers".

2 Download the software into a USB storage

device.

a Unzip the download if zipped, and

makesurethattheunzippedleis

named "HTL3110.BIN".

b Putthe"HTL3110.BIN"leinthe

root directory.

12 EN

3 Connect the USB storage device to the

(USB) connector on this product.

4 Switch this product to the HDMI ARC

source, and switch your TV to the HDMI
source.

5 On the remote control, within 6 seconds

press twice, and + (Volume) once, then
hold down SURROUND ON.

» If an upgrade media is detected, on the

TV screen you are prompted to start
the update.

» If an upgrade media is not detected,

> 25mm

3.5-4mm

an error message is displayed on the
TV screen. Make sure that the latest
software of this product is put in the
USB storage device.

6 Press to star t the update.
7 Wait until the update is completed.

» If the update is complete, this product

automatically turns off and on again.

Caution

• Do not turn off the power or remove the USB storage

device when the software update is in progress because
you might damage this player.

6 Wall mount

Note

• Improper wall mounting may result in accident, injur y or

damage. If you have any query, contact Consumer Care
in your country.

• Before wall mounting, make sure the wall can suppor t

the weight of your SoundBar.

• Before wall mount, you need not remove the four

rubber feet at the bottom of the SoundBar, otherwise

the rubber feet cannot be xed back.

Screw length/diameter

Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.

4mm

See the illustration in the quick start guide on
how to wall mount the SoundBar.

1) Drill two holes on the wall.

2) Secure the dowels and screws in the holes.

3) Hang the SoundBar on the fastening screws.

13EN

7 Product

• Version:

• WMA: V7, V8, V9

specifications

Note

• Specications and design are subject to change without

notice.

Amplier

• FTC total output power: 40W

• Left + Right: 25W (1%THD, 8ohm,
120Hz-20kHz)

• Subwoofer:
15W (1%THD, 4ohm, 30Hz-80Hz)

• RMS Total output power:
120W RMS (+/- 0.5 dB, 10% THD)

• Frequency response: 20 Hz-20 kHz / ±3 dB

• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)

• Input sensitivity:

• AUX: 900 mV

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class
(MSC)

• File system: FAT16, FAT32, NTFS

• Supports MP3 and WMA le formats

• Sampling frequency:

• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,

22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz

• WMA: 44.1 kHz, 48 kHz

• Constant bit rate:

• MP3: 8 kbps-320 kbps

• WMA: 32 kbps-192 kbps

Note

• This product supports WMA les which are converted

via Windows Media Player (WMA les converted via
other le format converters may not work).

Bluetooth

• Bluetooth proles: A2DP, AVRCP

• Bluetooth version: 3.0 + EDR

Main unit

• Power supply:

• Model (Philips branded AC power
adapter): DYS602-210309W;

AS650-210-AA309

• Input: 100-240 V~, 50/60 Hz 1.5 A

• Output: 21V , 3.09A

• Standby power consumption: ≤ 0.5 W

• Speaker impedance

• Woofer : 8 ohm

• tweeter: 16 ohm

• Speaker drivers: 2 x (90mm/3.5" x
34mm/1.3") woofer + 2 x 31mm/1.2"
tweeter

• Dimensions (W x H x D):
843 x 52 x 60 mm

• Weight: 1.4 kg

Subwoofer

• Power supply: 110-240 V~, 50-60 Hz

• Power consumption: 20 W

• Standby power consumption: ≤ 0.5 W

• Impedance: 4 ohm

• Speaker drivers: 1 x 134 mm (5.25")
woofer

• Dimensions (W x H x D):
226 x 251 x 306 mm

• Weight: 3.9 kg

14 EN

Remote control batteries

• 1 x AAA-R03-1.5 V

8 Troubleshooting

Standby power management

• When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.

• The power consumption in standby or
networked standby is less than 0.5W.

• To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.

• To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).

Warning

• Risk of electric shock. Never remove the casing of the

product.

To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.

Main unit

The buttons on the SoundBar do not work.

• Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.

Sound

No sound from SoundBar speakers.

• Connect the audio cable from your
SoundBar to your TV or other devices.
However, you do not need a separate
audio connection when the SoundBar and
TV are connected through HDMI ARC
connection.

• Make sure that you connect the audio
input on this product to the audio output
on your TV or other devices.

• Reset your SoundBar to its factory settings.

• On the remote control, select the correct
audio input.

• Make sure that the SoundBar is not muted.

No sound from the wireless subwoofer.

• Wirelessly connect the subwoofer to
the SoundBar (see 'Pair up with the
subwoofer' on page 7).

Distorted sound or echo.

• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.

15EN

Audio and video are not synchronized.

• Press AUDIO SYNC +/- to synchronize
the audio with the video.

Error message is displayed on the display
panel.

• When "ERROR" is displayed, it indicates
that an input audio format is not
supported.

• When "USB ERROR" is displayed, it
indicates that the connected USB device is
not supported.

• When "HDMI ARC" blinks, it indicates
that the connected TV is not HDMI ARC
compliant or an unsupported audio format
is detected.

Bluetooth

A device cannot connect with the SoundBar.

• The device does not support the

compatible proles required for the

SoundBar.

• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.

• The device is not correctly connected.
Connect the device correctly.

• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.

Quality of audio play from a connected
Bluetooth device is poor.

• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.

The connected Bluetooth device connects and
disconnects constantly.

• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.

• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.

• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundBar.

NFC

A device cannot connect with the SoundBar
via NFC.

• Make sure that the device is supported by
NFC.

• Make sure that NFC is enabled on the
device (see the device' s user manual for
details).

• For pairing, tap the NFC device on the
NFC tag of the SoundBar.

16 EN

Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition

Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.

The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
is under license. Other trademarks and trade
names are those of their respective owners.

The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.

17

Specicationsaresubjecttochangewithoutnotice

2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and
Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.

HTL3110B_12_UM_V1.0