Philips HT53365 User Manual

3

Enjoy

What’s in the box?

Start disc playback

A Press ç to open the disc tray.

B Place a disc with the disc label facing up.
C Press ç to close the disc tray.
D Playback starts automatically.
E If the disc menu appears on the TV, use  

keys or the numeric keypad to select an option in
the menu and press OK to start playback.

z

To enjoy the powerful surround sound

from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.

F Press



to stop playback.

Note When you press u button,
playback resumes from where it last stopped.
To start playback from the beginning, you
have to press

.

Playback other supported
devices

MIC LEVEL

MP3 LINK

MIC

USB device

A Insert your USB device to the USB socket.
B Press USB to switch to ‘USB’ mode.
C Press u to start playback.
D To stop playback, press DISC to switch to ‘DISC’

mode. You can unplug your USB device now.

MIC LEVEL

MP3 LINK

MIC

Other portable audio player

A Use a 3.5mm stereo audio cable (not supplied) to

connect the headphone output socket on your
portable audio player to MP3 LINK socket.

B Press PLAY on your portable audio player.
C Press AUX (MP3 LINK) repeatedly until

‘MP3 LINK’ is displayed, to listen to the playback.

Main Unit

Remote Control

and 2 batteries

User

Manual

1 centre, 2 front, 2 rear speakers

and subwoofer

Need help?

User Manual

See the user manual that came with your Philips DVD Home Theatre System.

2008 C Koninklijke Philips N.V.
All rights reserved.

www.philips.com

Composite
video cable

HDMI cbale

Register your product and get support at

www.philips.com/welcome

Quick Start Guide

Connect

Set up

Enjoy

1

2

3

HTS3365

Round-to-Flat

pin adaptor

(for Latam countries only)

AM/MW

loop antenna

FM wire antenna

MIC LEVEL

MIC

MP3 LINK

MIC LEVEL

MIC

MP3 LINK

hts3365_55-77-78_qsg_eng3_final81 1hts3365_55-77-78_qsg_eng3_final81 1 2008-02-13 11:07:42 AM2008-02-13 11:07:42 AM

1

Connect

A

Placement

Proper speakers system placement is important to
ensure optimum sound performance.

A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre

away from the TV.

C Place the front speakers at equal distances from the

TV.

D Place the rear speakers at the back or beside the

listening position.

B

Connect the main unit to TV

VIDEO IN

(CVBS)

z

Use the supplied composite video cable to connect

the CVBS socket on the main unit to the VIDEO IN
socket on your TV.

Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.

2

Set up

C

Connect the speakers and subwoofer

Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.

A

Finding the viewing channel

A Press 2 (Standby-On) on the main unit to turn it

on.

B Turn on the TV. Use the TVs remote control to

select the correct viewing channel.

Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote

control repeatedly (or AV, SELECT,

° button) until

you see the Video In channel.

B

Select the display language on the
screen

A Press OPTIONS.

The { General Setup } appears.

B Press



.

Press OPTIONS to exit menu

General Setup

Disc Lock

Display Dim

OSD Language

Screen Saver

DivX(R) VOD Code

Sleep

Español

English

Auto

Brazil Por

C Use  keys to select { OSD Language } and press

.

D Use  keys to select a language option in the

menu and press OK to confirm.

E Press OPTIONS to exit.

Note The language set here is only for the menus

that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.

There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.

D

Connect the radio antennas and

power cable

Keep the antennas away from the electronic devices to
prevent unwanted interference.

A Connect the FM antenna (supplied) to the inner pin

of the FM 75  socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.

B Unfold the AM/MW loop antenna (supplied) and fix

the claw into the slot.

C Press on the AM/MW tabs and insert the wires into

the sockets.

D Connect the power cable from the main unit to the

AC power outlet.

E

Connect audio output from TV

(optional)

To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.

AUDIO

OUT

Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until ‘AUX 1’ or ‘AUX 2’ is displayed to get the
sound output from the speakers.

Main Unit (rear)

Television (rear)

Main Unit (rear)

Main Unit (rear)

FM antenna

SUBWOOFER

FRONT

RIGHT

FRONT

LEFT

REAR

RIGHT

REAR

LEFT

FRONT CENTER

Main Unit (rear)

Main Unit (Front)

Standby button

TV (rear)

AM/MW antenna

REAR

LEFT

FRONT
LEFT

REAR
RIGHT

CENTER

FRONT
RIGHT

SUBWOOFER

A

D

C

B

AM/
MW

VIDEO IN
(CVBS)

AM/
MW

AUDIO OUT

AUDIO
OUT

AUDIO IN

AM/
MW

hts3365_55-77-78_qsg_eng3_final82 2hts3365_55-77-78_qsg_eng3_final82 2 2008-02-13 11:07:50 AM2008-02-13 11:07:50 AM