Philips HR2828AC Service Manual
Juice extractor
HR 2828
/AC
/DC
Philips Domestic Appliances and Personal Care
Service Manual 4322 277 00058 is herewith cancelled
Service Manual
PRODUCT INFORMATION
No parts should be washed in a dishwashing machine.
Motor : Series wound
Statically and dynamically
balanced
Self- lubricated bearings
Power : 250 W
Voltage : 110 - 120 V / 50 - 60 Hz
127 V / 60 Hz
220 - 230 V / 50 - 60 Hz
230 - 240 V / 50 - 60 Hz
Speed unloaded : 13.000 - 15.000 rpm
Cord length : 110 cm
Weight appliance : 2300 gr
Dimensions appliance : 27 x 20 x 28 cm
Colour appliance : white
Capacity juice can : 600 ml
item 1
The drive coupling has been screwed onto the rotor shaft by
means of a left-handed thread.
The drive coupling can be disconnected from the rotor shaft
without opening the appliance by fi rst removing the lid of the
housing (item 12) and then using the slot in the rotor shaft to
block the rotor (see drawing).
1
2
3
item 2
The following spacers have been placed on the rotor shaft:
SERVICE INFORMATION
The Service Manual for version HR 2828/AC code number
4322 277 00058, has been replaced by this Manual which
included the /DC version.
The parts with item nos. 15 and 20 have been modifi ed for
safety reasons and are not interchangeable with the spare
parts of the previous /AC version, only as a set.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Material outer diam.
metal 14 (opt. to adjust grater)
metal 14
metal 12.5
synthetic 13 (opt. to adjust motor gap 0.5 ± 0.2)
synthetic 13
synthetic 10
synthetic 13
See drawing for place of spacers on shaft.
The correct tolerance between feeding tube and grater is
1.3 + 0.8 mm.
4322 277 00390
00/10
This product meets the requirements regarding interference suppression on radio and TV.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.
1 4206 136 49210 Coupling assy
2 not available Spacers on rotor shaft
3 4206 133 09140 Switch
4 9965 000 01037 Choke coil
5 4822 276 31591 Wire connector for two wires
9965 000 01056 Wire connector for three wires
6 9965 000 01057 Capacitor
7 4206 100 02030 Cord set Euro plug
4206 100 01850 Cord set Mexico / Taiwan
4206 100 02010 Cord set Argentina
4206 100 02050 Cord set Hong Kong / UK
4206 100 02060 Cord set Korea
4206 100 02080 Cord set China
8 4206 136 50050 Motor assy 110 - 120 V
4206 136 50060 Motor assy 127 V
4206 136 50080 Motor assy 220 - 230 V RIS
4206 136 50100 Motor assy 230 - 240 V RIS
9 4206 136 46180 Cushion set
10 4206 133 53190 Cushion
11 4206 136 50320 Housing assy
12 4206 133 86960 Lid of housing assy
13 4206 136 49220 Sieve assy
14 4206 133 92870 Pulp container
15 4206 136 51590 Jar assy
16 4206 133 90870 Rod
17 4822 479 30178 Cleaning brush
18 4206 133 90810 Pusher
19 4206 133 90820 Tray
20 4206 136 51600 Cover assy
110-120 V / 50-60 Hz
AC
127 V / 60 Hz
220-230 V / 50-60 Hz
240 V / 50-60 Hz
M
SW
L
AC
220-230 V / 50-60 Hz
240 V / 50-60 Hz
L
M
CR
SW
SW = Switch
M = Motor
R = Resistor
L = Choke coils
C = Capacitor
(3.3 MΩ ½ W)
(18 µH)
(0.1 µF)
Loading...