Philips HR237506 User Manual
Always there to help you
Question?
Contact
Philips
Register your product and get support at
www.philips.com/welcome
HR2357/06
User manual 3 用户手册 28
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.Philips.com/welcome.
Read this user manual carefully before you install and use the unit. Save it
for future reference.
What's in the box
Main unit
User manual Recipe book
Flour cup
2 ENGLISH
Water cup
Flat cleaning tool
Lasagna/
Dumpling
Penne
Spaghetti -
Assembled on
the appliance
upon purchase
Fettuccine
Shaping
discs
Cleaning tool
Use the flat
cleaning tool
Use the flat
cleaning tool
Contents
What's in the box ���������������� 2
Important ��������������������� 4
Overview ����������������������6
Disassembling and cleaning
before first use ������������������ 8
Assembling ������������������� 10
Using the pasta and noodle maker ��� 12
Cleaning ��������������������� 18
Troubleshooting ���������������� 21
Product information ������������� 23
Recycling��������������������� 23
Warranty and service ������������ 24
ENGLISH 3
Safety
•
Important
Warning
•
Before you connect the appliance to the power, make sure that the
voltage indicated on the bottom of the appliance corresponds to
the local power voltage.
•
Make sure that your hands are dry before you insert the plug into
the power outlet.
•
Make sure that the plug is firmly inserted into the power outlet.
•
Never connect this appliance to a timer switch.
•
Before you insert the plug into the power outlet, make sure that
the appliance is assembled correctly.
•
If the power cord, the plug, or other parts are damaged, do not use
the appliance.
•
If the power cord is damaged, you must have it replaced by Philips,
a service center authorized by Philips or similarly qualified persons
to avoid a hazard.
•
Do not replace parts of the appliance yourself.
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instructions concerning use of the appliance by a
person responsible for their safety.
•
For their safety, do not allow children to play with the appliance.
Keep the appliance and its power cord out of the reach of children.
•
To prevent any accidents, do not use the appliance if it is damaged
for any reason.
Read this user manual carefully
before you use the appliance,
and save it for future reference.
EMF
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
4 ENGLISH
Caution
•
Before using the appliance for the first time, disassemble and wash
the accessories thoroughly (see “Disassemble and cleaning before
first use” section.)
•
The appliance is intended for household use only.
•
Do not use this appliance on an unstable or uneven surface.
•
Keep the appliance and its power cord out of the reach of children.
•
Do not disconnect the power cord before processing is complete.
If you have to stop processing, disconnect the power cord before
you perform other operations.
•
To better protect the lifetime of the appliance, we recommend
the continuous working time to be less than 45 minutes. You can
restart using the appliance after 15 minutes.
•
If you intend to use the appliance continuously, clean the shaping
disc with the supplied cleaning tool each time after use. For
cleaning ease, do not soak the shaping disc into the water directly.
•
Do not bend the power cord forcibly, jerk, twist, bundle nor put
under heavy items.
•
Do not put metal or flammable objects in the mixing chamber.
•
Unplug the appliance when not in use.
•
Do not use the appliance near flammable objects such as table
cloth or drapes.
•
Pull out the power plug immediately when you detect smoke.
•
When unplugging the power cord, do not pull the cable but grab
the plug part.
•
Keep the power plug clean.
•
Do not put heavy objects on the appliance.
•
This appliance is designed as consumer kitchen appliance. Do not
use for any other purpose
•
Do not move the appliance while it is operating.
•
Disconnect the power and remove the power cord before cleaning
or disassembling this appliance.
•
Do not immerse the main unit in water.
•
Place the appliance in a dry and well ventilated place after use.
•
To prevent a short circuit or an electric shock, do not pour water or
any liquid into the safety switch.
•
Do not use a dishwasher to clean the machine or the accessories.
ENGLISH 5
Overview
Mixing
chamber
chamber
lid
6 ENGLISH
Mixing
Mixing
paddle
Disc
holder
Disc holder
safety switch
lever
Shaping
discs
Front
panel
Front panel
knobs
Abbreviations
g = grams
~
= approximately
ml = milliliters
mm = millimeters
kg = kilogram
in = inch
Control panel
display
Power cord
Safety switch hole of
the mixing chamber lid
Disc holder safety switch
Program button - select the extrusion-only
program
Servings button - select
1-2 servings or
servings of fresh pasta/noodle.
Power on/
off button
or automatic program .
to make ~ 300g,
to make ~ 600g, 3-4
Program
button
Display
screen
Servings
button
Start/
pause
button
Main unit
Shaping discs storage
ENGLISH 7
Disassembling
and cleaning
before first use
Important
•
Before using the appliance for the first time, remove and safely
discard any packaging material and /or promotional labels.
•
Take out all the parts and accessories, wash and thoroughly dry all
parts and accessories (see "Cleaning" section).
•
Do not use water to rinse or soak the main unit.
•
Do not use a scourer or similar cleaners as these will scratch the
plastic surface and affect the lifetime of the pasta and noodle maker.
•
This appliance is intended for household use only.
Remove the mixing chamber lid from the
1
appliance.
Loosen the front panel control knobs.
2
Note:
•
The front panel is heavy. Take extra caution
when removing it.
8 ENGLISH
Disassemble the front panel, the shaping disc, the shaping disc holder,
2
3
4
5
1
3
the mixing paddle, and the mixing chamber in order.
Clean all detachable parts, and wipe them dry.
4
ENGLISH 9
Assembling
1
2
Follow below assembling steps to
install the pasta and noodle maker.
Important
•
Make sure to tighten the front panel knobs during assembly.
•
Make sure the appliance is not plugged in when assembling the
appliance.
Push the mixing chamber into the
1
appliance.
Point the mixing paddle to the hole in
2
the main unit. Insert the mixing paddle
all the way into the main unit.
Attach the disc holder onto the
3
appliance.
Disc holder safety switch
❶
Disc holder safety switch lever
❷
Note:
•
Check that the safety switch ❶ and
safety switch lever ❷ are set as shown
in the illustration to the right.
10 ENGLISH
Put the shaping disc onto the disc holder ❶ , and make sure it is firmly
1
1
2
4
fixed on the disc holder ❷ .
Note:
•
Make sure the inner
1
2
cavity of the shaping
disc and disc holder is
properly tted.
Attach the front panel to the main unit.
5
Disc holder safety switch lever
❶
Note:
•
Make sure the front panel is completely
fastened before using the appliance.
•
The front panel is heavy. Take extra caution
when assembling it.
Fasten the front panel control knobs.
6
Note:
•
If the front panel or the shaping disc is not
properly assembled, the safety switch will
prevent the appliance from working.
Close the mixing chamber lid properly.
7
Note:
•
If the mixing chamber lid is not properly
installed, the safety switch will prevent the
appliance from working.
ENGLISH 11
Using the pasta
and noodle
maker
Important
•
Make sure to follow the right order to add flour and water into the
mixing chamber. Put the flour into the mixing chamber first, then
place the chamber lid onto the chamber. Start the pasta and noodle
maker, and then slowly pour water along the entire length of the
opening in the lid.
•
Never put excessive ingredients into the pasta and noodle maker.
Otherwise, it will damage the appliance. The maximum amount of flour
used for each batch is 500g.
•
Do not put any ingredients that are 60°C / 140°F or above into the
pasta and noodle maker, nor place the pasta and noodle maker in
surroundings with high temperature (60°C / 140°F), for instance in a
high temperature sterilization. This will deform the appliance.
•
Never pour water into the mixing chamber before you place the chamber
lid onto the chamber. Do not pour any liquids into the safety switch hole.
•
Do not pour water into the mixing chamber before turning on the
pasta and noodle maker. Follow the instruction carefully to enjoy
homemade pasta/noodle.
Preparing the ingredients
Measure one full cup of flour. Scrape off
1
any excessive flour from the cup edge
with the supplied flat cleaning tool. One
full cup is equivalent to 1-2 servings.
Note:
•
Do not shake or hit the flour cup to remove
excessive flour. This will affect the flour
weight.
You can also use a kitchen scale to
measure the flour. For instance, ~250g
flour makes approximately 1-2 servings;
~
500g flour makes approximately 3-4
servings of fresh pasta/noodle.
12 ENGLISH
Remove the chamber lid.
1
2
2
Pour the flour into the chamber. If you
3
want to make 3-4 servings, add a second
cup of flour as you will need 2 cups
(~500g) of flour in total.
Close the chamber lid properly.
4
Note:
•
Insert the two hooks into the appliance first
, and then push the lid against the main
❶
unit ❷.
•
The appliance will not start working if the
chamber lid is not properly closed. During
the pasta/noodle making process, if the
chamber lid becomes loose, the appliance
will automatically stop working.
Use the “Pasta/noodle making recipe
5
table” and measure the required amount
of water.
Note:
•
Do not pour water into the mixing chamber
before turning on the pasta and noodle
maker.
•
There are 2 sets of water markings on the
supplied water cup. One set is for normal
pasta/noodle making, and the other set
is for egg pasta/noodle and other flavor
pasta/noodle making.
ENGLISH 13
Pasta/noodle making recipe table
For more information, you can visit www.philips.com/kitchen.
Flour/water ratio table
Flour
1 flour cup
(~250g)
2 flour cups
(~500g)
Normal pasta/
noodle
Water
(marking)
Amount of
water needed
for a cup of
flour (~90ml)
Amount of
water needed
for 2 cups of
flour (~180ml)
Egg pasta/
noodle
Water +
egg mixture
(marking)
Amount
of water +
egg mixture
needed for a
cup of flour
(~95ml)
Amount
of water +
egg mixture
needed for 2
cups of flour
(~190ml)
Processing
time
10 minutes
15 minutes
Output
~
300g fresh
pasta/noodle.
This is
sufficient as a
main meal for
1-2 persons,
or as a side
dish for 4-6
persons.
~
600g fresh
pasta/noodle.
This is
sufficient as a
main meal for
3-4 people,
or as a side
dish for 8-10
people.
14 ENGLISH
Important
•
The pasta/noodle recipes provided in the user manual and recipe
book have been tested for success. If you experiment with or use
other pasta/noodle recipes, the flour and water/egg ratios will
need to be adjusted to the flour and water cup ratios included with
the pasta and noodle maker. The pasta and noodle maker will not
operate successfully without adjusting the new recipe accordingly.
Note:
•
To ensure the quality of the pasta/noodle, use gluten flour to make
pasta/noodle. Follow the recommended proportion to add the
ingredients.
•
Seasonal changes and using ingredients from different regions
may affect the flour/water ratio. You may adjust based on the
recommended proportion.
•
When making the egg pasta/noodle or vegetable pasta/noodle,
make sure you whisk the egg mixture or vegetable juice evenly with
the water before pouring into the chamber through the slot in the lid.
When adding ingredients, make sure the ingredient is in a liquid form.
•
See the recipe book provided for additional pasta and noodle recipe
variations and many delicious new recipes to try.
ENGLISH 15
Selecting the pasta/noodle making program
Important
•
Do not select the extrusion-only program before the dough mixing is
complete. Otherwise, this will damage the pasta and noodle maker
and its lifetime.
•
Do not disconnect the power cord before processing is complete. If
you have to stop processing, press the on/off button to turn off
the pasta and noodle maker and then disconnect the power cord
from outlet before performing other operations.
•
To better protect the lifetime of the appliance, it is recommended
the continuous working time be less than 45 minutes. You can restart
using the appliance after a 15 minute rest.
•
If you intend to use the appliance continuously, clean the shaping
disc with the supplied cleaning tool each time after each pasta/
noodle making session. For cleaning ease, do not soak the shaping
disc directly in water.
Connect the power plug to any 240V AC
1
outlet. The pasta and noodle maker will
sound once, and all indicators will flash
once. Press the power on/off button
to switch on the pasta and noodle
maker.
Based on the amount of flour, press the
2
servings button
~ 300g or
pasta/noodle.
to select to make
to make ~ 600g of fresh
16 ENGLISH
Loading...