Philips HR1757/80, HR1757/60, HR1757/16, HR1751/60, HR1751/16 User Manual [fr]

HR1757, HR1751
2
ENGLISH 4
FRANÇAIS 20
50
67
HR1757, HR1751
áá««HHôô©©ddGG
Always unplug the appliance from the mains before assembling, disassembling or making adjustments to any of the accessories.
Keep the appliance out of the reach of children.
The motor only starts if the blender jar or the mill attachment has been correctly assembled onto the motor unit.
Make sure the blade unit is securely fastened onto the mill beaker before you screw the mill attachment onto the motor unit.
Never touch the blade unit when it is assembled on the appliance and the appliance is plugged in.
Avoid touching the cutting edges of the blade units when cleaning them.They are very sharp and you could easily cut your fingers on them.
Important
Read these instructions for use carefully and
look at the illustrations before using the appliance.
Keep these instructions for future reference.Check if the voltage indicated on the
appliance corresponds to the local mains voltage (110-127V or 220-240V) before you connect the appliance.
Never use any accessories or parts from
ENGLISH4
other manufacturers or that have not been specifically advised by Philips.Your guarantee will become invalid if such accessories or parts have been used.
Do not exceed the maximum level indicated
on the accessories.
Do not exceed the quantities and preparation
times indicated in the table.
Never remove accessories or parts from the
motor unit while the appliance is running. Always unplug the appliance first.
Never use the accessories to switch the
appliance on and off!
Never let the appliance run unattended.Do not use the appliance if the mains cord,
the plug or other parts are damaged.
If the mains cord is damaged, it must be
replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Let hot ingredients cool down before
chopping them or pouring them into the jar (max. temperature 80cC/175cF), especially for recipes that require large quantities of oil or fat.
To avoid spillage, never fill the jar beyond the
maximum level indication (1.5 litres), particularly not if you are blending hot liquids (maximum 1.1 litres).
To avoid spillage, always insert the stopper
into the lid before you start processing.
ENGLISH 5
Never reach into the jar with your fingers or
an object while the appliance is running or when the appliance is connected to the mains.
If the ingredients stick to the wall of the
blender, switch the appliance off,unplug the appliance and loosen the ingredients from the wall by adding liquid or using a spatula.
Preparing the appliance for use
Wash all accessories and detachable parts (see 'Cleaning').
C
Wind excess mains cord round the base of
the appliance.
Using the appliance
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
C
1 Mount the jar onto the motor unit. Fasten
it by turning it in the direction of the arrow.The jar is properly fixed when the notch in its lower rim is in line with the line above the buttons on the motor housing.
ENGLISH6
1
2
Do not exert too much pressure on the handle of the jar.
2 Open the lid by pressing the projection on
the side of the handle.
C
To remove the lid, open it and then pull it
upwards.
Only remove the lid for cleaning purposes.
3 Put the ingredients in the jar.
Never fill the jar with ingredients that have a temperature of over 80cC.
4 Close the lid.
C
5 Insert the stopper into the lid.
To avoid spillage, always insert the stopper into the lid before you start processing.
6 Put the mains plug in the wall socket.
C
7 Select the required setting by pressing the
appropriate button and the appliance will switch on automatically.
The speed buttons allow you to choose the
right speed to obtain optimal results. See the table for the recommended speeds.
ENGLISH 7
C
Press the pulse button (M-button) a few times
to let the appliance run for only a few seconds at a time.The appliance will stop when you release the button. Press the pulse button as often as is necessary.
Always switch the appliance off before you open the lid.
8 Press the 0-switch to switch the appliance
off.
Never switch the appliance on or off by turning the jar.
Recipes can be found in the 'Recipes' chapter below.
Tips
To avoid spillage, never fill the jar above the maximum level indication (1.5 litres), particularly not if you are blending hot liquids (maximum
1.1litres).
ENGLISH8
Speed
speed 1
speed 2
speed 3
Ingredients
liquid ingredients (e.g. chocolate milk, milk with fruit, mayonnaise)
heavier ingredients e.g. a combination of liquid and solid ingredients (e.g. tomato sauce or pate)
heavy, mainly solid ingredients (e.g. ice cubes, soups, beans, etc.)
If you are blending foaming liquids, never fill
the jar beyond the 1.2 l indication.
C
Liquid ingredients (e.g. oil) can be poured into
the blender jar through the opening in the lid while the appliance is running.
Do not let the blender run for more than 3 minutes at a time. If you have not finished blending after 3 minutes, switch the appliance off for one minute before you continue blending.
Dry ingredients must not be processed for
more than 1 minute.
Cut solid ingredients into smaller pieces
before putting them in the blender jar. Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a series of small batches instead.
If you are not satisfied with the result when
blending solid ingredients, switch the blender off and press the pulse button (M-button) a few times to let the blender run briefly.You can also stir the ingredients with a spatula (not while the blender is running!) or pour out some of the contents of the jar and process smaller amounts.
To crush ice cubes,drop max. 5 cubes per
batch through the opening in the lid onto the rotating blades.
To make tomato juice, cut the tomatoes in
four and drop the pieces through the opening in the lid onto the rotating blades.
ENGLISH 9
Never reach into the jar with your fingers or an object (e.g. a spatula) while the blender is running.
If you are processing solid and liquid
ingredients at the same time, pour the liquid ingredients in the jar before switching the appliance on.Add the solid ingredients while the appliance is running.
Filter (HR1757 only)
You can use the filter accessory to obtain
extra finely blended sauces, fresh fruit juices or cocktails.All pips and skins will be caught in the filter.
C
1 Make sure the appliance is unplugged.
Remove the blender jar from the appliance and put the filter in the blender jar.
Make sure the filter is properly fitted onto the bottom of the jar.The grooves of the filter and the ribs inside the blender jar will help you put the filter in the right position.
C
2 Put the lid on the jar to fix the filter in its
proper position.
3 Put the blender jar back on the motor unit
and insert the plug into the wallsocket.
ENGLISH10
C
4 Put the ingredients in the filter through the
opening in the lid.
Never fill the filter beyond its metal part. Do not use the filter to process hot ingredients.
5 Add water or another liquid.
C
6 Insert the stopper into the opening in the
lid and switch the appliance on. Select the highest speed and let the appliance run for max. 40 seconds.
C
7 Switch the appliance off. Pour out the
drink through the spout of the blender jar.
8 For optimal results, put the jar with the
remaining ingredients back onto the appliance and let it run for a few more seconds.
9 Pour out the rest of the drink.
Tips
Particularly when you are processing large
quantities, we advise you not to put all the ingredients in the filter at the same time. Start processing a small quantity, let the appliance run for a moment, switch it off and then add another small quantity. Repeat this procedure until you have processed all the ingredients.
ENGLISH 11
For making soy milk:
Soak soy beans for 4 hours before processing them. You can process max. 50 g. of dr y soy beans with max. 500 ml. water at a time.
For making fruit juices and cocktails:
For the best results, add approx. 300 ml water (or another liquid if you are making e.g. cocktails, etc.) to 150 g fruit.
Mill
The mill attachment can be used for grinding
and chopping ingredients such as peppercorns, sesame seeds, rice, wheat, coconut flesh, nuts (shelled), coffee beans, soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
C
1 Put the ingredients in the beaker.
Process only dry ingredients. Do not fill the beaker beyond the 'MAX' indication. See the table for the advised quantities.
ENGLISH12
Quantities and preparation times
C
2 Make sure the rubber ring on the blade
unit is properly placed.
C
3 Screw the blade unit onto the beaker.
If this requires some effort, moisten the rubber ring with a drop of water.
ENGLISH 13
Quantities
5-25 g
10-50 g
25-75 g
25-75 g
25-75 g
25-75 g
25-50 g
25-75 g
20-40 g
25-50 g
25-75 g
Ingredients
pepper corns
sesame seed
rice, wheat
soy beans
dried peas
coconut flesh
coffee beans
cheese
bread crumbs
sugar cubes
nuts (shelled)
C
4 Turn the assembled mill upside down and
screw it onto the motor unit in the direction of the arrow.
C
5 We advise you to operate the mill by
means of the pulse button (M-button).
Never use the mill for more than 30 seconds without interruption.
C
After processing, you can use the shaker lid to
sprinkle the ingredients evenly onto a dish.
Cleaning
Cleaning of the appliance, its parts and the accessories is easiest immediately after use.
Never clean the accessories or parts of the appliance in the dishwasher.
Clean the motor unit with a moist cloth.
Do not use abrasives, scourers, alcohol, etc.
1 Unplug the appliance, detach the
accessories and parts you have used and clean them in warm, soapy water.
ENGLISH14
2 Then rinse them under the tap to wash
away soap residues.
Quick cleaning of the blender jar
1 Pour lukewarm water and some washing-
up liquid into the blender jar, up to the Quick Clean level indication (500 ml) on the jar. Do not exceed this level when using the Quick Clean function.
2 Close the lid and insert the stopper into
the lid.
C
3 Press the Quick Clean button and let the
appliance run for a few moments. Stop as soon as the jar is clean.
4 Detach the blender jar and rinse it with
clean water.
C
5 Only remove the lid (by pulling it off the
blender jar) for cleaning purposes!
Cleaning the filter (HR1757 only)
1 Take the filter out of the blender jar.
2 Hold the filter over a waste bin and gently
shake out its contents.
3 Rinse the filter under the tap.
ENGLISH 15
Information & service
If you need information or if you have a problem, please visit the Philips Web site at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Depar tment of Philips Domestic Appliances and Personal Care BV.
Recipes
The hole in the lid can be used to add drops of liquid to the ingredients in the jar in order to obtain the required level of consistency.
Mayonnaise (about 300 ml)
- 2 egg yolks or 1 whole egg
- 1 tsp mustard powder
- 1 tsp salt
- 1/2 tsp pepper
- 1 tsp sugar
- 30 ml vinegar or lemon juice
- 300 ml oil
B
All the ingredients have to be at room temperature.
B
Put the egg or egg yolks in the blender jar, add salt, pepper and mustard powder and half of the vinegar or lemon juice and blend at average speed. Pour oil through the hole in the lid until the mayonnaise becomes thick.Then add the remaining vinegar or lemon juice and season according to taste.
ENGLISH16
B
Store in the refrigerator.
Carrot cake
- 4 eggs
- 200 g sliced carrot
- 200 ml milk
- 100 g condensed milk
- 300 g sugar
- 300 g wheat flour
- 150 g oil
- 1 tsp dried yeast
B
Put the eggs, the sliced carrots, the milk, the condensed milk and the sugar in the blender jar and process it for approx. 15 seconds at max. speed.
B
Add the wheat flour spoon by spoon.When the mixture has become homogeneous, gradually add the oil through the small hole in the safety lock. Finally add the dried yeast and let the appliance run for another 5 seconds.
B
Put the mixture in a baking tin and bake it at 180c for approx. 40 minutes.
Salad dressing
- 1 part vinegar or lemon
- 3 parts oil
- salt, pepper
B
Pour vinegar or lemon juice into the blender jar, add salt and pepper and switch the appliance on. Process until the salt and pepper have dissolved. Then add the oil through the hole in the lid until a homogeneous dressing has formed.
ENGLISH 17
B
You can also prepare a larger quantity of this basic dressing and store it in the refrigerator. Always shake before use to mix the ingredients.
Cheese cake
- 4 eggs
- 525 ml milk
- 75g margarine
- 90g Parmesan cheese cut into 1-cm cubes
- 440g sugar
- 290g corn flour
- 250g wheat flour
- 1 tsp baking powder
B
Put the eggs, milk, margarine, Parmesan cheese and sugar in the jar. Let the appliance run at maximum speed for 10 seconds.
B
Add the corn flour spoon by spoon and let the appliance run for 20 seconds at maximum speed. Then add the wheat flour spoon by spoon and let the appliance run for another 30 seconds at maximum speed. Add the baking powder and let the appliance run for 10 more seconds. Then turn the appliance off. Put the mixture in a baking tin that has been greased with oil or margarine and then floured. Bake the cheese cake in the oven at 200 - 210cC for approximately 35-40 minutes.
ENGLISH18
Troubleshooting guide
* If problems persist or if other problems occur, please contact the Philips
Customer Care Centre or the nearest Philips service centre.
Solution
The appliance is provided with a safety system.The appliance will not work if the accessories have not been assembled properly on the motor unit or have not been assembled at all. Check whether the accessories have been assembled properly (see various sections of these direction for use). Switch off the appliance first!
Switch off the appliance and process a smaller quantity.
This is normal. If the appliance continues to give off this smell after you have used it a few times, check whether the quantity you are processing, the processing time or the processing speed are correct.
Switch off the appliance and unplug it. Contact the nearest Philips service or take the appliance to your dealer.
Check whether the blade unit has been properly assembled onto the beaker.
Check whether the rubber ring has been properly assembled.
Make sure the rubber ring has been assembled properly.The ring should lie flat round the interface. Note: a small amount of leakage is normal.
Make sure that the filter has been assembled properly in the blender jar.
Problem
The appliance does not work
The blade unit or motor unit is blocked.
The motor unit gives off an unpleasant smell the first few times the appliance is used.
The appliance makes a lot of noise, smells, feels hot to touch, emits smoke, etc.
The mill vibrates strongly, produces a lot of noise or the blade unit is out of alignment.
Powder leaks from the mill
Although the filter has been assembled, the fruit juice or soy milk contains pulp.
ENGLISH 19
Mesures de sécurité
Débranchez toujours l'appareil avant d'assembler, désassembler ou de retirer les accessoires.
Tenez l'appareil hors de portée des enfants.
Le moteur ne fonctionne pas si le bol mixer ou le moulin n'ont pas été correctement fixés sur le bloc moteur.
Assurez-vous que l'ensemble couteaux est correctement fixé sur le moulin avant de visser le moulin sur le bloc moteur.
Ne touchez jamais l'ensemble couteaux s'il est assemblé sur l'appareil branché.
Faites attention à ne jamais toucher les lames de l'ensemble couteau pendant le nettoyage.Vous pourriez vous couper les doigts.
Important
Lisez ces recommandations ainsi que les
illustrations avant d'utiliser votre appareil.
Conservez ce mode d'emploi pour usage
ultérieur.
Avant de brancher l'appareil, vérifiez que la
tension indiquée sur l'appareil correspond à la tension du secteur de votre logement (110­127V ou 220-240V).
N'utilisez jamais des accessoires ou des
composants autres que ceux d'origine et
FRANÇAIS20
recommandés par Philips. Philips décline toute résponsabilité si ce n'était pas le cas et la garantie ne serait pas considérée comme valable.
Ne dépassez pas le repère de remplissage
maximum indiqué sur les accessoires.
Ne dépassez pas les quantités maximums et
les temps d'utilisation indiqués dans le tableau.
N'ôtez jamais les accessoires ou les
composants du bloc moteur pendant que l'appareil fonctionne. Débranchez toujours l'appareil.
N'utilisez jamais les accessoires pour mettre
en marche ou pour arrêter l'appareil!
Ne laissez jamais l'appareil fonctionner sans
surveillance.
N'utilisez pas l'appareil si le cordon
d'alimentation, la fiche ou d'autres pièces sont détériorés.
Si le cordon d'alimentation est endommagé, il
ne doit être remplacé que par Philips, par un Centre Service Agréé Philips ou par des personnes qualifiées pour éviter tout accident.
Laissez les aliments cuits refroidir avant de les
hacher ou de les verser dans le bol (température maximale 80cC/175cF), surtout si les recettes nécessitent une grande quantité d'huile ou de graisse.
Pour éviter tout débordement, ne dépassez
jamais le niveau maximum (1,5 l), surtout si vous préparez des ingrédients liquides chauds (dans ce cas le niveau max. est 1,2 l).
FRANÇAIS 21
Loading...
+ 47 hidden pages