IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following:
Read all instructions before using.
1. To protect against electrical shock, do not immerse
cord, plug, blender unit, or motor unit in water or
other liquid.
2. Close supervision is necessary when any appliance is
used by or near children.
3. Unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning.
4. Make sure the blender is in the OFF position (O)
before unplugging or plugging into any electrical outlet.
5. Avoid contacting moving parts.
6. Do not operate this appliance with a damaged cord
or plug, or after the appliance malfunctions, or has
been dropped or damaged in any manner. Return the
Blender to the retail location where it was purchased
for examination, repair, or adjustment.
7. Use this appliance only for its intended use as
described in this manual.The use of attachments,
including canning jars, is not recommended by Philips
Electronics North America Corporation, as they may
cause a risk of injury to persons.
8. Do not use outdoors or operate where oxygen is
being administered or in the presence of explosive
and/or flammable fumes.
9. Do not let cord hang over edge of table or counter,
or touch hot surfaces, including the stove.
10. This appliance is intended for household use ONLY; it
is not for commercial or industrial use.
11. Any service of the Blender should be performed by
the retail location where it was purchased.
12. To disconnect, press the "O" button to "0FF" position,
then remove plug from electrical outlet. Remove plug
by gripping the plug body and pulling it from the
outlet. Never yank or twist the cord to unplug.