Philips HQ-G164 Service Manual

Beard Trimmer - Personal Grooming Set

HQ-G 164

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features :

- 2D Contour Tracking Combs; combs adapt to the contours of
the face

- Hair Length Selector; for adjustability of the 2 comb attachments
with 5 settings each, resulting 10 different hairlengths that can be
cut between 1.5 mm and 17 mm.

- Charging indication (LED on Adapter)

- Maintenance free cutting element: no oiling required

- 3-Dimensional Rounded Chromium Steel Blades

- Nose / ear / eyebrow Grooming Attachment

TECHNICAL DATA

Power system : Rechargeable

Batteries : 1 x AA NiCd or NiMh

Charging period : NiCd / NiMh battery : 10 hours

Capacity : NiCd battery : up to 40 minutes
NiMh battery : up to 50 minutes

NOTES :

* In order to guarantee the longest possible working

life of the battery :

- do not charge for more than 24 hours

- do not keep the charging unit permanently
plugged in

- discharge the battery completely once a year by
letting the motor run until it stops

* If the battery is empty and the consumer wants to

trim his beard, the trimmer has to be charged for
at least 1.5 hours to have enough power for one
trim

* The appliance should be charged again, when not

used for a long period

Product meets the requirements regarding
interference suppression on radio and TV.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

4322 277 00908
02/04

EXPLODED VIEW + PARTS LIST HQ-G 164

4

2

7

3

1

5

8

pos description service code

1 Assy HQ-G 164 NiCd 4203 035 78330
Assy HQ-G 164 NiMh 4203 035 78340
2 Cutter 4203 035 77430
3 Small comb 4203 035 78380
4 Large comb 4203 035 78370

5 Trimmer 4203 035 78360
6 Storage Stand 4203 035 53120
7 Cleaning brush 4822 479 30183
8 Barbers comb 4203 035 78440

9 adapter NiCd / NiMh EURO 4203 035 78390
adapter NiCd UK 4203 035 78400
adapter NiCd CND 4203 035 78410
adapter NiCd USA 4203 035 78420

96

After the product has been repaired, it should

function properly and has to meet the safety

requirements as laid down and offi cally established

at this moment.