Philips HQ8865 Service Manual
Shaver
HQ 8865
SENSOTEC
Philips Domestic Appliances and Personal Care
Service Manual
SAP coding HQ 8865
HINTS FOR REPAIR:
- Remove shaving unit, to prevent damages during repairing.
- Remove screws A1 (2x).
- Take cover from housing (trimmer must be opened).
- Remove bracket large (17).
- The PCB-board can now be removed out of the housing.
- Remove the connecting strip from the motor by
dis soldering.
- Remove screws B1 (2 x), now the motor and hairchamber
can be removed out of the housing.
- Detach the motor springs (14) from the gearwheel unit with
a small screwdriver.
This product meets the requirements regarding interference suppression on radio and TV.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.
ASSEMBLY:
- Think by assembly on the hooks from the connecting strip
assy.
GENERAL:
- Rechargeable / Main shaver
- Constant motor voltage
- Electronic push on/off
- Washable
TECHNICAL DATA:
Voltage : 100 - 240 Volt 50 - 60 Hz
Motor voltage : 2,4 Volt
Speed of cutters : > 2100 r.p.m.
Shaving heads : HQ8 - 4222 036 05820
Battery capacity indication : 5 LED
Battery full indication : LED
Battery low indication : LED (red)
Charge indication : LED (green)
Battery : AA pack NiCd
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
4322 277 00773
02/11
HQ 8865
4
16
5
1
17
2
6
7
8
18
9
100
80
60
40
20
Ni-Cd
Ni-Cd
B1
19
21
10
11
3
12
+
–
1 4222 036 05770 cleaning brush
2 4222 036 06110 housing
3 4222 036 06790 power plug EUR
4222 036 03970 power plug GBR/ZAF
4222 036 04000 power plug KOR
4222 036 04020 power plug AUS
4222 036 04040 power plug PRC
4222 036 06800 power plug CAN/ROW
4 4222 036 05800 protecting cap
5 4222 036 05810 bracket
6 4222 036 05820 HQ8 shaving heads
7 4222 036 06130 mains
8 4222 036 05840 holder assy
9 4222 036 05850 hair chamber
10 4222 036 05410 driving unit
13
14
15
11 4822 466 12233 dust seal
12 4822 522 10763 pinion
13 4822 361 21783 motor
14 4822 492 71735 motor spring
15 4222 036 06000 connecting strip assy
16 4222 036 05870 trimmer assy
17 4222 036 05880 bracket large
18 4222 036 06140 spacer AA
19 4222 036 06150 2-AA pack NiCd
20 4222 036 06160 cover
21 4222 036 05910 rubber seal
A 4222 036 05920 screw J1-6
B 4222 036 05930 screw 1ADU
4222 036 05940 pouch
4222 036 06370 pouch Can/Row
20
A1
Loading...