Shaver
HQ 8850
SENSOTEC
Philips Domestic Appliances and Personal Care
Service Manual
HINTS FOR REPAIR:
-Remove shaving unit, to prevent damages during repairing.
-Remove screws A1 (2x).
-Take cover from housing (trimmer must be opened).
-Remove bracket large (17).
-The PCB-board can now be removed out of the housing.
-Remove the connecting strip from the motor by dis soldering.
-Remove screws B1 (2 x), now the motor and hairchamber can be removed out of the housing.
-Detach the motor springs (14) from the gearwheel unit with a small screwdriver.
SAP coding HQ 8850
ASSEMBLY:
-Think by assembly on the hooks from the connecting strip assy.
GENERAL: |
-Rechargeable / Main shaver
-Constant motor voltage
-Electronic push on/off
-Washable
TECHNICAL DATA: |
|
|
Voltage |
: |
100 - 240 Volt 50 - 60 Hz |
Motor voltage |
: |
2,4 Volt |
Speed of cutters |
: |
> 2100 r.p.m. |
Shaving heads |
: |
HQ8 - 4222 036 05820 |
Battery full indication |
: |
LED |
Battery low indication |
: |
LED (red) |
Charge indication |
: |
LED (green) |
Battery |
: |
AA pack NiMH (green) |
This product meets the requirements regarding interference suppression on radio and TV.
After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
4322 277 00774 02/11
Loading...