Philips HQ8845 Service Manual
Shaver
HQ 8845
SENSOTEC
Philips Domestic Appliances and Personal Care
Service Manual
HINTS FOR REPAIR:
-Remove shaving unit, to prevent damages during repairing.
-Remove screws A1 (2x).
-Take cover from housing (trimmer must be opened).
-Remove bracket large (17).
-The PCB-board can now be removed out of the housing.
-Remove the connecting strip from the motor by dis soldering.
-Remove screws B1 (2 x), now the motor and hairchamber can be removed out of the housing.
-Detach the motor springs (14) from the gearwheel unit with a small screwdriver.
SAP coding HQ 8845
ASSEMBLY:
-Think by assembly on the hooks from the connecting strip assy.
GENERAL: |
-Rechargeable / Main shaver
-Constant motor voltage
-Electronic push on/off
-Washable
TECHNICAL DATA: |
|
|
Voltage |
: |
100 - 240 Volt 50 - 60 Hz |
Motor voltage |
: |
2,4 Volt |
Speed of cutters |
: |
> 2100 r.p.m. |
Shaving heads |
: |
HQ8 - 4222 036 05820 |
Battery full indication |
: |
LED |
Battery low indication |
: |
LED (red) |
Charge indication |
: |
LED (green) |
Battery |
: |
AA pack NiCd |
This product meets the requirements regarding interference suppression on radio and TV.
After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
4322 277 00775 02/11
HQ 8845
4
5
1
2 |
6 |
|
7
8
9 |
- |
Cd |
|
|
Cd |
Ni |
|
|
|||
|
|
- |
|||
|
|
|
Ni |
|
|
|
|
|
|
|
B1
10
11
3
12 |
|
13 |
|
14 |
|
+ |
|
– |
|
15 |
A1 |
|
1 |
4222 036 05770 |
cleaning brush |
13 |
4822 361 21783 |
motor |
2 |
4222 036 06050 |
housing |
14 |
4822 492 71735 |
motor spring |
3 |
4822 219 10711 |
power plug |
15 |
4222 036 06000 |
connecting strip assy |
|
4222 036 04010 |
power plug Can/Row |
16 |
4222 036 05870 |
trimmer assy |
4 |
4222 036 05800 |
protecting cap |
17 |
4222 036 05880 |
bracket large |
5 |
4222 036 05810 |
bracket |
18 |
4222 036 05890 |
spacer AA |
6 |
4222 036 05820 |
HQ8 shaving heads |
19 |
4822 138 10334 |
2-AA pack NiCd |
7 |
4222 036 06100 |
mains |
20 |
4222 036 06080 |
cover |
8 |
4222 036 05840 |
holder assy |
21 |
4222 036 05910 |
rubber seal |
9 |
4222 036 05850 |
hair chamber |
A |
4222 036 05920 |
screw J1-6 |
10 |
4222 036 05410 |
driving unit |
B |
4222 036 05930 |
screw 1ADU |
11 |
4822 466 12233 |
dust seal |
|
4222 036 05940 |
pouch |
12 |
4822 522 10763 |
pinion |
|
4222 036 06370 |
pouch Can/Row |
16
17
18
19
21
20
Loading...