Shaver
HQ7817
AQUAGENIC
QUADRA
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
-Rechargeable shaver
-Constant motor voltage
-Electronic push on/off
-Washable
-NiCd cell 2 AA
-Charge time 8 hr
-Charging (mains) indication
Safety information
-This product meets the requirements regarding interference suppression on radio and TV.
-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
- |
Input voltage |
: 100-240 V, 50/60 Hz |
|||
- |
Motor voltage |
: 2.4 V |
|
|
|
|
|||||
|
Shaving heads |
: HQ6 - 4822 690 10214 |
|||
|
- |
||||
|
- SAP coding |
: HQ7817 |
DISASSEMBLYAND RE-ASSEMBLY ADVISE
- Think by assembly on right placing of the trimmer.
REPAIR INSTRUCTION
-Remove shaving unit, to prevent damages during repairing.
-Remove screws A1 (2x), open trimmer for screw.
-Take cover from housing (trimmer must be closed).
-Remove bracket (14 and 21).
-The PCB-board can now be removed out of the housing.
-Remove the connecting strip from the motor by dis soldering.
-Remove screws B1 (2 x), now the motor and hairchamber can be removed out of the housing.
-Detach the motor springs (17) from the gearwheel unit with a small screwdriver.
OPTIONAL (accessories)
- No specific issues
= changed
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
03/09
PARTS LIST & EXPLODEDVIEW |
HQ7817 |
|
|
|
5 |
|
25 |
|
1 |
6 |
|
26 |
||
|
||
2 |
|
|
|
7 |
|
|
8 |
|
|
9 |
|
|
10 |
|
|
11 |
|
|
B1 |
|
|
12 |
|
3 |
|
19
20
21
23
NiCd
22
4
|
|
+ |
|
|
|
|
– |
Pos |
Service code |
Description |
|
1 |
4822 479 30183 |
cleaning brush |
|
2 |
4222 036 09780 |
housing |
|
|
4222 036 06780 |
housing |
NOR |
3 |
4822 466 12232 |
rubber seal |
|
4 |
4222 036 08930 |
power plug |
JAP |
5 |
4222 036 06550 |
protecting cap |
|
6 |
4222 036 06560 |
bracket |
|
7 |
4822 690 10214 |
HQ6 shaving heads |
|
8 |
4222 036 06820 |
power modul |
|
9 |
4822 402 11319 |
retaining bracket |
|
10 |
4222 036 06600 |
hair chamber |
|
11 |
4822 265 11548 |
connecting pins |
|
12 |
4822 522 10762 |
driving unit |
|
13 |
4222 036 04210 |
sealing plate |
|
14 |
4222 036 06610 |
bracket small |
|
= changed
13
14
15
16
17 |
|
24 |
|
|
|
18 |
|
A1 |
|
|
|
Pos |
Service code |
Description |
15 |
4822 522 10763 |
pinion |
16 |
4822 361 21783 |
motor |
17 |
4822 492 71735 |
motor clamp |
18 |
4222 036 06700 |
connecting strip assy |
19 |
4222 036 06630 |
trimmer assy |
20 |
4222 036 06640 |
trimmer slide assy |
21 |
4222 036 06650 |
bracket large |
22 |
4222 036 06710 |
spacer AA |
23 |
4822 138 10727 |
2-AA pack NiCd |
24 |
4222 036 08250 |
cover |
25 |
4222 036 02950 |
spring hinge |
26 |
4222 036 07330 |
unlock knob |
A1 |
4822 502 14657 |
S.t. screw spec/T8 |
B1 |
4822 502 14544 |
S.t. screw 1,8 x 18/T8 |
|
4222 036 06680 |
pouch |