Philips HQ6846A Service Manual
Service
Service
Shaver
HQ 6846/A
Service
Service
Information
!
Domestic Appliances and Personal Care
HINTS FOR REPAIRS
-
Remove the shaving unit, to prevent damages
during repairs.
-
Remove screws A1 (2x, of which 1 is under
trimmer slide).
-
Take cover with trimmer from housing.
-
Remove bracket (14 + 21).
-
The PC-board can now be removed from the
housing.
-
Remove screws B1 (2x) the motor and hairchamber can now be removed from the housing.
-
Detach the motor clamping spings (item 17)
on the bearing block with a small screwdriver.
GENERAL
• Mainsshaver possible.
• Converts input voltage 8-16V dc to constant
Charge current (NiHH 1100mA, NiCD 680mA)
or Constant motorvoltage at mainsshave.
Start-up voltage min. 11V.
• Open battery protection.
• Undervoltage protection.
• Charge condition of battery is managed by Robin IC
(custom IC). Charging time is determined by temperature
(absolute or delta). Discharging time is determined by
voltage level (BLI).
• Temperature (absolute or delta).
• Green LED for mains (input voltage present) and full
(flashing). Red BLI LED (Battery Low Indication).
• Electronic on/off.
QUADRA ACTION
TECHNICAL DATA
Voltage
Power consumption
Motor voltage
Power supply
Speed of cutters
Shaving heads
Battery
SAP CODING: 8856 846 99999
CAUTION!
WHILE CHECKING THE P.C.-BOARD REMEMBER
THAT MOST COMPONENTS AND MOTOR ARE
ENERGIZED BY MAINS VOLTAGE.
:
100-240 V 50/60Hz
:
Motor depending
:
2.4 V
:
SMPS
:
> 2100 r.p.m.
:
HQ6 - 4822 690 10214
:
Green NiCd pack AA
PRODUCTS MEETS THE REQUIREMENTS REGARDING
INTERFERENCE SUPPRESION ON RADIO AND TELEVISION.
- AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD
FUNCTION PROPERLY AND HAS TO MEET THE SAFETY
REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED
AT THIS MOMENT.
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification
©
4322 277 00136
99/12
PCS 104 733
HQ 6846/A
5
19
6
1
2
7
20
21
8
22
9
10
NiCd
23
B1
11
12
3
4
1 4822 479 20261 cleaning brush
2 4822 441 12346 housing Nor.
3 4822 466 12232 rubber seal
4 4822 219 10715 power plug Nor.
5 4822 462 11177 protecting cap
6 4822 441 12327 head housing
7 4822 690 10214 HQ6 shaving head
8 4822 214 13055 power module
9 4822 402 11319 retaining bracket
10 4822 442 01826 hairchamber Nor.
11 4822 265 11548 connecting pins
12 4822 522 10762 gearwheel unit
13 4822 466 12233 sealing plate
14 4822 402 11318 bracket small
13
14
15
16
17
18
15 4822 522 10763 pinion
16 4822 361 21783 motor
17 4822 492 71735 motor clamp
18 4822 130 34167 Zener diode
19 4822 690 10216 trimmer
20 4822 463 11258 trimmer slide
21 4822 402 11317 bracket large
22 4822 532 13149 spacer AA
23 4822 138 10727 NiCD cell 2xAA
24 4822 442 01828 cover
A 4822 502 14657 s.t.screw spec/T8
B 4822 502 14544 s.t.screw 1.8x18/T8
4822 600 10859 pouch Nor.
24
A1
4822 736 16917 DFU (1)
(1) Nor.
* 4222 036 01970 Car cord
PCS 104 733
Loading...