Philips HQ6828 Service Manual

Shaver

HQ6828

QUADRA ACTION

Service
Information

!

Philips Domestic Appliances and Personal Care

Service
Information

!

Service Manual

SAP coding HQ 6828

HINTS FOR REPAIRS

- Remove the shaving unit, to prevent damages
during repairs.

- Remove screws A1 (2x, of which 1 is under
trimmer slide).

- Take cover with trimmer from housing.

- Remove bracket (14 + 21).

- The PC-board can now be removed from the
housing.

- Remove screws B1 (2x) the motor and hair­chamber can now be removed from the housing.

- Detach the motor clamping spings (item 17)
on the bearing block with a small screwdriver.

TECHNICAL DATA

Voltage : 100-240 V 50/60 Hz
Power consumption : Motor depending
Motor voltage : 2.4 V
Power supply : SMPS
Speed of cutters : > 2100 r.p.m.
Shaving heads : HQ6 - 4822 690 10214
Battery : Green NiCd pack AA

GENERAL

• Mainsshaver possible.

• Converts input voltage 8-16 V dc to constant
Charge current (NiMh 1100 mA, NiCD 680 mA)
or Constant motorvoltage at mainsshave.
Start-up voltage min. 11 V.

• Open battery protection.

• Undervoltage protection.

• Charging time is determined by
Temperature (absolute or delta).

• Green mains LED (input voltage present).

• Electronic on/off.

This product meets the requirements regard­ing interference suppression on radio and TV.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.

4322 277 00939
02/12

HQ6828

If the HQ6828 shaver is supplied with a HQ8000 powerplug, remove R35 from the PCB.

Removing R35 will not adversely affect the shaver’s performance.

If the shaver has been supplied with a HQ8000 plug, R35 and its surrounding will look burned. See picture.

If the customer complaint can be related to battery capacity, also replace the battery.

HQ6828

5

19

6

1

2

7

20

21

8

22

9

10

NiCd

23

B1

11

12

3

4

1 4822 479 20261 Cleaning brush
2 4222 036 05330 Housing
3 4822 466 12232 Rubber seal
4 4822 219 10722 Power plug
5 4822 462 11177 Protecting cap

6 4822 441 12327 Head housing
7 4822 690 10214 HQ6 shaving heads
8 4822 214 13049 Power modul
9 4822 402 11319 Retaining bracket
10 4822 442 01826 Hair chamber

11 4822 265 11548 Connecting pins
12 4822 522 10762 Gearwheel unit
13 4822 466 12233 Sealing plate
14 4822 402 11318 Bracket small
15 4822 522 10763 Pinion

13

14

15
16

17

18

16 4822 361 21783 Motor
17 4822 492 71735 Motor clamp
18 4822 130 34167 Zener diode
19 4822 690 10216 Trimmer
20 4822 463 11258 Trimmer slide

21 4822 402 11317 Bracket large
22 4222 036 03020 Spacer AA
23 4822 138 10727 NiCd pack AA
24 4222 036 05340 Cover
25 4222 036 02950 Hinge spring

26 4222 036 02960 Lock part

A 4822 502 14657 S.t. screw spec/T8
B 4822 502 14544 S.t. screw 1,8 x 18/T8
4222 036 01970 Car cord
4822 600 10859 Pouch

24

A1