Philips HQ6825A Service Manual

Shaver

HQ6825/A

QUADRA ACTION

Service
Information

!

Philips Domestic Appliances and Personal Care

Service
Information

!

Service Manual

HINTS FOR REPAIRS

- Remove the shaving unit, to prevent damages
during repairs.

- Remove screws A1 (2x, of which 1 is under
trimmer slide).

- Take cover with trimmer from housing.

- Remove bracket (14 + 21).

- The PC-board can now be removed from the
housing.

- Remove screws B1 (2x) the motor and
hairchamber can now be removed from the
housing.

- Detach the motor clamping spings (item 17) on
the bearing block with a small screwdriver.

TECHNICAL DATA

Voltage : 100-240 V 50/60Hz
Power consumption : Motor depending
Motor voltage : 2.4 V
Power supply : SMPS
Speed of cutters : > 2100 r.p.m.
Shaving heads : HQ6 - 4822 690 10214
Battery : Green NiCd pack AA

SAP CODING : 8856 825 99999

GENERAL

• Mainsshaver possible.

• Converts input voltage 8-16V dc to constant
Charge current (NiMH 1100mA, NiCd 680mA)
or Constant motorvoltage at mainsshave.
Start-up voltage min. 11V.

• Open battery protection.

• Undervoltage protection.

• Charging time is determined by
Temperature (absolute or delta).

• Green mains LED (input voltage present).

• Electronic on/off.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

This product meets the requirements regard­ing interference suppression on radio and TV.

After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.

4322 277 00133
02/12

HQ6825/A

If the HQ6825/A shaver is supplied with a HQ8000 powerplug, remove R35 from the PCB.

Removing R35 will not adversely affect the shaver’s performance.

If the shaver has been supplied with a HQ8000 plug, R35 and its surrounding will look burned. See picture.

If the customer complaint can be related to battery capacity, also replace the battery.