Philips HQ6762 Service Manual

Rechargeable shaver
HQ6762
CoolSkin
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
- This product meets the requirements regarding interference suppression on radio and TV.
TECHNICAL INFORMATION
- Input voltage : 100-240 V, 50/60 Hz
- Power consumption : max. 7 W
- Motor voltage : 2.4 V
- Battery : 2x NiMH AA
- Battery capacity : approx. 1100 mAh
- Charging indicator : 1x duoLED green / red : charge - full / battery low
- Charging time : approx. 1 hour
- Charging current : 1000/40 mA temp. dependent
- Charging device : HQ600 external transformer
- Shaving heads : HQ167 - 4222 036 04250
- Shaving emulsion : HQ160 shaving emulsion : HQ161 fresh gel
- Mains shaving : no
- SAP coding : HQ6762
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Remove the shaving unit to prevent damage during repair.
- Remove the outer cover (item 27) and cartridge (item 28).
- Remove 5 A1 screws.
REPAIR INSTRUCTION
- After the cover (item 16) has been removed, it must be checked if its sealing has not been damaged.
- The cover (item 16) contains a sticker that is permeable to gas yet impermeable to water. This sticker may not be removed under any circumstances.
- Unsolder the motor connector and remove the PCB.
- To replace the motor (item 10) or the driving unit (item 6), screws B1 must be removed fi rst. Then push the entire unit out of the housing (item 12) and check if its sealing is damaged.
- The entire driving unit (item 6) is supplied as a single part to guarantee optimal sealing of the gear shafts.
- A replacement of the pump button (item 22) is only possible after removal of the hair chamber (item 5).
- To guarantee that the shaver is completely watertight, only the original screws may be used.
- To charge the shaver only the original HQ600 power plug may be used.
OPTIONAL (accessories)
- No specifi c issues
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
4322 277 01070 02/10
EXPLODED VIEW & PARTS LIST
HQ6762
1 12
2
3
13
4
5
14
15
22
B1
23
24
25
NiMH
26
6
7
8
9
10
11
Pos Service code Description
4222 036 04140
1
4222 036 04260
2
4222 036 04250
3
4222 036 04270
4
4222 036 04240
5
4222 036 04200
6
4222 036 04210
7
4822 522 10763
8
4822 492 71735
9
4822 361 21783
10
4822 479 30183
11
4222 036 08140
12
4222 036 04230
13
4822 265 11548
14
4822 256 10454
15
4222 036 08150
16
4222 036 04190
17
protecting cap neptunus head housing shaving head retaining bracket hair chamber
gearwheel unit sealing plate pinion motor clamp motor 2,4 V
cleaning brush housing power modul connector holder
cover Norelco release knob
16
17
18
20
21
A1
Pos Service code Description
18 20 21 22 23
24 25 26 27 28
30
A B
4222 036 04100 4222 036 06700 4222 036 04130 4222 036 04170 4222 036 04110
4222 036 04220 4822 138 10728 4822 360 10389 4222 036 04150 4222 036 08160
4222 036 04400 4222 036 08170 4222 036 04080 4222 036 04850
4822 502 14545 4822 502 14544
stand motor connector hanging cord pump button trimmer assy
battery holder NiMh pack AA pump outer cover HQ160 shaving emulsin
HQ160 shaving emulsin HQ160 shaving emulsin power plug EUR power plug GBR
s.t.screw spec s.t.screw 1.8 x 1.8/T8
27
28
30
Loading...