Philips HQ6705 Service Manual
Rechargeable shaver
HQ6705
CoolSkin
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Input voltage : 100-240 V, 50/60 Hz
- Power consumption : max. 9 W
- Motor voltage : 2.4 V
- Battery : 2x NiCd AA
- Battery capacity : approx. 700 mAh
- Charging indicator : 1x LED green
- Charging time : approx. 8 hours
- Charging current : 120 mA continuous
- Charging device : HQ600 external transformer
- Shaving heads : HQ167 - 4222 036 04250
- Shaving emulsion : HQ160 shaving emulsion
: HQ161 fresh gel
- Mains shaving : no
- SAP coding : HQ6705
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Remove the shaving unit to prevent damage during repair.
- Remove the outer cover (item 27) and cartridge (item 28).
- Remove 5 A1 screws.
REPAIR INSTRUCTION
- After the cover (item 16) has been removed, it must be
checked if its sealing has not been damaged.
- The cover (item 16) contains a sticker that is permeable
to gas yet impermeable to water.
This sticker may not be removed under any circumstances.
- Unsolder the motor connector and remove the PCB.
- To replace the motor (item 10) or the driving unit (item 6),
screws B1 must be removed first.
Then push the entire unit out of the housing (item 12) and
check if its sealing is damaged.
- The entire driving unit (item 6) is supplied as a single part
to guarantee optimal sealing of the gear shafts.
- A replacement of the pump button (item 22) is only
possible after removal of the hair chamber (item 5).
- To guarantee that the shaver is completely watertight, only
the original screws may be used.
- To charge the shaver only the original HQ600 power plug
may be used.
OPTIONAL (accessories)
- No specific issues
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/06
PARTS LIST & EXPLODED VIEW
HQ6705
1
2
3
4
5
6
12
13
14
15
22
B1
24
25
NiCd
26
A1
7
8
9
10
11
Pos Service code Description
1
4222 036 04140
2
4222 036 04260
3
4222 036 04250
4
4222 036 04270
5
4222 036 04240
6
4222 036 04200
7
4222 036 04210
8
4822 522 10763
9
4822 492 71735
10
4822 361 21783
11
4822 479 30183
12
4222 036 05040
13
4222 036 05050
14
4822 265 11548
15
4822 256 10454
16
4222 036 05060
17
4222 036 04190
protecting cap neptunus
head housing
HQ167 shaving head
retaining bracket
hair chamber
gearwheel unit
sealing plate
pinion
motor clamp
motor 2,4 V
cleaning brush
housing EUR
power modul
connector
holder
cover
release knob
16
17
18
19
20
21
Pos Service code Description
18
4222 036 04100
20
4222 036 06700
21
22
4222 036 04170
23
24
4222 036 04220
25
4822 138 10334
26
4822 360 10389
27
4222 036 04150
28
4222 036 04400
4222 036 04410
29
30
4222 036 03690
4222 036 03790
A
4822 502 14545
B
4822 502 14544
stand
motor connector
n/a
pump button
n/a
battery holder
NiCd pack AA
pump
outer cover
HQ160 shaving emulsion
HQ161 fresh gel
n/a
power plug EUR
power plug CAN
s.t.screw spec
s.t.screw 1.8 x 1.8/T8
27
28
30
Loading...