Philips HQ6466A Service Manual
Shaver
HQ 6466/A
QUADRA ACTION
Service
Information
!
Philips Domestic Appliances and Personal Care
Service Manual
Mains
R1
D4
C1 C2
R5
C4
R4
Power plug
L1
IC3
1
DRN
SRC
2
VAUX
GND
3
NC
CBT
R6
GND
4
RREF
D3
T1
C7
D1
D2
D5
8
R2
5
7
6
C3
D6
C8
R3
D1
C1
C6
C5
R1
Power module
TIPS FOR REPAIR
- Remove the shaving unit to prevent damage during repair.
- Remove screws A1 (2x, of which 1 is under trimmer slide).
- After the cover (item 26) has been removed, it must be
checked if the rubber seal (item 3) has not been damaged.
- The cover contains a sticker that is permeable to gas
yet impermeable to water.
This sticker may nor be removed under any circumstances.
- Remove the metal brackets.
- Unsolder the motor connector and remove the PCB.
- To replace the motor (item 20) or the driving unit (item 16),
screws B1 must be removed fi rst.
- Then push the entire unit out of the housing (item 2) and
check if its sealing is damaged.
- Detach the motor clamping springs (item 21) with a small
screwdriver.
- The entire driving unit (item 16) is supplied as a single part
to guarantee optimal sealing of the gear shafts.
- To guarantee that the shaver is completely watertight, only
the original screws may be used.
- Only the original HQ6000 power plug may be used.
C3
R4
SK1
C2
R2
R3
TS2
R14
D2
R9R5
TS3
TS1
C4
R8
R12
R10
C5
TS4
D3
R11
TECHNICAL DATA
Input voltage : 100-240 V, 50/60 Hz
Power consumption : max. 7 W
Motor voltage : approx. 6.5 V
Power supply : HQ6000 external transformer
Shaving heads : HQ6 - 4822 690 10214
Cleaning : wet / dry
Comfort control : fi xed setting
: 3-D contour following
SAP CODING : HQ6466
C43
PM
L1
TS7
R13
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
4322 277 00591
01/04
HQ 6466/A
6
22
7
8
27
10
9
1
2
11
23
24
12
13
25
27
14
B1
27
15
3
16
5
4
C1
1 4822 479 20261 cleaning brush
2 4222 036 04610 housing PH
3 4822 466 12232 rubber seal
4 4822 219 10711 power plug EU
4822 219 10715 power plug GB
5 4222 036 03160 curled fl ex
6 4822 462 11177 protecting cap
7 4222 036 02950 hinge spring
8 4822 441 12327 head housing
9 4822 122 30103 cer. cap. 22nF/63V
10 4822 265 11613 connector
11 4822 690 10214 HQ6 shaving head
12 4822 214 13053 power module
13 4822 402 11319 retaining bracket
14 4822 442 01829 hair chamber PH
15 4822 265 11548 connecting pins
17
18
19
20
21
26
A1
16 4822 522 10762 gearwheel unit
17 4822 466 12233 sealing plate
18 4822 402 11318 bracket small
19 4822 522 10763 pinion
20 4822 361 11177 motor
21 4822 492 71735 motor clamp
22 4822 690 10216 trimmer
23 4822 463 11258 trimmer slide
24 4822 402 11317 bracket large
25 4822 532 13151 spacer 4/5A
26 4222 036 04600 cover
27 4222 036 02960 lock parts
A 4822 502 14657 s.t.screw spec/T8
B 4822 502 14544 s.t.screw 1.8x18/T8
C 4822 502 30526 s.t.screw 1.8x10/T8
4822 600 10856 pouch PH
Loading...