Shaver
HQ5812
Micro Action Plus
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
-This product meets the requirements regarding interference suppression on radio and TV.
-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
- |
Voltage |
: 100-240 V 50/60 Hz |
||
- |
Power consumption |
: Motor depending |
||
- |
Motor voltage |
: 1,2 V |
|
|
|
||||
- |
Power system |
: Rechargeable / Mains |
||
- |
Shaving heads |
: HQ5+ - 4222 036 05450 |
||
- SAP coding |
: HQ5812 |
|||
DISASSEMBLYAND RE-ASSEMBLY ADVISE
-Remove shaving unit, to prevent damages during repairs.
-Remove the screws A1 (2 x).
-Remove cover. (see Fig. 1)
-To remove the trimmer, first disassemble the trimmer slide by pushing down the locking pegs (2 x “X” in exploded view) and move the slide slightly outwards.
-Make room between trimmer
and cover with a small screwdriver (“Y” in exploded view).
- Remove screws B1 (2 x).
- The PC-board with motor
Fig. 1
and hairchamber can now be removed from the housing.
-Detach the motor clamping springs (item 17) on the bearing block with a small screwdriver.
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- No specific issues
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
04/01
Loading...