Philips HQ5401A Service Manual

Service

Shaver

HQ 5401/A

Service

Domestic Appliances and Personal Care

HINTS FOR REPAIRS

Remove the shaving unit, to prevent damages during repairs.

Remove screws A1 (2x, of which 1 is under trimmer slide).

Remove the covers (item 19 and item 18) from the shaver.

To remove the trimmer, first disassemble the trimmer slide by pushing down the locking pegs (2x ”X” in exploded view) and move the slide slightly outwards.

Make room between trimmer and cover with a small screwdriver (”Y” in exploded view).

Remove screws B1 (2x) and holder (item 17).

The PC-board with motor and hairchamber can now be removed from the housing.

Detach the motor clamping spings (item 13) on the bearing block with a small screwdriver.

100-240 V

4859 4852 4853

ECLIPSE

SK1

D1 D4

16 15 14 13 12 11 10 9

12345678

IC1

C3R3

TECHNICAL DATA

GENERAL

The functions of the SMPS-unit (Switched Mode Power Supply) are the following: a.

Changes the connected mains voltage into a DC voltage for the supply of the motor through a switching transistor (incorporated in IC1).

Controls the average supply voltage of the motor so that the rpm remains constant with a heavier load (e.g. due to heavy beard or polluted shaving heads.)

When the motor is blocked, it limits the current flowing through the motor.

Prevents the SMPS-unit from being damaged in case of a short circuit.

Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification

Voltage Power consumption Motor voltage Power supply Shaving heads Comfort control

SAP CODING

CAUTION! WHILE CHECKING THE P.C.-BOARD REMEMBER THAT MOST COMPONENTS AND MOTOR ARE ENERGIZED BY MAINS VOLTAGE.

100-240 V 50/60Hz

Motor depending

54 V

SMPS

HQ5 - 4822 690 30481

fixed setting

HQ5401

4322 277 00024 99/06

PCS 101 507

HQ 5401/A

6 7

1 2

1 4822 479 30183 cleaning brush 2 4822 522 10512 hair chamber complete 3 4222 036 00050 housing PH 4 4822 462 11185 protecting cap 5 4822 441 12358 head housing

6 4822 690 30481 HQ5 shaving head 7 4822 214 11416 power supply 8 4822 404 40855 retaining bracket 9 4822 268 10348 inlet 10 4822 466 10937 sealing plate

12 13

14 15

16 4822 492 62703 contact spring 17 4822 256 92352 holder 18 4222 036 00060 cover 19 4822 441 11579 inlet cover 20 4822 690 10218 trimmer

21 4822 321 10095 flex EU 4822 321 10096 flex GB 4822 321 10148 flex AUS/NZ 4822 321 10344 flex USA/CDN A 4822 502 30785 orn.screw 1.8x10/T8

18 19

4222 036 01040 DFU (4) 4222 036 01050 DFU (5)

(1) GB D F NL E P I TR (2) GB D N S FIN DK GR (3) GB Arab Farsi E P/BR F (4) GB RUS UA HR SLO CZ SK H RO (5) GB RUS PL EST LV LT

11 4822 522 33605 pinion 12 4822 361 30455 motor 13 4822 492 71735 motor clamp 14 4822 122 31177 capacitor 15 4822 362 40181 carbon brush

PCS 101 508

B 4822 502 30526 s.t.screw 1.8x10/T8 4222 036 00040 pouch PH 4222 036 00010 DFU (1) 4222 036 00020 DFU (2) 4222 036 00030 DFU (3)